6/209 The nose-wheel assembly is raised by the applica- tion of a torque M to link BC through the shaft at B. The arm and wheel AO have a combined weight of 100 lb with center of mass at G, and a centroidal ra- dius of gyration of 14 in. If the angle 0 = 30°, deter- mine the torque M necessary to rotate link AO with a counterclockwise angular velocity of 10 deg/sec that is increasing at the rate of 5 deg/sec every second. Additionally, determine the total force sup- ported by the pin at A. The mass of links BC and CD may be neglected for this analysis. - 16": B 20" 32" 20" Prohlom f6/709

6/209 The nose-wheel assembly is raised by the applica- tion of a torque M to link BC through the shaft at B. The arm and wheel AO have a combined weight of 100 lb with center of mass at G, and a centroidal ra- dius of gyration of 14 in. If the angle 0 = 30°, deter- mine the torque M necessary to rotate link AO with a counterclockwise angular velocity of 10 deg/sec that is increasing at the rate of 5 deg/sec every second. Additionally, determine the total force sup- ported by the pin at A. The mass of links BC and CD may be neglected for this analysis. - 16": B 20" 32" 20" Prohlom f6/709

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

THE WEIGHT OF THE UNBALANCED WHEEL IS 200 KG AND IT HS A RADIUS OF GYRATION ABOUT ITS MASS CENTER, G, OF 0.3 METERS. AT THE INSTANT SHOWN IT IS ROTATING AT 6 RAD/SIN A CLOCKWISE DIRECTION. FIND THE FORCES BETWEEN AT THE PIVOT POINT C. Please include a Free Body Diagram
Each of the two links has a mass of 2 kg and a centroidal radius of gyration of 60mm. The slider at B has a mass of 3 kg and moves freely in the vertical guide. The springhas a stiffness of 6 kN/m. If a constant torque M = 20 N∙m is applied to link OA throughits shaft at O starting from the rest position at θ = 45°, determine the angular velocity ofOA when θ = 0.
A torque T = 0.30 N-m is applied to a bevel gear B. Bevel gear D meshes with gear B and drives pump A. Gear B has a radius of gyration of 150 mm and a weight of 50 N, whereas gear D and the im- peller of pump A have a combined radius of gy- ration of 50 mm and a weight of 100 N. Find how many revolutions of gear B are needed to get the pump up to 200 rpm from rest. What is the power output of the pump at this speed if it is 90% efficient.
) A, B, C and D are four masses carried by a rotating shaft at radii 100mm,125mm,200mm and 150mm respectively. The planes in which the masses revolve are spaced 600mm apart and the masses of B, C and D are 10kg,5kg and 4kgrespectively.Find the required mass A and relative angular setting of the four masses so that the shaft be in complete balance.
The uniform slender beam has a total mass of M and rotates freely at the indicated suspension point O. The horizontal beam section has a length of 2/3L and the vertical section has a length of 1/3L. The beam is released from the drawn position a) Draw the full-body diagram.b) Draw the kinematic diagram.c) determine the centre of gravity of the beamd) set up the necessary motion equationse) determine the angular acceleration of the beam (in g/L)f) determine the resulting force in the suspension point O. (leave the mg terms)
6/40 If the frictional moment at the pivot O is 2 N-m, de- termine the angular acceleration of the grooved drum, which has a mass of 8 kg and a radius of gyra- tion ko = 225 mm.
The turning-moment diagram for an engine consists of two isosceles triangles each with a height equivalent to a torque of 16kNm. The bases of the triangles lie between ? = 0 ? and ? = 180 , and ? = 180? and ? = 360? respectively. If the engine is to rotate with a mean speed of 130 rpm, calculate the following: the mass of the flywheel having a radius of gyration 1.1m to restrict the fluctuation of speed to +1.5% of the mean speed.
The connecting rod of a horizontal reciprocating engine is 400 mm and length of the stroke is 200mm. The mass of the reciprocating parts is 125 kg and that the connecting rod is 100 kg. The radius of gyration of the connecting rod about an axis through the centre of gravity is 120 mm and the distance of centre of gravity of the connecting rod from big end centre is 160 mm. The engine runs at750 r.p.m. Determine graphically the torque exerted on the crankshaft when the crank has turned 30° from the inner dead centre.
In the helicopter shown; a vertical tail propeller is used to pre- vent rotation of the cab as the speed of the main blades is changed. Assuming that the tail propeller is not operating determine the final angular velocity of the cab after the speed of the main blades has been changed from I80 to 240 rpm. (The speed of the main blades is measured relative to the cab, and the cab has a centroidal moment of inertia of 650 lb.ft.s2. Each of the four main blades is assumed to be a slender rod 14 ft weighing 55 lb.)
5kg plate, and 3 kg slender rod. FIND, the radius of gyration of the pendulum about an axis perpendicular to the screen and passing through the point G.
The 60-kg unbalanced wheel rolls without slipping on the horizontalplane. The radius of gyration of the wheel about its mass center G is 240 mm.Calculate the kinetic energy of the wheel in the position shown, where its angular velocity is ω=2 rad/s.
The circular disk of 145-mm radius has a mass of 38 kg with centroidal radius of gyration k bar = 25 mm and has a concentric circular groove of 55-mm radius cut into it. A steady force Tis applied at an angle theta to a cord wrapped around the groove as shown. If T = 40 N, theta = 0, mu_s = 0.11, and mu_k = 0.09, determine the angular acceleration a of the