Consider the stratified soil sample shown below with k₁ = 0.01 cm/sec, k₂ = 0.02 cm/sec, H₁ = 10 cm, and H₂ = 20 cm. 1. Determine the equivalent coefficient of hydraulic conductivity of the soil sample, keq 2. Determine the head at B (at soil 1/soil 2 interface), hs, given ha = 100 cm and hc = 0

Consider the stratified soil sample shown below with k₁ = 0.01 cm/sec, k₂ = 0.02 cm/sec, H₁ = 10 cm, and H₂ = 20 cm. 1. Determine the equivalent coefficient of hydraulic conductivity of the soil sample, keq 2. Determine the head at B (at soil 1/soil 2 interface), hs, given ha = 100 cm and hc = 0

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter7: Permeability

Section: Chapter Questions

Problem 7.14P

See similar textbooks

Similar questions

Refer to Figure 7.24. The following data were collected during the field permeability measurement of a confined aquifer using a pumping test. Determine the hydraulic conductivity of the permeable layer. Use Eq. (7.49). Thickness of the aquifer, H = 4.5 m Piezometric level and radial distance of the first observation well: h1 = 2.9 m; r1 = 17.8 m Piezometric level and radial distance of the second observation well: h2 = 1.8 m; r2 = 8.1 m Rate of discharge from pumping, q = 0.5 m3/min
Q:5 a)Find out the flow rate from a soil when hydraulic conductivity is 2.5x10^-3 cm/sec while the length of soil sample is 11 cm, dia of soil sample is 5 cm, change in head observed is 3 cm.
For a falling head laboratory test, the following are the given values:• Length of soil specimen = 480.0 mm• Initial head = 700.00 mm• Final head = 395.00 mm• Duration of test = 5.5 mins• Area of standpipe = 0.97 sq.cm• Area of specimen = 18.0 sq.cmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the head difference at t = 3.50 mins.
The following data are for a falling-head permeability test:• Length of the soil sample = 150 mm• Area of soil sample = 1964 mm^2• Area of the standpipe = 25 mm^2• At time t = 0, head difference = 400 mm• At time t = 8 min, head difference = 200 mma. Determine the hydraulic conductivity of the soil (cm/sec). (ans. 2.75x10^-4 cm/s)b. What was the head difference at t = 6 min? (ans. 23.82cm)
The figure below shows the layers of soil in a tube 100 mm x 100 mm in cross section. Water is supplied to maintain a constant head difference of H across the sample. Hydraulic conductivities of each soil are tabulated below. All measurements in the figure are millimeters. If H = 1.98 and the Hydraulic conductivity of soil E is 0.002 m/s. a. Determine the equivalent hydraulic conductivity of the system in the direction of the flow. b. Find the h1 and h2. c. Determine the rate of flow.
For a falling head laboratory test, the following are the given values:• Length of soil specimen = 210.00 mm• Initial head = 523.00 mm• Final head = 297.00 mm• Duration of test = 3.50 mins• Area of standpipe = 42.0 sq.mm• Area of specimen = 1050.00 sq.mmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the seepage velocity if n=0.35C. Determine the head difference at t = 120 sec
L = 370 mm A = 145 cm^2 h = 340 mm Water collected in 3 min Q = 580 cm^3 Void ratio of sand e= 0.66 Determine the Hydraulic conductivity and seepage velocity.
The following data are for a falling-head permeability test:• Length of the soil sample = 140 mm• Diameter of soil sample = 70 mm• Area of the standpipe = 19.6 mm2• At time t = 0, head difference = 500 mm• At time t = 7 min, head difference = 350 mma. Determine the hydraulic conductivity of the soil (cm/sec)b. What was the head difference at t = 5 min?
For a falling head permeability test, these valueare given: Length of the soil specimen = 200 mm Area of the soil specimen = 1000 mm2 Area of the standpipe = 40 mm2 Head difference at time, t = 0 min is 500 mm Head difference at time, t = 3 min is 300 mm1. Determine the hydraulic conductivity of thesoil in cm/sec.2. What was the head difference at time, t =100 sec?
Solve for the ratio of equivalent hydraulic conductivity with the following given: h1 = 2 m h2 = 2.5 m h3 = 1.8 m h4 = 0.9 m k1 = 1.5E-3 cm/sec k2 = 2.2E-4 cm/sec k3 = 1.6E-4 cm/sec k4 = 4.0E-4 cm/sec What is the equivalent coefficient of permeability if the water flows perpendicular to the layer of soil (KeqV) in cm/sec?
Consider two horizonal soil layers, each is isotropic, the upper layer 1 is sitting directly on the top of bottom layer 2. Layer 1 has a thickness of 2 m and a hydraulic conductivity of 0.26 m/day and layer 2 has a thickness of 4 m and a hydraulic conductivity of 0.95 m/day. In this case, calculate the equivalent horizontal hydraulic conductivity in m/day.
1. Calculate the equivalent hydraulic conductivity for the soil profile shown in figure 2. An excavation is proposed for a square area near the bend of a river, as shown in figure. It is expected that the flow of water into the excavation will come through the silt layer. Pumping test reveal an average horizontal hydraulic conductivity of 2 x 10 -5 cm/s in the silt layer. The excavation has to be kept dry. Determine the flow (qs) into the excavation.