four pole machines generates 250V when operated at 1500 rpm. If the flux per pole is 1.85 x 106 maxwell, the number of armature slots is 45 and the armature winding has two parallel paths. If the speed of the generator is reduced to 1350 rpm, what would be the generated voltage. To what value of flux per pole should the excitation be adjusted if the generated voltage is to remain the same at 250V

four pole machines generates 250V when operated at 1500 rpm. If the flux per pole is 1.85 x 106 maxwell, the number of armature slots is 45 and the armature winding has two parallel paths. If the speed of the generator is reduced to 1350 rpm, what would be the generated voltage. To what value of flux per pole should the excitation be adjusted if the generated voltage is to remain the same at 250V

Electric Motor Control

10th Edition

ISBN:9781133702818

Author:Herman

Publisher:Herman

Chapter3: Magnetic Starters

Section: Chapter Questions

Problem 18SQ

See similar textbooks

Similar questions

In a DC generator, the iron losses at 1000 rpm are 10 kW at a given field current. At a speed of 750 rpm and at the same field current, the total iron losses become 6 kW. Assume the hysteresis loss is directly proportional to the speed and the eddy current loss is proportional to the square of the speed. Determine the iron losses at 500 rpm.
1- The armature of a 2-pole, 200V generator has 400 conductors and runs at 300 r.p.m. Calculate the useful flux per pole. If the number of turns in each field coil is 1200, what is the average value of the electromotive force induced in each coil on breaking the field if the flux dies away completely in 0.1 sec?
The eddy current loss in a DC machine is 600 watts when the total flux is 2, 000, 000 maxwell per pole and the machine is running at 1000 rpm. Determine the loss when the excitation of the machine is adjusted to produce 2, 500, 000 maxwell per pole and the speed is increased to 1200 rpm.
ASAP a.) In a separately excited dc generator, if the current in the field winding increases, the terminal voltage of the machine _______. b.) If the value of the field flux in a dc generator increases, the generated emf will ________. choices: increase, decrease, the same, zero
4. When driven at 1000 r.p.m. with a flux per pole of 0.02 Wb, a d.c. generator has an e.m.f. of 200 V. If the speed is increased to 1100 r.p.m. and at the same time the flux per pole is reduced to 0.019 Wb per pole,what is then the induced e.m.f. ? Subject: Electrical Machine 1
A D.C. shunt wound generator running at constant speed generates a voltage of 120V at a certain value of field current. When flux is reduced by 10% calculate the new value of flux Estimate the change in the generated voltage when the field current is reduced by 10%, assuming the flux is proportional to the field current.
3. A d.c. generator generates an e.m.f. of 520 V. It has 2,000 armature conductors, flux per pole of 0.013 Wb, speed of 1200 r.p.m. and the armature winding has four parallel paths. Find the number of poles. Subject: Electrical Machine 1
An 8 pole, lap connected armature has 500 conductors and its generated e.m.f is 120V. If the flux per pole is 20 mWb, then the speed of machine is, (a) 105 rpm (b) 420 rpm (c) 180 rpm (d) 720 rpm
The hysteresis and eddy current losses of a DC Machine running at 1000 rpm are 250 watts and 100 watts, respectively. If the flux remains constant, at what speed will the total iron loss be halved?
An 8 pole D.C. A generator delivers a current of 150 A at 400 V. It has 1280 armature conductors connected in lap. If the brush is electrically shifted 36° from the load neutral axis, find the demagnetizing and cross magnetizing ampere-turns per pole.
A three-phase Δ-connected six-pole winding is installed in 36 slots on a stator. There are 150 turns of wire in each slot of the windings. All coils in each phase are connected in series. The flux per pole in the machine is 0.060 Wb, and the speed of rotation of the magnetic field is 1000 r/min. (a) What is the frequency of the voltage produced in this winding? (b) What are the resulting phase and terminal voltages of this stator?
7. A 4-pole machine running at 1500 r.p.m. has an armature with 90 slots and 6 conductors per slot. The flux per pole is 10 mWb. Determine the terminal e.m.f. as d.c. Generator if the coils are lap-connected. If the current per conductor is 100 A, determine the electrical power. Subject: Electrical Machine 1