Problem 2: There is a piston cylinder device that contains 0.03 kg of saturated liquid water. The water or H:0 is heated to a final temperature of 300 °C. The piston has a mass of 10.0586 kg and a cross sectional area of 0.001m. The atmospheric pressure is 101.325 kPa. The piston can move upward as water is heated. a) Determine the pressure inside the cylinder by applying Newton's law in vertical direction b) What is the initial temperature of the water if the pressure inside the piston cylinder device is 200 kPa? c) Determine the amount of heat transfer required for the process m-5kg Water

Problem 2: There is a piston cylinder device that contains 0.03 kg of saturated liquid water. The water or H:0 is heated to a final temperature of 300 °C. The piston has a mass of 10.0586 kg and a cross sectional area of 0.001m. The atmospheric pressure is 101.325 kPa. The piston can move upward as water is heated. a) Determine the pressure inside the cylinder by applying Newton's law in vertical direction b) What is the initial temperature of the water if the pressure inside the piston cylinder device is 200 kPa? c) Determine the amount of heat transfer required for the process m-5kg Water

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter1: Heat, Temperature, And Pressure

Section: Chapter Questions

Problem 6RQ: One British thermal unit will raise the temperature of _____ 1b of water _____F.

See similar textbooks

Similar questions

One British thermal unit will raise the temperature of _____ 1b of water _____F.
A town has a 1.4-million-gallon storage capacity water tower. If the density of water is 62.4 lb/ft3 and local acceleration of gravity is 32.1 ft/s2, what is the force, in lbf, the structural base must provide to support the water in the tower?
An atmospheric pressure of 101.325 kPa will be supported by how much height of the water? a. 10.32 m b. 15.42 m c. 13.23 m d. 15.45 m
A piston-cylinder contains 2 lbm of water. The initial volume is 0.1 ft3. The piston rises, causing the volume to double. Determine the final specific volume of the water.
Q1/ An engine cylinder has a piston of area 0.12 m3 and contains gas at a pressure of 2.5 MPa. The gas expands according to a process which is represented by a straight line on a pressure- volume diagram. The final pressure is O.5 MPa. Calculate the work done by the gas on the piston in KJ if the stroke is 0.20 m. *
A change in temperature of 50o C is equal to a change of ___.
A piston-cylinder arrangement contains water at 112°C, 84% quality with a volume of 0.98 L. What is the initial mass, in grams? The system is then heated, causing the 150-mm-diameter piston to rise and encounter a linear spring with k = 800 kN/m. Calculate the specific internal energy (kJ/kg) at this instant knowing that the measured volume is 1.65 L. The heating continues and compresses the spring in the process. When the piston encounters the stops, the pressure is 200 kPa. What is the temperature (in °C) and entropy (in J/K) at this point? Heating then continues until the pressure reaches 300 kPa. What is the volume, in L, at this instant? Illustrate the complete process in separate P-v and T-v diagrams.
The pressure 10 ft below the free surface of a liquid is 6.51 inHg. What is the specific gravity of the liquid?
A piston-cylinder arrangement contains water at 110°C, 85% quality with a volume of 1 L. What is the initial mass, in grams? The system is heated, causing the 150-mm-diameter piston to rise and encounter a linear spring with k = 800 kN/m. Calculate the specific internal energy (kJ/kg) at this instant knowing that the measured volume is 1.65 L. The heating continues and compresses the spring in the process. When the piston encounters the stops, the pressure is 200 kPa. What is the temperature (in °C) and entropy (in J/K) at this point? Heating continues until the pressure reached 300 kPa. What is the volume, in L at this instant? Illustrate the process in separate P-v and T-v diagram. Note:1000 L = 1m3. Hint: Draw the FBD of the piston in each state.
Volume of the rigid tank is always ..... its specific volume A)Equal to B)Greater than C)None of these D)Less than
A cubic meter of a liquid has a weight of 9800 N at a location where g = 9.79 m/s2. What is its weight at a location where g = 9.83 m/s2? * A)9780 N B)9820 N C)9800 N D)9840 N
A cylindrical drum (2 ft. diameter, 3 ft. height) is filled with a fluid whose density is 40 lb/ft^3 . Determine the (a) the specific volume in m^3/kg ; (b) the specific weight in poundal/in^3 ; (c) the total mass in slugs ; and (d) the total volume of fluid in gallons. Local g = 31.90 fps^2.