Figure 2(a) shows a crate with a mass of 55 kg is projected down with an inclinationangle 8. If the initial speed of the crate is 7 m/s, investigate the time i required for thecrate to come to rest the distance travelx travel if 8 = 15°.m= 55 kgHk = 0.4Figure 2(a) A crate sliding down

Name: Figure 2(a) shows a crate with a mass of 55 kg is projected down with
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Figure 2(a) shows a crate with a mass of 55 kg is projected down with an inclinationangle 8. If the initial speed of the crate is 7 m/s, investigate the time i required for thecrate to come to rest the distance travelx travel if 8 = 15°.m= 55 kgHk =

Given data: The mass of the crate is m=55 kg The initial speed of the crate is u=7 ms The…

Engineering

Mechanical Engineering

Figure 2(a) shows a crate with a mass of 55 kg is projected down with an inclination angle 0. If the initial speed of the crate is 7 m/s, investigate the time t required for the crate to come to rest the distance travel x travel if 6 = 15°. m= 55 kg Hk = 0.4

Figure 2(a) shows a crate with a mass of 55 kg is projected down with an inclination angle 0. If the initial speed of the crate is 7 m/s, investigate the time t required for the crate to come to rest the distance travel x travel if 6 = 15°. m= 55 kg Hk = 0.4

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Please answer this NEATLY, COMPLETELY, and CORRECTLY for an UPVOTE. The wooden block (mass m = 0.5358 kg) is released from rest at A by a compressed spring (compressed length 0.6 m, undeformed length 1 m, spring constant k = 150 N/m). The block is allowed to slide through the rough horizontal surface (A to B), then along the smooth circular ramp (B to C, central angle θ = 47.2°, until the block is released after point C. Calculate the speed of the block at points B and C. Also, what is the magnitude of the normal force exerted to the block just before the block leaves the ramp? Neglect the geometry of the block. NOTE: Use Work-Energy Method to solve for the speeds; use Force-Mass-Acceleration (FMA) Method to compute for the normal force.
A highway curve with a radius of 120 m is banked so thatthere is no lateral pressure on the wheels of a car at aspeed of 48 kph. A car weighing 17.8 kN with 1.5-mdistance between its wheels and height h = 0.70 m travelsaround the curve at 96 kph. (a) What is the normal forceon the car’s outer wheels? (b) If friction is great enough toprevent skidding, at what speed would overturningimpend?
The super-container vessel has a total mass displacement of 23000 long tons. This vessel towed by a tugboat with α=20⁰ angle with horizontal. If a constant tension is applied as F=320 kN by the tugboat, please calculate the time to bring the vessel to a speed of 2 knot from the rest. At these low speeds, please neglect the hull resistance that created by the motion. Note: (1 long tons = 1016.05 kg, 1 knot=1.151 mi/hr= 0.5144 m/s)
A wheel tractor has a 200HP engine.If the weight of the wheel tractor is 30 tons and the weight on the drivingwheels is 50% of this weight, and it is operating at an altitute of 1000m above sea level, at an average temperature of 25 degree celcius, and at an average speed of 12km/hr. What is the maximum available rimpull if thecoefficient of traction is 0.25?. Take rimpull efficiency as 85%
Block A with a weight of 100N (mA=10kg) moves to the right (vA=1 m/s) at the moment shown in the figure. Since the kinetic friction coefficient between the surface and block A is μk=0.2, find the speed of block B when it moves 2 meters its weight is 200N (mB=20kg)
A uniform crate C with mass m is being transported to the left by a forklift with a constant speed v1 . What is the magnitude of the angular momentum of the crate about point A , that is, the upper left corner of the crate?a. 0b. mv 1dc. 3mv1d. mv 1
3 kg mass (green block) slides along the rod at a speed of 1.5m/s. Calculate the force of the impact at the other end when the green mass impacts the endcap. Length of rod is 300 mmMass of green block is 3 kgDiameter of rod is 15 mmVelocity of green block is 1.5 m/s
Show the complete solution. Put notes on steps. The wooden block (mass m = 0.6165 kg) is released from rest at A by a compressed spring (compressed length 0.6 m, undeformed length 1 m, spring constant k = 150 N/m). The block is allowed to slide through the rough horizontal surface (A to B), then along the smooth circular ramp (B to C, central angle 0 = 45°, until the block is released after point C. Calculate the speed of the block at points B and C. Also, what is the magnitude of the normal force exerted to the block just before the block leaves the ramp? Neglect the geometry of the block.NOTE: Use Work-Energy Method to solve for the speeds; use Force-Mass-Acceleration (FMA) Method to compute for the normal force.
The figure depicts two pucks on a frictionless table. Puck 2 is four times as massive as puck 1. Starting from rest, the pucks are pushed by two equal forces. 1-Which pucks will have the grater kinetic energy upon reaching the finish line? 2- Which puck will reach the finish time first ?
A uniform crate C with mass m is being transported to the left by a forklift with a constant speed v1 . What is the magnitude of the angular momentum of the crate about point D , that is, the upper left corner of the crate?a. 0b. mv 1ac. mv 1 bd. mv 1
A weather balloon is floating at a constant height above Earth when it r eleases a pack of instruments. a. If the pack hits the ground with a downward velocity of -73.5 m/s, how far did the pack fall? b. Calculate the distance the ball has rolled at the end of 2.2 s.
the 75 n crate is released from rest in incline surface at time t=0. The coefficient of kinetic friction between the crate and the surface is 0.14. How fast the crate is moving at t=1.5s