Determine the hydrostatic force acting on a vertical trapezoidal section whose upper base is flushed parallel to the liquid surface. The top base measures 2 m and the lower base is twice the length of its top. One of its remaining side is upright vertical while the other is inclined 45° with the horizontal. Calculate as well the location of its center of pressure.

Determine the hydrostatic force acting on a vertical trapezoidal section whose upper base is flushed parallel to the liquid surface. The top base measures 2 m and the lower base is twice the length of its top. One of its remaining side is upright vertical while the other is inclined 45° with the horizontal. Calculate as well the location of its center of pressure.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.100P: The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness...

See similar textbooks

Similar questions

The hemispherical glass bowl is filled with water. Find the location y of the center of gravity of the filled bowl. Approximate the bowl as a thin shell of radius R=6.15in. Use 1=162lb/ft3 for glass and 2=62.4lb/ft3 for water.
The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
A 6-in. diameter hole is drilled in the conical frustum. Calculate the volume and the surface area of the resulting body.
The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness and weighs 18000 lb when empty. Determine the depth of the water h for which the center of gravity G of the tank plus water will be located at the surface of the water. For water, use =62.4lb/ft3.
Calculate the resultant force caused by the water acting on the parabolic arch dam. The water levels are 16 ft on the upstream side and zero on the downstream side. For water, use =62.4lb/ft3.
A semicircular gate with a diameter of 6 ft is installed at 50º as shown below. The top of the gate is 5 ft below the water surface. Determine the resulting hydrostatic force and the location of the center of pressure on the gate.
The sides of a triangular area measure 2 m, 3 m, and 3 m respectively. Calculatethe force of water on one side of the area if the 2-m side is horizontal and 10 mbelow the surface and the triangle is on a 600-angle sloped upward. a) how far below the surface is the center of pressure of thehydrostatic force?
A cylindrical tank 2m diameter and 4 m long, with its axis horizontal, is half filled with water and half filled with oil of density 880 kg/m3. Determine the location of the hydrostatic force from the top of the cylinder. Express your answer in two decimal place and in terms of m.
A rectangular plate 3 m X 5 m is immersed vertically in water such that the 3 m side is parallel to the water surface. Determine the hydrostatic force and the centre of pressure if the top edge of the plate is a) Touching the water surface .b )2 m below the water surface
right cylindrical object has a diameter of 1526 mm and a height of 2.1m. The density of water is 1000 kg/m3. If the right cylindrical object is placed in the water, what is the buoyant force?
3.Determine the total pressure on a circular plate of diameter 1.5m which is placed vertically in water in such a way that the centre of the plate is 3m below the free surface of water. Find the position of centre of pressure also.
A trapezoidal plate measuring 2m at top edge and 3m at the bottom edge is immersed in water with the plan making an angle of 30 0 to the free surface of water. The top and the bottom edges lie at 1m and 2m respectively from the surface. Determine the hydrostatic force on the plate