dozm over Q1/ Design a square footing carrys an interior column with dimension (400*400mm), the column carrys a dead load of (1020kN), and alive load of (710kN), the allowable soil pressure is (270Mpa), 1 = 25Mpa, f = 400Mpa , Ysoii=19 kN/m3. Using b = 25mm for steel reinforcement, and footing 75 mm, ------. :.. اله سامه ۸۹۰ اسل لولوم

dozm over Q1/ Design a square footing carrys an interior column with dimension (400*400mm), the column carrys a dead load of (1020kN), and alive load of (710kN), the allowable soil pressure is (270Mpa), 1 = 25Mpa, f = 400Mpa , Ysoii=19 kN/m3. Using b = 25mm for steel reinforcement, and footing 75 mm, ------. :.. اله سامه ۸۹۰ اسل لولوم

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter17: Settlement Of Shallow Foundations

Section: Chapter Questions

Problem 17.10P

See similar textbooks

Similar questions

Q/ for the circular footing 5m diameter . find the thickness of footing if (factor of safety = 3) . salty sand . Ƴsaturated = 19 kN/m3 C = 10 kN/m2 ƴd = 15 kN/m3
A circular footing having a diameter of 1.2 m. has its bottom at a depth of 2.6 m. from the ground surface. The water table is located at a depth of 1.2 m. below the ground. The soil has the following properties: γd = 18.26 kN/m3, γsat = 19.10 kN/m3, c = 15.18 kPa, Nc = 35.06, Nq = 22.03, Nγ = 19.01. Determine the allowable load, in kN, that the footing can carry using factor of safety of 2.7
A 460 mm reinforced concrete interior spiral column carries service loads of 1025 kN dead load and 715 kN live load (Figure 3). The column rest on a square spread footing 2.75 m x 2.75 m in dimension. The net ultimate soil pressure at the base of the footing is 314 kPa, f’c =21 MPa, fy = 345 MPa, clear cover is 75 mm and 25 mm-diameter bars, the allowable soil pressure is 250 kPa? Unit weight of soil is 17kN/m3 ; unit weight of concrete is 23.5 kN/m3. The underside of footing is 1.50m below the natural grade line
A rectangular footing (base = 1.76 m., length = 5.83 m.) has its bottom 3.06 m. below the ground surface. Unit weight of soil is 19.07 kn/m3, unconfined compressive strength = 156 kPa. Use angle of internal friction = 10° (Nc = 9, Nq = 2.5, = 1.2). Compute the allowable load that the footing could carry. Use FS = 2.8. Round off to the nearest whole number.
A4-ft-wide long footing is located at the top of a slope whose inclination is 30°. The soil of the hill is sand with an assumed angle of internal friction of 30°. If the D/B ratio is 1 and the b/B ratio is also 1, what loading can be imposed on the footing per foot of length? Use a factor of safety of 3.
A square footing 2m x 2m carries a uniformly distributed load of 314 kN/m². find theintensity of vertical pressure at a depth of 6 m below a point 0.5 m inside each of the twoadjacent side of footing.
A square footing which carries an axial load of 13000 kg has its bottom resting on a ground water table at a depth of 2.5 m from the ground surface. Nc = 35, Nq = 22, Nγ = 19. Take PDRY = 1910 kg/m3 and PSAT = 1600 kg/m3, c = 1800 kg/m2. Compute the net soil pressure.
A rectangular footing (base = 5.16 m., length = 1.77 m.) has its bottom 3.59 m. below the ground surface. Unit weight of soil is 18.81 kn/m3, unconfined compressive strength = 177 kPa. Use angle of internal friction = 10° (Nc = 9.8, Nq = 5.4, = 2.3).
A square footing 2 m x 2 m is located at a depth of 1.2 m below the ground surface. The soilproperties are cohesion, c = 10 kPa, φ = 15 degrees, γ = 16.7 kN/m3, and γsat = 20 kN/m3.Use Terzhagi’s bearing capacity equation: ?? = 1.3??? + ????? + 0.4????, bearingcapacity factors Nc = 12.9, Nq = 4.4, Nγ = 2.5, find qu under the following conditions:
A square footing 2 m x 2 m is located at a depth of 1.2 m below the ground surface. The soil properties are cohesion, c = 10 kPa, φ = 15 degrees, γ = 16.7 kN/m3 , and γsat = 20 kN/m3 . Use Terzhagi’s bearing capacity equation: ?? = 1.3??? + ????? + 0.4????, bearing capacity factors Nc = 12.9, Nq = 4.4, Nγ = 2.5, find qu under the following conditions: a. When the water table is way below the bottom of the footing b. When the water table is at the bottom of the footing c. When the water table is at ground surface
A 1.80m x 1.20m x 0.4m footing with a column at the center is loaded with a column at the center is loaded with a column load of 750 kN and a moment of 290 kN-m acting about the transverse axis of the footing base. The base of the footing is 1.25m below the ground. Use the unit weight of 24 kN/m^3 for concrete and 18 kN/m^3 for the soil above the footing.Determine the equivalent eccentricity of the load,mm?Maximum net soil pressure under the footing, kPa?Required minimum additional axial load so that the whole footing base is under pressure,kN?
A rectangular footing 3m x 2m exerts a pressure of 100kN/m2on a cohesive soil Es= 5x104 kN/m2and µ = 0.5. Estimate the immediatesettlement at the centre, assuming(a) the footing is flexible (b) the footing is rigid (ii) Write about influence of water table in determination of bearing capacity.