Answered: given material has a modulus of…

given material has a modulus of elasticity E= 200 GPa and shear modulus G= 83.5 GPa, what is the Poisson's ratio for this material?

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.12.6P: Five bars, each having a diameter of 10 mm. support a load P as shown in the figure. Determine the...

See similar textbooks

Related questions

Q: A cylindrical bar of steel 10.4 mm (0.4094 in.) in diameter is to be deformed elastically by…

A: For Solving we need to have the idea about the relationship between stress and strain, and also…

Q: A sheet of metal was deformed elastically under balanced biaxial tension (ox = Oy, 0z = 0) A. Derive…

Q: A steel cable is used to lift a load W with the following given. weight W = 175 kN diameter = 30.03…

Q: Young's modulus of elasticity and Poisson's ratio of a material are 1.25 × 105 MPa and 0.34…

A: As stated in the question, Young's modulus of the material = E = 1.25 x 105 MPa Poisson's ratio = μ…

Q: What is the ratio of shear modulus to the modulus of Elasticity if Poission's ratio is 0.25

A: Given:Poission's ratio, ϑ=0.25

Q: Calculate the total elongation of the bar. Its modulus of elasticity is 70 GPa and the cross…

A: Given data: The cross-sectional area of the bar, A = 600 mm2. Modulus of elasticity of the bar, E =…

Q: If an isotropic material has a shear modulus of 21 Gpa and a Poisson's ratio of 0.4, calculate its…

A: The relation between Young's modulus, shear modulus, and Poisson's ratio is given as: E = 2G (1+μ) E…

Q: The Young's modulus of elasticity of a material is 2.5 times its modulus of rigidity. The Posson's…

A: The given relationship is

Q: given material has a modulus of elasticity E= 250 GPa and shear modulus G= 83.5 GPa, what is the…

A: Modulus of elasticity, E=250 GPa Shear modulus, G=83.5 GPa

Q: A cylindrical rod of steel (E = 207 GPa) having a yield strength of 310 MPa is to be subjected to a…

A: E = 207 GPa Yield strength = 310 MPa Load = 10000 N Original length = 500 mm Elongation = 0.35 mm

Q: If for a given material, E = 2G (E is the modulus of elasticity, G is the shear modulus), then the…

A: Let us represent, Modulus of elasticity = E Shear modulus = G Bulk modulus = K Poisson's ratio = μ…

Q: A cylindrical specimen of some metal alloy 9.0 mm (0.3543 in.) in diameter is stressed elastically…

A: The normal stress in the specimen can be determined as,

Q: Based on the figure below, what is most likely the modulus of elasticity of the material? (MPa} 500…

A: Given:

Q: How can the displacement at specific points on the elastic curve be determined?

A: Beam undergoes two types of deviation while it is bending i.e. linear and angular. The linear…

Q: Determine the total deformation of the steel rod shown in figure (1) under the given loads. Take the…

A: The loads in the different segments of the composite rod are,

Q: A materila has a modulus of elasticity (E=17 Mpa) and a poissons ratio of 0.27. what is the…

A: Given:modulus of elasticity, E=17 MPaPoissons ratio, μ=0.27

Q: stress 37 ksi- strain in 0.002-

Q: A steel bar 100 mm long and having a square cross section 20 mm on an edge is pulled in tension with…

Q: given material has a modulus of elasticity E= 250 GPa and shear modulus G= 83.5 GPa, what is the…

Q: Find the breaking point along the fishing rod assuming that the base of the rod is in a fixed…

A: Given: Diameters of the rods are: a = 9.93 mm b = 7.13 mm c = 5.1 mm Total length of the rod is 2 m.…

Q: When a brass rod of diameter 2 mm is subjected to a tension of Sx10 N, the diameter changes by…

Q: Find the strain energy of a steel rod, of diameter 20 mm and length 400 mm, when it is subjected to…

A: Given:d=20 mmlength, l=400 mmP=40 KNE=200 GPa

Q: Why is it first necessary to relate the internal moment to the radius of the curvature of the…

A: It is necessary to relate the internal moment to the radius of curvature because the radius of…

Q: If an isotropic material has a shear modulus of 21 Gpa and a Poisson's ratio of 0.4, calculate its…

Q: The stress to strain ratio of a material within the elastic limit (i.e., E) is found 55 GPa during…

A: Given data The stress to strain ratio of a material within the elastic limit (i.e., E) is found 55…

Q: If an isotropic material has a shear modulus of 27 Gpa and a Poisson's ratio of 0.42, calculate its…

Q: (c) Consider a cubic element with side length of 4 cm. The element has modulus of elasticity of 80…

A: Given Data⇒Side lengtha=4 cm=0.04 mModulus of elasticityE=80 GPaPoison ratioμ=0.3Forces…

Q: Consider a cylindrical nickel wire 2.3 mm in diameter and 3.4 × 10^4 mm long. Calculate its…

A: Given Length = L = 34000 mm Load = F = 320 N Young's Modulus = E = 207 GPa Diameter = D = 2.3 mm…

Q: Young's modulus of elasticity and Poisson's ratio of a material are 1.25×10^5 MPa and 0.34…

A: Given data: E=1.25×105 MPaμ=0.34 Need to determine the modulus of rigidity of the material.

Q: Q.2 If young's modulus of elasticity of a material is 140 GPa and Bulk modulus is 70 GPa, what will…

A: Data given- E = 140 GPa K = 70 GPa μ = ?

Q: 15. Here is shown a plot of the tensile stress-strain curve for some material. 600 500 MPa (a) What…

Q: Consider a cylindrical nickel wire 1.6 mm in diameter and 3.5 × 104 mm long. Calculate its…

Q: If longitudinal strain for a wire is 0.03 and its Poisson's ratio is 0.5, then its lateral strain is

Q: 2. A bar having a length of 5 in. and cross-sectional area of 0.8 in? is subjected to an axial force…

A: Given:L=5 inA=0.8 in2F=8000 lb∆L=0.003 in

Q: A solid steel rod is 1.5 meters long and has a diameter of 20 mm. The steel rod is assume to be an…

A: Given Diameter, d = 20 mm Shear stress = 145 MPa G = 77 GPa Length, L = 1.5…

Q: A wire made of material that has poisson's ratio = 0.3 and modulus of elasticity E 200 GPa. f the…

A: Given data : Poisson's ratio=μLongitudinal strain=εLModulus of elasticity=ETo find :Lateral strain

Q: A bar having a circular cross section of 3 in. diameter is subjected to a torque of 100 in. # kip.…

A: Given

Q: Find the strain Stress=35.6 MPa Modulus of elasticity=54 MPa

A: Given data : Stress=σ Modulus of elasticity=E Required : Strain

Q: Young's modulus for the material of a substance is 7.25 x 1010 N.m-2 and its bulk modulus is 11 x…

A: Given data : Youngs modulus=EBulk modulus=KTo find :Poisson ratio

Q: 24) The Young's modulus and the shear modulus of material are 120GPa and 45GPA respectively. What is…

A: Given, Young's modulus = E = 120 GPa Shear modulus = G = 45 GPa Let us represent, Bulk modulus = K…

Q: What is the origin of elasticity in material

A: Elasticity is defined as the ability of the material which is deformed to return its original shape…

Q: A given material has Young's modulus E, modulus of rigidity Gand Poisson's ratio 0.25. The ratio of…

A: Given data : Youngs modulus=EModulus of rigidity =GPoisson ratioμ=0.25

Q: . Determine the elastic section modulus, yield moment, the plastic moment, and plastic section…

Q: SOLVE THIS TABLE TOPIC ABOUT STRENGTH OF MATERIALS LABORATORY ?BENDING TEST SECOND STAGE Example:…

Q: A wood specimen having a width "t" of 2 cm, a thickness "w" of 1 mm and a length L of 10 cm is…

A: Any action that can change the state of motion is called force. Force is described by its magnitude,…

Q: A steel wire is 10m long supports a tensile load of 2000N. What is the diameter if the stress is 140…

Q: A compression member constructed from steel rod (E = 200 GPa, v = 0.25) has outside diameter of 82…

A: Given data diameter of rod (d) = 82 mm ∆d = 0.0087 mm E = 200 GPa v = 0.25 Material behave…

Q: Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a…

Concept explainers

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.

Question

given material has a modulus of elasticity E= 200 GPa and shear modulus G= 83.5 GPa, what is the
Poisson's ratio for this material?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A steel wire- and an aluminum allay wire have equal lengths, and support equal loads P (see figure). The moduli of elasticity for the steel and aluminum alloy are Ea= 30,000 ksi and Ea= 11,000 ksi, respectively. (a) IF the wires have the same diameters, what is the ratio of the elongation of the aluminum alloy wire to the elongation of the steel wire? (b) If the wires stretch the same amount, what is the ratio of the diameter of the aluminum alloy wire to the diameter of the steel wire? (c) If the wires have the same diameters and same load P, what is the ratio of the initial length of the aluminum alloy wire to that of the steel wire if the aluminum alloy wire stretches 1.5 limes that of the steel wire? (d) If the wires have the same diameters, same initial length, and same load P. what is the material of the upper wire if it elongates 1.7 times that of the steel wire?
Five bars, each having a diameter of 10 mm. support a load P as shown in the figure. Determine the plastic load Ppif the material is clastoplastic with yield stress
Three prismatic bars, two of material A and one of material B. transmit a tensile load P (see figure). The two outer bars (material A) are identical. The cross-sectional area of the middle bar (material B) is 50% larger than the cross-sectional area of one of the outer bars. Also, the modulus of elasticity of material A is twice that of material B. (a) What fraction of the load P is transmitted by the middle bar? (b) What is the ratio of the stress in the middle bar to the stress in the outer bars? (c) What is the ratio of the strain in the middle bar to the strain in the outer bars?
A bungee cord that behaves linearly elastically has an unstressed length L0= 760 mm and a stiffness k = 140 N/m. The cord is attached to two pegs, distance/? = 380 mm apart, and is pulled at its midpoint by a Force P = 80 N (see figure). (a) How much strain energy U is stored in the cord? (b) What is the displacement Scof the point where the load is applied? (c) Compare the strain energy (with the quantity PSC12. Note: The elongation of the cord is not small compared lo its original length.
If an isotropic material has a shear modulus of 21 Gpa and a Poisson’s ratio of 0.4, calculate its Young’s modulus. Select one: E = 59 Gpa E = 300 Gpa E = 30 Gpa E = 80 Gpa E = 450 Gpa
A structural material has a modulus of elasticity of 8 x 10^6 psi and a modulus of rigidity of 3.2 x 10^6 psi. Find the value of Poisson's ratio.
If a force of 300 kN is applied to the top of a circular steel bar with a diameter of 150mm and a length of 300mm, reducing the length of the reaxial direction by 0.16mm, and increasing the diameter of the cross section by 0.01mm, what is the modulus of elasticity E and poisson's ratio of the steel rod?
A rectangular bar of length L has a slot in the central half of its length. The bar has width b, thickness t, and elastic modulus E. The slot has width b/3. The overall length of the bar is L = 560 mm, and the elastic modulus of the material is 68 GPa. If the average normal stress in the central portion of the bar is 210 MPa, calculate the overall elongation δ of the bar.
A materila has a modulus of elasticity (E=17 Mpa) and a poissons ratio of 0.27. what is the approximate value of the shear modulus, G?
Why is it first necessary to relate the internal moment to the radius of the curvature of the elastic curve?
Sketch a load-displacement plot for a linear elastic material, then illustrate on the plot how V (the stored strain energy) is represented in the sketch.
A cylindrical rod of an isotropic material with a diameter (d0) of 16 mm is loaded with a 5,700 N load along its major axis. If the material has a Young’s modulus (E) of 120.0 GPa and shear modulus of elasticity (G) of 40.9 GPa, what is the strain vector for an axis rotated 20 degrees counter-clockwise about the z-axis.