For the mechanism shown on the right, link 2 has A a mass of 35 kg, polar mass moment of inertia about its CoM of 6.14 kg.m. Assume link 2 rotates at the angular acceleration of 400 rad/S²CW and the linear acceleration of 5000 m/s at 180. The CoM of link 2 is located at 500 mm from point A. Determine the force CoM 1300 Frequired to create this instantaneous motion. Both blocks are considered massless. 60°

For the mechanism shown on the right, link 2 has A a mass of 35 kg, polar mass moment of inertia about its CoM of 6.14 kg.m. Assume link 2 rotates at the angular acceleration of 400 rad/S²CW and the linear acceleration of 5000 m/s at 180. The CoM of link 2 is located at 500 mm from point A. Determine the force CoM 1300 Frequired to create this instantaneous motion. Both blocks are considered massless. 60°

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The connecting rod of a horizontal reciprocating engine is 400 mm and length of the stroke is 200mm. The mass of the reciprocating parts is 125 kg and that the connecting rod is 100 kg. The radius of gyration of the connecting rod about an axis through the centre of gravity is 120 mm and the distance of centre of gravity of the connecting rod from big end centre is 160 mm. The engine runs at750 r.p.m. Determine graphically the torque exerted on the crankshaft when the crank has turned 30° from the inner dead centre.
An aeroplane makes a complete half circle of 50 metres radius, towards left, when flying at 200 km per hour. The rotary engine and the propeller of the plane has a mass of 400 kg with a radius of gyration of 300 mm. The engine runs at 2400 r.p.m. clockwise, when viewed from the rear. Find the gyroscopic couple on the aircraft and state its effect on it. What will be the effect, if the aeroplane turns to its right instead of to the left ?
Find the magnitude and position of the balancing mass at a radius of 12cm by using graphical method. Three masses m1, m2, m3, are attached to a shaft and revolve in the same plane. The masses are 10kg, 8kg, and 20kg respectively and their radii of rotations are 4cm, 5cm, 6cm.The angular position of the masses m2, m3 are 45° and 135° from the mass m1.
A car is moving on a curved horizontal road of radius 100 m with a speed of 20 m/s. The rotating masses of the engine have an angular speed of 100 rad/s in clockwise direction when viewed from the front of the car The combined moment of inertia of the rotating masses is 10 kg-m².what is the magnitude of the gyroscopic moment in (N-m)?
A, B, C and D are the four masses carried by a shaft in this order. Radii of rotation of the masses are 20cm, 25 cm, 10 cm and 15 cm respectively. The masses of B, C and D are 3 kg, 5 kg and 4 kg respectively.The planes containing B and C are 25 cm apart. Angle between B and C is 90o and between B and D is220o measured in anticlockwise direction. For complete dynamic balance, find (i) The mass and angularposition of A, (ii) The position of planes A and D.
A shaft is rotating at a uniform angular speed. Four masses M1, M2, and M3 and M4 of magnitudes 300kg, 450kg, 360kg, 390kg respectively are attached rigidly to the shaft. The masses are rotating in the same plane. The corresponding radii of rotation are 200mm, 150mm, 250mmand 300mm respectively. The angle made by these masses with horizontal are 0°.45°, 120°and 255°respectively. Find-(i) the magnitude of balancing mass (ii) the position of balancing mass if its radius of rotation is 200mm.
Find the magnitude and position of the balancing mass at a radius of 13cm by using the analytical method. Three masses m1, m2, m3, are attached to a shaft and revolve in the same plane. The masses are 12kg, 10kg, and 15kg respectively and their radii of rotations are 5cm, 6cm, 7cm respectively. The angular position of the masses m2, m3 are 45° and 145° from the mass m1.
A 5.32-kg disk A of radius 0.445 m initially rotating counter-clockwise at 436 rev/min is engaged with a 6.72-kg disk B of radius 0.275 m initially rotating clockwise at 528 rev/min, where the moment of inertia of a disk is given as I = ½ mi?. Determine their combined angular speed (in rpm) and direction of rotation after the meshing of the two disks. Remember to show clearly the equations that you use!!'
bucket of mass m is hanging from the free end of a rope whose other end is wrapped around a drum (radius R, mass M) that can rotate with negligible friction about a stationary horizontal axis. The drum is not a uniform cylinder and has unknown moment of inertia. When you release the bucket from rest, you find that it has a downward acceleration of magnitude a. What are (a) the tension in the cable between the drum and the bucket and (b) the moment of inertia of the drum about its rotation axis?
A 3 kg disk shown is pin supported at its center. The disk is rotated from rest and attains a constant angular velocity of 15 rad/s. If the mass of the rope is negligible and the radius of gyration of the drum is 50 mm; Find out the angular acceleration of the drum and the tension in the rope.
A mass of 500 kg is being lifted at uniform speed of 1.5 m/s by a winch driven by a motor running at a speed of 1000 r/min. The moments of inertia of the motor and winch are 0.5 and 0.3 kg^2, respectively. In the absence of the mass, the motor develops a torque of 100 Nm at a speed of 1000 r/min. Calculate a) the equivalent moment of inertia referred to the motor side; b) the motor torque.
3.32). As shown in Figure 3, a yo-yo toy is formed by wrapping a massless cord around adisk of radius R= 0.2 m and mass M=3 kg. The cord is vertical and its top end is fixed and the disk isinitially stationary. The cord remains vertical for the entire motion and does not slide on the disk.When the disk is released from rest, it falls down by a distance H=0.8 m, The moment of inertia ofthe disk around its center is I disk=1/2mdiskR^2a . Find the angular acceleration of the disk when it is lowered by a distance H.b . Find the angular velocity of the disk when it is lowered by a distance H.