l3answer 4 5 6 d. 60N6. A certain switchboard needs a conversion from circularconductor to a rectangular conductor or bus bar, having thesame cross-sectional area. If the cross sectional area ofthe circular wire is 715,716 circular mils, calculate thewidth of an equivalent bus bar if the thicknes of the baris to be 4 inch.a. 2.128 inb. 2.428 inc. 2.218 ind. 2.248 in 4. A voltage of 200 V is applied to a tapped resistor of 500ohms. A tap is made to a circuit needing O.1 A at 25 V. Thetotal power consumed is nearlywatts.a. 83.5b. 92.6 Wс. 89.8 иd. 97.1 W5. A piece of silver wire has a resistance of 1n. What willbe the resistance of manganin wire of one-third the lengthand one-third the diameter if the specific resistance ofmanganin is 30 times that of silver?а. 300b. 1200c. 900

Answered: Image /qna-images/answer/afb21748-8266-438d-be78-4696aac1bc9e.jpg

d. 60n 6. A certain switchboard needs a conversion from circular conductor to a rectangular conductor or bus bar, having the same cross-sectional area. If the cross sectional area of the circular wire is 715,716 circular mils, calculate the width of an equivalent bus bar if the thickness of the bar is to be 4 inch. a. 2.128 in b. 2.428 in c. 2.218 in d. 2.248 in

d. 60n 6. A certain switchboard needs a conversion from circular conductor to a rectangular conductor or bus bar, having the same cross-sectional area. If the cross sectional area of the circular wire is 715,716 circular mils, calculate the width of an equivalent bus bar if the thickness of the bar is to be 4 inch. a. 2.128 in b. 2.428 in c. 2.218 in d. 2.248 in

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

write only the option The electrical power is delivered to the users through five distribution levels. True or False? A.True B.False The average supply restoration for voltage level 11 kV is A.more than 4 hours B.between 1 and 4 hours C.less than 4 hours Tariff is the rate of charging for electrical energy supplied by the utility company to its consumer. Tariff is depends on various factors excpet: A.Type of facilities B.Type of services C.Type of consumers D.Total fixed running annual charges of the utility company Under primary distribution netwrok system, the electrical power is delivered to the users through _________ distribution levels. A.3 B.5 C.2 D.4
A friend brought a 960 W electric coffee maker from Europe, designed to work with a 240 V. power supply (a) What should it do to connect the appliance in a 120 V source? (b) What should be the current that the coffee maker consumes from a 120 V line? (c) What is the strength of the coffee maker? (The value of each voltage is a effective value.)
Consider the network given below, where I1 = 8 A and I2 = 7 A. Calculate the power absorbed by each element in the given network. The power absorbed by each element in the given network is given below. pcurrent source = W pelement with 15 volts across it = W pelement with +9 volts across it = W p6 volt source = W
The percent values of the voltage, current, impedance, and volt-amperes for a givenpower system are 90, 30, 80, and 150 percent, respectively. The base current and baseimpedance are 60A and 40Ω, respectively. Calculate the actual values of the voltage,current, impedance, and volt-amperes.
An AWG 0 aluminum transmission grid cable has a wire diameter of 8.25 mm and a cross-sectional area of 53.5 mm^2. The resistivity of aluminum is 2.5x10^-9 Ωm. The total cable length is 40 km. The system delivers 1 MW of DC power to the load. Determine the resistance of the cable.
A high-voltage transmission line with a resistance of .39ohms/km carries a current of 1030A. The lines delivering the power are at a potential of 770kV at the power station. These lines carry the current to a city located 175km from the station. What is the power loss due to resistance in the line? (1MW=1x10^6W) -.0087MW -72.4MW -.793MW -.070MW -4.8MW At the power plant, the electric potential between the power lines is 770kV. What will be the electric potential between the power lines when they reach the city? -770kV -0kV -700kV -70.3kV
Question 5 A natural gas plant with a 50MW operates at an average loading of 75% year round. How many kWh does the plant to supply to the grid? Question 6 For Question 5, the natural gas power plant costs $175,000,000 to build and costs $20M a year to operate. What is the average cost per kWh or MWh for the power produced if the estimated plant life is 20 years? Assume a discount rate of 5%.
a) Give five desirable characteristics of a tariff. b) Calculate annual bill of a customer whose maximum demand is100kw,p.f = 0.8 lagging and a loadfactor of 60%.The tariff used is Ksh.75per Kva of maximum demand plus 15 cts per kWh consumed.c) Explain the following methods of tariff;(i)Block rate(ii)Two-part tariffs d) A tariff in force is Ksh.50 per Kva of maximum demand per year plus 10 cts per kWh.A consumer has a maximum demand of 10 Kw with a load factor of 60% and a p.f of 0.8 lag. Show the effect of improving the load factor to 80% with the same maximum demand and p.f on the total cost per kWh. (
5) Consider the one-line diagram of the power system shown in Fig. 2. Equipment nameplate ratingsare:G1 : 750 MVA; 18 kV; x = 0:2 puG2 : 750 MVA; 18 kV; x = 0:2 puM : 1; 500 MVA; 20 kV; x = 0:2 puT1 : 750 MVA; 500Y=20Δ kV; x = 0:10 puT2 : 750 MVA; 500Y=20Δ kV; x = 0:10 puT3 : 750 MVA; 500Y=20Δ kV; x = 0:10 puT4 : 750 MVA; 500Y=20Δ kV; x = 0:10 puT5 : 1; 500 MVA; 500Y=20Y kV; x = 0:10 pu500 kV transmission lines have following reactances in OhmsXL45 = 40 Ω XL68 = XL78 = 25 Ω All per-unit reactance values are on the respective equipment rating (voltage and power) as the base. Determine the per-unit reactances on the system base and draw the equivalent reactance diagram. Use the base of 100 MVA and 500 kV for the 40 Ω line. Neglect Δ?Y transformer phase shift.
A 2-wire DC distributor AB of length 500 m is fed at both ends with equal voltage of 250 V. Loads of 50A, 60 A, 40 A and 30 A are tapped at distance of 100 m, 250 m, 350 m and 400 m from end A respectively.If the cross-section area of each conductor is 1 cm2 and the resistivity of the material of the conductor is 1·7 μΩcm, 1) Calculate the overall efficiency of the network
A barangay power station supplies 60kW to a load over 2,500ft, 100 mm², two conductors copper feeder. The resistance of which is 0.0078 ohm per 1,000 ft the bus bar voltage is maintained constant at 600V. determine the load current. Answer = 108 A
Prepare & Analyze the whole Power System of the country "Philippines" Provide a Detailed Data that Cover All the things Must add a References. You can use the Internet openly. Thank you