Consider the tank shown in (Figure 1). Take p. = 900 kg/m³, p = 1000 kg/m³, and pHg = 13 550 kg/m³. Figure 0.6 m 0.8 m 1 of 1 > 100 mm h Part A Determine the level h' of water in the tube if the depths of oil and water in the tank are 0.6 m and 0.8 m, respectively, and the height of mercury in the tube is h = 0.055 m. Express your answer to three significant figures and include the appropriate units. h' = Submit Value Provide Feedback Request Answer Units ? Next >

Consider the tank shown in (Figure 1). Take p. = 900 kg/m³, p = 1000 kg/m³, and pHg = 13 550 kg/m³. Figure 0.6 m 0.8 m 1 of 1 > 100 mm h Part A Determine the level h' of water in the tube if the depths of oil and water in the tank are 0.6 m and 0.8 m, respectively, and the height of mercury in the tube is h = 0.055 m. Express your answer to three significant figures and include the appropriate units. h' = Submit Value Provide Feedback Request Answer Units ? Next >

Name: Consider the tank shown in(Figure 1). Take po = 900 kg/m³, pw = 1000
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Consider the tank shown in(Figure 1). Take po = 900 kg/m³, pw = 1000 kg/m³,and pHg = 13 550 kg/m³.Figure0.6 m0.8 m ▼ Part ADetermine the level h' of water in the tube if the depths of oil and water in the tank are 0.6 m and 0.8 m, r

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

kindly help me with this problems INSTRUCTIONS: Solve the problems neatly and systematically. SUse free-floating decimals in all your calculations and in expressing your answers. Box your final answers. 2. Water in a partially filled large tank is to be supplied to the rooftop, which is 8 m above the water level inthe tank, through a 2.5 cm internal diameter pipe by maintaining a constant air pressure of 300 kPa (gauge) inthe tank. If the head loss in the piping system is 2 m of water, determine the discharge rate of the supply ofwater to the rooftop in L/s
The drinking water needs of an office are met bylarge water bottles. One end of a 0.35-in-diameter, 6-ft-longplastic hose is inserted into the bottle placed on a high stand,while the other end with an on/off valve is maintained 3 ftbelow the bottom of the bottle. If the water level in the bottle is1 ft when it is full, determine how long it would take to fill an8-oz glass (= 0.00835 ft3) (a) when the bottle is first openedand (b) when the bottle is almost empty. Take the total minorloss coefficient, including the on/off valve, to be 2.8 when it isfully open. Assume the water temperature to be the same as theroom temperature of 70°F.
A venturi meter is used to measure the flow rate of water at 55 degrees Celsius. The venturi meter has a throat diameter of 75mm, and it is situated in a 250-mm pipeline. A mercury (SG = 13.6) manometer measures the pressure difference, and the reading is 24 mm. Determine a.) the Reynolds number of the flow, b.) the average velocity, c) the volumetric flow rate, and d.) the power loss if 12% of the pressure drop is permanently lost.
Q1: In a venturemeter used for measuring the flow ofoil (-0.85) through a horizontal pipeline, the pipe diameter is 2.4 times the diameter at the throat. Connections are made from the entrance to the meter and the throat to a vertical L tube containing mercury If the difference level between the fluids in the U - tube arms is (x +) in em, where S.N. is student serial number. Neglect friction in the pipe. Find an expression in terms of x for the velocity of the oil in the pipe.
Given below are pipe lengths, sizes, and connections. All pipes have a friction factor of 0.020. If the flow from Ato B is 5 cfs. a) Determine the head loss in feet in PIPE 1 and PIPE 2 b) Determine the head loss in feet in PIPE 5 c) Determine the flow in the upper branch pipe Q2 in cubic feet per second d) Determine the total head loss in feet between the inlet A and the outlet D
An orifice of diameter 150 mm is fitted at the bottom of a boiler drum lenth 6 m and of diameter 2 m. The drum is horizontal and contains water up to height of 1.8 m. Find the time required to empty the boiler. Take Cd=o 0.60. a.127 seconds b.467 seconds c.175 seconds d.217 seconds
A Venturi Tube develops low pressure on its throat, which can suck water from a deposit located under it. Assuming permanent flux with no losses, calculate the V1 necessaryto suck water from the deposit to the throat. D1 = 15 [mm]; D2 = 37 [mm]; h = 163 [mm]; pa = 101325 [Pa] (atmospheric pressure). Express the solution in [m/s]
An orifice of diameter 150 mm is fitted at the bottom of a boiler drum lenth 6 m and of diameter 2 m. The drum is horizontal and contains water up to height of 1.8 m. Find the time required to empty the boiler. Take Cd=o 0.60. Include FBD. a. 127 seconds b. 217 seconds c. 467 seconds d. 175 seconds
Water flows steadily into the Venturi tube in the following figure. In the section considered, negligible friction losses and uniform properties in the sections are assumed. The entrance area (A1) is 20 cm2, while the throat area is A2 = 10 cm2. A pressure gauge whose manometric fluid is mercury (Yhg = 136,000 N / m3) is connected between the inlet sections and the throat, as seen in the figure. The flow of water that flows through the Venturi tube is requested (γH2O = 10,000 N / m3. Answer .: ϕ = 5.8 L / s.
A pipe with unequal ends is used to transport a fluid. The pipe diameter at the larger end is 0.67 cm and the other end is 0.29 cm. The larger and smaller ends are located 9 m and 3 m, respectively, from the datum line. If the flow at the 9 m datum line is 1.48 m/s and the pressure is 5156 kN/m2, compute for the pressure, in kPa, at the smaller end. Express your answer in 3 decimal places.
Determine the NPSH available to avoid the formation of cavitation in the system, water T° 13°C, pipe F°G°, Q=2.45 L/s, Re= 5.4 x 104. The efficiency of the motor will be 0.7, NPSHr = 3mca, the system has an average altitude of 3341 msnm, it is also known that the suction height is 0.80m. Suction pipe diameter 1 ¼”.
You are evaluating a pipe network transporting water from a large river reservoir to the citywater storage facility. According to the pipe specifications, the pressure leaving the pipe network(continuing to city storage) cannot exceed 3 psi. Given Qa, pipe diameters (Da – Dd), determinethe pressure exiting the pipe network. Do the city designers need to reconfigure the set-up. Usethe Hazen-Williams equation to determine the head losses. All pipe lengths are 200 feet long,and the pipes are made of recently installed galvanized iron. given below Flow rate and Diameter for all 4 pipes: Q_a=42 csf, D_a=4ft, D_b=3.2ft, D_c=7ft, D_d=2.1ft.