Electromechanical energy conversion Measured in the idle running test of a three-phase star-connected asynchronous motor data: 300 V / 2.2A / 145 W. In the short circuit experiment, 60 V / 25 A / 680 W data was measured. L type equivalent circuit for the case where the slip is 3% Find the current (I'2) passing through the load resistance that changes due to slippage. and obtain the electrical equivalent circuit of the motor in this case. By obtaining the values of all circuit elements properly and overwriting the circuit elements, L type electrical Draw the equivalent circuit. Your calculations and drawings

Electromechanical energy conversion Measured in the idle running test of a three-phase star-connected asynchronous motor data: 300 V / 2.2A / 145 W. In the short circuit experiment, 60 V / 25 A / 680 W data was measured. L type equivalent circuit for the case where the slip is 3% Find the current (I'2) passing through the load resistance that changes due to slippage. and obtain the electrical equivalent circuit of the motor in this case. By obtaining the values of all circuit elements properly and overwriting the circuit elements, L type electrical Draw the equivalent circuit. Your calculations and drawings

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.19P

See similar textbooks

Similar questions

Fill in the data for a 16-ampere electric motor, single-phase, no Code letters. a. Branch-circuit protection, non-time-delay fuses: Normal size _____________AMaximum size _____________A Switch size _____________ASwitch size _____________A b. Branch-circuit protection dual-element, time-delay fuses: Normal size _____________AMaximum size _____________A Switch size _____________ASwitch size _____________A c. Branch-circuit protection instant-trip breaker: Normal setting _____________A Maximum setting _____________A d. Branch-circuit protectioninverse time breaker: Normal rating _____________A Maximum rating _____________A e. Branch-circuit conductor size, Type THHN Ampacity _____________A f. Motor overload protection using dual-element time-delay fuses: Maximum size _____________A
An industrial plant consisting primarily of induction motor loads absorbs 500 kW at 0.6 power factor lagging. (a) Compute the required kVA rating of a shunt capacitor to improve the power factor to 0.9 lagging. (b) Calculate the resulting power factor if a synchronous motor rated at 500 hp with 90 efficiency operating at rated load and at unity power factor is added to the plant instead of the capacitor. Assume constant voltage (1hp=0.746kW).
The data obtained in the idling test performed on a three-phase star-connected asynchronous motor; It is 1200V, 5500W, 9.5A. The data obtained in the short circuit experiment on the same motor is 250V,It is 14500W and 100A. For the case where the slip of the motor is 5%, create the approximate equivalent circuit of the motor (L type equivalent circuit), draw the equivalent circuit, find the values of the circuit elements and MUST AND MUST write them ON THE EQUIVALENT CIRCUIT. R and X values will be used in circuit elements, not Z.
A 6-phase ∆-connected 1600 V (line-to-line), 150 kW, 50 Hz, six-pole induction driveis used in an electric car. The drive has the following parameter values in Ω/phasereferred to the stator:R1 =0.334 Ω R2 =0.168 Ω Rm1 = 125 ΩX1 = 0.273 Ω X2 = 0.287 Ω Xm1 = 16.78 ΩThe total friction, windage, and core losses may be assumed to be constant at Prot =773 W, independent of load. For a slip value of s=0.015: b ) Compute the speed, output torque, power and stator current d) Calculate the efficiency when the motor is operated at rated voltage andfrequency. answer：b) n= 985 rpm; Torque T= 1.18 x104 Nm; Power= 1.22 x106 W; Stator current I = 175.72 /32.79° (d) Efficiency = 86.4%
A long shunt generator delivers 25kW at 220V. The shunt, series and armature resistances are 500, 0.020, and 0.050 respectively, calculate the generated
A 6-phase ∆-connected 1600 V (line-to-line), 150 kW, 50 Hz, six-pole induction drive is used in an electric car. The drive has the following parameter values in Ω/phase referred to the stator: R1 =0.334 Ω R2 =0.168 Ω Rm1 = 125 Ω X1 = 0.273 Ω X2 = 0.287 Ω Xm1 = 16.78 Ω The total friction, windage, and core losses may be assumed to be constant at Prot =773 W, independent of load. For a slip value of s=0.015: a) Draw the equivalent circuitb) Compute the speed, output torque, power and stator currentc)Determine the power factor and whether leading or lagging d)Calculate the efficiency when the motor is operated at rated voltage and frequency.
Picture Single phase equivalent examples of a 3-phase star connected induction motor are given below. Total mechanical losses and negligence losses. Rated Power 4kW Rated voltage 380 Vrms line (220Vrms phase-neutral voltage) Rated frequency 50Hz Number of poles 4 r1= 1.5 Ω, x1 = 1.5jΩ, r2= 0.55Ω, x2 = 1.25jΩ, xm= 14jΩ, rc= ∞ This motor slippage is measured at 3% (s = 0.03) when loaded with a load below the rated point.
A single-phase alternator connected to 6,600-V bus-bars has a synchronous impedance of 10Ω and a resistance of 1 Ω. If its excitation is such that on open circuit the p.d. would be 5000 V, calculate the maximum load the machine can supply to the external circuit before dropping out of step and the corresponding armature current and p.f. [2864 kW, 787 A, 0.551]
4. Two shunt generators operating in parallel have each an armature resistance of 0.02 . The combined external load current is 2500 A. If the generated e.m.fs. of the machines are 560 V and 550 V respectively, calculate the bus-bar voltage and output in kW of each machine. Subject: Electrical Machine 1
Measured in the idle test of a three-phase star-connected induction motordata: 300 V / 2.2A / 145 W. In the short circuit test, 60 V / 25 A /680 W data measured. L type equivalent circuit for case where slip is 3%Find the current ( I2) flowing through the load resistor that varies due to shear.and obtain the electrical equivalent circuit of the motor in this state. Whole circuitto obtain the values of the elements properly andDraw the L-type electrical equivalent circuit by writing on the elementsMake your calculations and drawings legible. You find
A Turgo type hydro-electric plant uses a 92% efficiency generator to produce its rated output of 32.5 MW. It was observed during its operation that the mechanical loss is 4.25 MW. Also, from the penstock down to the turbine, 14.3% hydraulic head loss and 8.9% leakage loss occurs which are equally distributed and based on the parameters at the dam. The average elevation from the headrace to the jet centerline is 40 m and from the tailrace to the jet centerline is 4.5 m. compute the following: a. Power by the turbine, kW b. Volume flow rate at the source, m3/s c. Power by the jet, kW d. Mechanical Efficiency, %
A 3Ø, Y-connected alternator is rated at 1,600KVA, 13.5KV. The armature effective AC resistance per phase is 1.5Ω. The percentage regulation for a load of 1,280kW at unity power factor is 3.5%. Determine:(a) synchronous reactance of the alternator(b) %VR at full-load 0.8pf leading(c) What is the effect on %VR value if taken at half-load lagging pf? Justify andexplain briefly your answer on one(1) sentence.