For engineering point of view, the mechanical properties would allow to predictthe ability of a component or a structure to withstand the forces applied to it.TrueFalseMaybeNone of theseDuctility is the opposite of brittleness.TrueFalseMaybeNone of these In the conventional stress-strain diagram, strain hardening means that whilespecimen is elongating, its x-sectional area will decrease.TrueFalseMaybeNone of theseBrittle fracture propagates nearly perpendicular to the direction of appliedstress.TrueFalseMaybeNone of these

Answer 1: Mechanical property of any material is very important to determine the capacity of load…

For engineering point of view, the mechanical properties would allow to predict the ability of a component or a structure to withstand the forces applied to it. True False Maybe None of these Ductility is the opposite of brittleness. True False Maybe O None of these

For engineering point of view, the mechanical properties would allow to predict the ability of a component or a structure to withstand the forces applied to it. True False Maybe None of these Ductility is the opposite of brittleness. True False Maybe O None of these

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: Maximum Principal Stress Theory is not good for brittle materials. a) True b) False

A: Given statement - Maximum Principal Stress Theory is not good for brittle materials.

Q: Explain the different experimental methods that would relate stress with strain to determine the…

A: The stress - strain relationship exhibited by a material provides various insights on the behavior…

Q: reep is considered to be __________ deformation of the material. A) Elastic B) Ductile C) Plastic

A: To select the correct option.

Q: A ductile material will not yield at all, when it is subjected to external loading Select one: True…

A: if ductile material is subjected to external loading then after a certain pt. the material will…

Q: The Factor of safety is the ratio of yield stress to the permissible stress for Brittle Material…

A: Factor of safety: The factor of safety for Brittle material is defined as the ratio of the ultimate…

Q: The factor of safety for mechanical components that are subjected to fatigue loading should be based…

Q: The flow curve equation is used to correlate true stress and true strain in the plastic region of…

A: In mechanical forming Operation stress and strain relationship is σ=kϵn Where K is Coefficient of…

Q: Strain hardening is associated with hot working process. Select one: True False

Q: The property of a material due to which it breaks with little permanent distortion, is called…

A: Malleability is the property of the material to deform its shape under the influence of pressure.…

Q: Q2: Hooke's Law can be used in which region of the stress-strain diagram? Elastic Necking Inelastic…

Q: Identify the properties of the materials whose stress-strain diagrams are shown I. П. III. none of…

Q: Plastic deformation can only occur in case of torsional force. Select one: a. False

Q: Three identical fatigue specimen ( denoted A ,B and C ) are fabricated from none ferrous alloy .Each…

A: Given: Specimen max. stress(MPa) min. stress(MPa) A +450 -150 B +300 -300 C +500 -200

Q: The magnitude of the modulus of elasticity is a measure of the resistance to separation of adjacent…

A: Answers (1) T (2) F (3) T

Q: 25. Which one of the following types of stress strain relationship best describes the behavior of…

A: In engineering, when some amount of strain is applied on a material, the material undergoes…

Q: For Isotropic materials, the properties are same in all directions. Select one: .True .False

Q: Mechanical Engineering Statics of Rigid Bodie

Q: Which of the following statements about the uniaxial stress-strain behavior of polymers true (a) The…

A: Que: Which of the following statements about the uniaxial stress-strain behavior of polymers is true…

Q: 11) 1.Recrystallization is followed by decrease in ductility. Select one: True False

Q: Which is/are true of creep? Check the right answers a) creep is time dependent b) the units of…

Q: As temperature decreases a ductile material can become brittle - ductile-to- brittle transition…

A: Solution:

Q: A grain size of 10, according to ASTM, indicates that the metal or alloy has good resistance to…

Q: |- The ultimate tensile strength of metallic sample is equal to which of the following values? If…

A: Since you have asked multiple questions in a single request we would be answering only the first…

Q: Hardness is a very important thermal property that can be measured by the Vickers's hardness test…

A: Hardness is defined as the resistance to indentation. One of the methods used to measure hardness is…

Q: During a tensile test on a ductile material . عند اجراء تجربة الشد على معدن لدن مطيلي( قأن None of…

A: As per given question During a tensile test on a ductile material .

Q: Tension is the common test for determining the strength-deformation characteristics using a. bending…

A: Tension test or tensile test is done on an specimen to determine the ultimate tensile strength,…

Q: The resistance of a material to deflection is called

A: Answer (d) Rigidity is correct option.

Q: Check the incorrect statements. a) As the thickness of the specimen increases, the fracture…

Q: 10)Which of the following statement is true for plastic deformation? i. Plastic deformation is a…

A: Given :- Statement about plastic deformation Statement i:- Plastic deformation is a function of…

Q: نقطة واحدة .The strength constant (C) is increased with increasing of temperature True False The…

A: The strength constant C is increasing of temperature. True or False Note :- You are posting…

Q: Do the following features of the impact tests and specimens indicate brittle or ductile failure?…

A: The impact tests are performed to find the toughness of the material.

Q: Yield strength, ultimate tensile strength, linear coefficient of thermal expansion, modulus of…

A: 1) true 2) true 3) false 4) false

Q: Which of the following statements are true? Creep is time independent at a given temperature Creep…

Q: The property of breaking without much permanent distortion is Ductility. Select one: True False

A: The property of breaking without much permanent distortion is known as the brittleness and the…

Q: 11/. is very brittle in nature and weak in tension. a. Copper b. Steel c. Cast iron d. Both cast…

Q: The standard for testing of materials provides information about material testing and properties…

A: Let us discuss about standard for testing of matetial

Q: Brittle materials have less impact strength compared to ductile materials. Select one: True False

Q: What material properties can be directly found fro Poisson's Ratio Shear Modulus O Young's Modulus…

Q: A hook is loaded with a force acting downward. Study its deformation behavior in the image shown…

A: From the given figure it can be seen that the force acting vertically downward is acting along the…

Q: QUESTION 19 Which failure criterion can be applied to brittle materials? Select all applicable…

A: To select the correct option.

Q: Ductile materials have more impact strength compared to brittle materials. Select one: True False

A: Ductile materials have more impact strength compared to brittle materials:

Q: Brittle materials have more impact strength compared to ductile materials. Select one: O True O…

A: Impact quality is the capability of the fabric to resist a abruptly connected stack and is…

Q: Fatigue properties can be represented by Select one: a. Strain-Stress diagram b. S-N diagram O c.…

A: Fatigue properties can be represented by Select one: a. Strain-Stress diagram b. S-N diagram c. N-S…

Q: (b) A cylindrical rod made from an unknown metal is 350mm long and has a diameter of 10mm. The rod…

A: Soln :- it has given - Length of the rod (l) = 350 Diameter (d) = 10 mm ==> cross section area A=…

Q: - The ultimate tensile strength of metallic sample is equal to which of the following values? If…

Q: As temperature decreases a ductile material can become brittle - ductile-to- brittle transition…

A: the given statement is true.

Q: Young's modulus is a very important mechanical property that can be directly measured by Vickers's…

A: Dear student, According to the guidelines I am allowed to answer only one…

Concept explainers

Thermal Properties of Materials

In mechanical engineering, the thermal property is represented as the physical quantity that is relevant to the application of heat. The thermal properties are evaluated by variations in any specific material due to low heat or high heat. The quantities that influence the thermal property of the materials are mass, density, temperature, and many others.

Question

For engineering point of view, the mechanical properties would allow to predict
the ability of a component or a structure to withstand the forces applied to it.
True
False
Maybe
None of these
Ductility is the opposite of brittleness.
True
False
Maybe
None of these

In the conventional stress-strain diagram, strain hardening means that while
specimen is elongating, its x-sectional area will decrease.
True
False
Maybe
None of these
Brittle fracture propagates nearly perpendicular to the direction of applied
stress.
True
False
Maybe
None of these

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Types of Properties of Engineering Materials

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

1. Explain what is meant by the term fast fracture, stating its causes, and give two examples from which it might occur. 2. Briefly describe, with the aid of a sketch in each case, the appearance of a fracture surface that has undergone (i) ductile tearing and (ii) cleavage.3. Explain, with the aid of a diagram, how a crack propagates by ductile tearing within the plastic zone of an engineering metal.4. Explain, with the aid of diagrams, how crack propagation is affected by the presence of the fibers in glass fibre reinforced resins.5. With the aid of a sketch, describe and explain the fracture surface characteristics of a metal component that has undergone fatigue failure. 6. By referring to graphical representations of fatigue test results, explain the terms S-N curve, Fatigue Limit and Endurance Limit. Please answer all parts
specimen of a 4340 steel alloy with a plane strain fracture toughness of 54.8 MPa√m is exposed to a stress of 1030 MPa. Will this specimen experience fracture if it is known that the largest surface crack is 0.5 mm long? Why or why not? Assume that the parameter Y has a value of 1.0.
Some aircraft component is fabricated from an aluminium alloy that has a plane strain fracture toughness of 40 MPa√m. It has been determined that fracture results at a stress of 300 MPa when the maximum (or critical) internal crack length is 4.0 mm. For this same component and alloy, will fracture occur at a stress level of 260 MPa when the maximum crack is 6.0 mm? Why or why not?
. Suppose that a wing component on an aircraft is fabricated from analuminum alloy that has a plane strain fracture toughness of 40 MPa√m. It has been determined that fracture results at a stress of 365MPa when the maximum internal crack length is 2.6 mm. For thissame component and alloy, compute the stress level at whichfracture will occur for a critical internal crack length of 4.0 mm.
Some aircraft component is fabricated from an aluminium alloy that has a plane strain fracture toughness of 35 MPa√m. It has been determined that fracture results at a stress of 250 MPa when the maximum (or critical) internal crack length is 2.0 mm. For this same component and alloy, show that whether fracture will or will not occur if the stress level is at 325 MPa and the maximum internal crack length is 1.0 mm.
A specimen of a 4340 steel alloy having a plane strain fracture toughness of 25 MPa√m is exposed to a stress of 500 MPa. -Will this specimen experience fracture if it is known that the largest surface crack is 0.5 mm? Please explain why. Assume the parameter Y has a value of 1.0.
An aircraft component is fabricated from an aluminium alloy, which has a plane strain fracture toughness of 50 MPam^1/2. It has been determined that fracture results at a stressof 350 MPa when the maximum internal crack length is 5 mm. For the same component , will the fracture occur at a stress level of 260 MPa when the internal crack length is 7 mm. State reason for your answer by putting in relevant calculated values
A steel rod specimen with a diameter of 200mm was subjected to a force 5000 N in the stress-strain experiment, if the area of the rod at fracture was 25434 mm^2, determine the percentage of the sample ductility (RA).
Why is the prediction of the tensile fracture of a brittle material is difficult to predict?
An 8-cm-square bar of steel is found to contain a1-mm corner crack, oriented perpendicular to the length ofthe bar. If an axial stress is applied from 0 to 420 MPa at afrequency of once every 10 minutes, how long will it take forthe rod to fracture? The properties of the bar are:KIC = 90 MPa √m , σys = 1500 MPa, and the crack growthrelation is da/dN = 2 x 10-37 ΔK4, with da/dN and ΔKbeing given in units of m/cycle and Pa √m , respectively
A component for an airerafl is made from an alyminum alloy that has a plane strain fracture toughness of 40 MPa mba. It has been determined thatfracture results at a stress of 365 MPa when the masimum internal crack length is 2.6 mm. For this component and alloy. compuie the stress leyel atwhich facture will occur for a crrical jnternal crack length of 4.0 mm
Estimate the theoretical fracture strength of a brittle material if it is known that fracture occurs by the propagation of an elliptically shaped surface crack of length 0.20 mm and that has a tip radius of curvature of 0.001 mm when a stress of 1450 MPa is applied. The question is attached. The answer is not 29000. WileyPlus marks it as incorrect.