Fill in the blanks: A refrigeration system operates on an ideal vapor compression using R-134a with an evaporator temperature of -30°C and a condenser exit temperature of 46°C and requires a 74.6 kW motor to drive the compressor. What is the capacity of the refrigerator in TOR? Use the properties of R-134a from refrigerants' table. TOR

Fill in the blanks: A refrigeration system operates on an ideal vapor compression using R-134a with an evaporator temperature of -30°C and a condenser exit temperature of 46°C and requires a 74.6 kW motor to drive the compressor. What is the capacity of the refrigerator in TOR? Use the properties of R-134a from refrigerants' table. TOR

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 2RQ: The operating condition for the single compressor in a household refrigerator is the lowest box...

See similar textbooks

Similar questions

Why is two-stage compression popular for extra-low-temperature refrigeration systems?
Condensers in these refrigerators are all_______cooled.
The operating condition for the single compressor in a household refrigerator is the lowest box temperature, which is typically A. 0F B. -20F C. 20F D. 40F
A refrigeration system with a capacity of 10 tons of refrigeration, operates at 210 kPa evaporator, while being condensed is 1240 kpa. If the refrigerator R-717 is saturated, calculate the theoretical power required to operate the compressor. compressor power =
A refrigeration system with a capacity of 10 tons of refrigeration operates at 210 kPa in the evaporator, while in the condenser it is 850 kPa. If R-134a refrigerant is in a saturated state, calculate the theoretical power required to operate the compressor. Compressor power = Answer kW.
A refrigeration system with a capacity of 10 tons of refrigeration, operates at 210 kPa in the evaporator, while in the condenser it is 850 kPa. If R-134a refrigerant is in a saturated state, calculate the theoretical power required to operate the compressor. Compressor power = ... W.
A refrigeration system using R-12 receives a load of 54 KW at an evaporator temperature of - 4 oC and a condenser temperature of 42 oC.Determine:a. Calculate the power required by the compressor in KW. b. If a liquid to suction heat exchanger is to be installed henceforth superheating the vapor refrigerant by 10 oC upon entering the compressor, what is the COP?
A refrigeration system with a capacity of 15 tons of refrigeration, operates at 150 kPa in the evaporator, while in the condenser it is 1000 kPa. If R-134a refrigerant is in a saturated state, calculate the theoretical power required to operate the compressor. Compressor Power
Calculate the COP of an R-134a driven fully reversible refrigerator for an evaporator temperature of 8.91°C and a condenser pressure of 35.51°C.
A refrigeration system operates on an ideal vapor compression using R-12 with an evaporator temperature of -30 C and a condenser exit temperature of 49.30C and requires 74.6 kW motor to drive the compressor. What is the capacity of the refrigerator in tons of refrigeration? Enthalpy at the condenser ,entrance = 382KJ/Kg, exit = 248.15KJ/Kg, at evaporator entrance= 248.15kJ/kg, exit =338.14kJ/kg.
A two-evaporator, multiple EV,and single compression refrigeration system uses refrigerant-134a as the working fluid. The system operates evaporator 1 at 0°C, evaporator 2 at -26.4°C, and the condenser at 800kPa. The refrigerant is circulated through the compressor at a rate of 0.1kg/s and the low temperature evaporator serves a cooling load of 8 kW.Determine the cooling rate of the high-temperature evaporator, the power required by the compressor, and the COP of the system. The refrigerant is saturated liquid at the exit of the condenser and saturated vapor at the exit of each evaporator, and the compressor is isentropic.
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting waste heat to cooling water that enters the condenser at 20°C at a rate of 0.25 kg/s and leaves at 28°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the Talking PIYATIDA TENURUK compressor consumes 3.7 kW of power, determine (a) the mass flow rate of the refrigerant (b) the refrigeration load (c) the COP (d) the minimum power input to the compressor for the same refrigeration load