Determine the steam condition for the steam properties on the table below. Write: SHV if it is a superheated vapor SCL if it is a subcooled or compressed liquid Sv if it is a saturated vapor SL if it is a saturated liquid SM if it is a saturated mixture Draw the corresponding T-s and p-v diagrams to determine the steam condition. STEAM PROPERTIES 1. 15 MPa and 200°C 2. 3 MPa and v = 1.32 m/kg STEAM CONDITION 3. 100 kPa and x = 90% 4. 30 MPa and s = 5.3500 kJ/kg-K 5. T= 300°C and s = 2.8000 kJ/kg-K

Determine the steam condition for the steam properties on the table below. Write: SHV if it is a superheated vapor SCL if it is a subcooled or compressed liquid Sv if it is a saturated vapor SL if it is a saturated liquid SM if it is a saturated mixture Draw the corresponding T-s and p-v diagrams to determine the steam condition. STEAM PROPERTIES 1. 15 MPa and 200°C 2. 3 MPa and v = 1.32 m/kg STEAM CONDITION 3. 100 kPa and x = 90% 4. 30 MPa and s = 5.3500 kJ/kg-K 5. T= 300°C and s = 2.8000 kJ/kg-K

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter1: Heat, Temperature, And Pressure

Section: Chapter Questions

Problem 6RQ: One British thermal unit will raise the temperature of _____ 1b of water _____F.

See similar textbooks

Similar questions

Helium gas initially has a volume of 50 liters, a pressure of 2 x 10⁵ N/m², and a temperature of 300 K. Then the gas undergoes a process at constant temperature until the volume increases to 100 liters. If In 2 = 0.693; specify: a. pressure after the volume increases
We have a closed system containing water at a pressure of 0.2 bar. The specific volume is 924.278 cm3/g. For this vapor-liquid mixture, report the fraction of vapor. Use the steam tables and report your answer to three decimal places.
A cylindrical vessel with a diameter of 8 inches and 5 feet long contained acetylene at 300 psi gauge and 82°F. After some amount of acetylene was used, the pressure was reduced to 190 psi gauge and the temperature was 74°F. The gas constant of acetylene is 59.35 ft-lbf/lbm-°R. Determine the following: What is the initial mass in lbm of the acetylene inside the vessel What proportion in percentage of acetylene was used? What volume in ft3 would the used acetylene occupy at 30 psig and 80°F?
1. Argon is initially at 300 K with a specific volume of 0.3 m3/kg. It is then isentropically expanded to a specific volume of 0.6 m3/kg. Determine the final temperature, in K, up to two decimal places using rounding. Assume that specific heats are constant. 2. Neon is expanded isentropically from 2000 kPa and 770 K until the temperature drops to 275 K. What is the pressure, in kPa, at the final state? Report your answer to one decimal place using rounding. Assume that specific heats are constant. 3. Air at 2000 K with a specific volume of 0.6 m3/kg is expanded isentropically until the temperature drops to 1000 K. Determine the final specific volume, in m3/kg. Assume that specific heats vary with temperature. Report your result to two decimal places using rounding. 4. Air initially at 300 K and 100 kPa is isentropically compressed to a pressure of 4 MPa. Determine the final temperature, in K, assuming that specific heats vary with temperature. Report your result to one decimal place…
A piston-cylinder assembly contains a mystery substance that undergoes a series of processes. Process 1-->2: Constant pressure process at 5bar from v1=.07m3/kg to v2=.12m3/kg Process 2-->3: Constant volume process to saturated vapor Process 3-->4: Constant temperature process to quality of 50% Process 4-->5: Constant volume process to 5bar Sketch the processes on Pt, Pv, and Tv, plots. Lable the axes including property values; use closed dots to show the states, use solid lines to connect the states, add number and arrows to make clear the states numbers and process directions. Could this be considered a thermodynamic cycle? Why or why not?
***Please show your correct and complete solution for this problem. Box your final answers and express in two decimal places. Sketch the schematic diagram.*** A rigid tank initially contains 5kg of saturated vapor steam at 150°C. Heat transfer is done until the pressure of steam reaches 1.20 MPa. Sketch the P-v diagram. Solve for the change in enthalpy and heat transferred.
The fluid is heated from 125 degrees Fahrenheit to 225 degrees Fahrenheit. Consider an ideal gas with the following characteristics: R = 85 ft-lbf/lbm-R Cp = 0.35 + 0.000325T BTU/lbm-R If the heating is at constant pressure, (e) the value of k at 160 degrees Celsius. If the fluid undergoes an isentropic process, determine (f) non-flow work and (g) steady-flow work. (For item f and g, use the value of k at 160 degrees Celsius).
Gas at 70 bars gage pressure and 37.8°C is contained in a 12,900-cm3 cylinder. A piston compresses the volume to 9680 cm3 while the gas is heated to 93.3°C. What is the final pressure in the cylinder in bars?
A child takes a helium balloon on a plane from Denver (with an air pressure of 0.83 atm) on a cool day when the temperature is 20.0oC to Boston (at sea level, with an air pressure of 1.0 atm) where the temperature is 5.0oC. Assume that no gas escapes from the balloon during the flight. What is the volume of the balloon in Boston, relative to its size in Denver? Group of answer choices The volume in Boston is 0.79 times the volume in Denver. The volume in Boston is 0.20 times the volume in Denver. The volume in Boston is 0.87 times the volume in Denver The volume in Boston is 1.3 times the volume in Denver. The volume in Boston is the same as the volume in Denver.
Water at 210°C is heated, which increases the internal energy of the water by 1000 kJ/kg. Initially the quality of the system is 0.9. What is the final temperature, in °C, if the final pressure is 1.8 MPa? Report your answer to one decimal place.
The diagram presented represents a thermodynamic process experienced by 27.5mmol (millimoles) of a monatomic ideal gas. The volume axis is divided into equal increments υ0=777cm3 while the pressure axis is divided into equal increments p0=0.301atm. Part (a) How much work, in joules, does the gas perform on its environment during the thermodynamic process represented in the diagram? Part (b) What is the change, in joules, of the internal energy of the gas during the process represented in the diagram? Part (c) How much heat, in joules, is absorbed by the gas during the process represented in the diagram?
Five kilograms of water at 35 degrees Celsius are placed in a piston under 5.335MPa (State 1). Heat is added to the water at constant pressure until the piston reaches a stop at a total volume of 0.035 m3 (State 2). Most heat is added at constant volume until the temperature of water reaches 322 degrees Celsius (State 3). Determine (a) the quality of fluid and the mass of the vapor at State 2, and (b) the pressure of the fluid at State 3.