H.W 1: A 380 V, 60 Hz, Star connected, 870 r.p.m., Eight poles, Three-Phase Induction Motor has the following per phase parameters: R1 = 0.07, R2 = 0.05, X1 = X2 = 0.2, Xm = 6.5, Draw the exact equivalent circuit and determine the following: %3D VIII. Magnetizing Current IX. Stator copper loss X. Rotor copper loss

H.W 1: A 380 V, 60 Hz, Star connected, 870 r.p.m., Eight poles, Three-Phase Induction Motor has the following per phase parameters: R1 = 0.07, R2 = 0.05, X1 = X2 = 0.2, Xm = 6.5, Draw the exact equivalent circuit and determine the following: %3D VIII. Magnetizing Current IX. Stator copper loss X. Rotor copper loss

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter6: Power Flows

Section: Chapter Questions

Problem 6.48P

See similar textbooks

Similar questions

The effective resistance of a 2200 V, 50 Hz, 440 KVA, 1 -phase alternator is 0.5 ohm. On short-circuit, a field current of 40 A gives the full load current of 200 AS. The electromotive force on open-circuits with same field excitation is 1160 V. Then the synchronous impedance and reactance is _______ ohm and _______ ohm respectively.
A long shunt compound de generator delivers a load current of 70 A at 384 V and has armature, series field and shunt field resistances of 0.098 ohms, 0.026 ohms, and 264 ohms, respectively. Calculate the armature current in ampere.
3-phase,50 Hz, delta connected generator, its stator winding having 12sninai ns pole pair and 6 conductors in each, if the total air gap flux is 160mwb. Find the terminal voltage. The prime mover speed is 750rpm.
The data obtained in the idling test performed on a three-phase star-connected asynchronous motor; It is 1200V, 5500W, 9.5A. The data obtained in the short circuit experiment on the same motor is 250V,It is 14500W and 100A. For the case where the slip of the motor is 5%, create the approximate equivalent circuit of the motor (L type equivalent circuit), draw the equivalent circuit, find the values of the circuit elements and MUST AND MUST write them ON THE EQUIVALENT CIRCUIT. R and X values will be used in circuit elements, not Z.
Picture Single phase equivalent examples of a 3-phase star connected induction motor are given below. Total mechanical losses and negligence losses. Rated Power 4kW Rated voltage 380 Vrms line (220Vrms phase-neutral voltage) Rated frequency 50Hz Number of poles 4 r1= 1.5 Ω, x1 = 1.5jΩ, r2= 0.55Ω, x2 = 1.25jΩ, xm= 14jΩ, rc= ∞ This motor slippage is measured at 3% (s = 0.03) when loaded with a load below the rated point.
A 3-Phase 10Kva, 400 V, 50Hz star connected alternator supplies a rated load at 0.8 power factor lagging. If the armature resistance per phase is 0.5Ჲ and the synchronous reactance is 10Ჲ, using the e.m.f method, estimate the alternator’s voltage regulation
A long shunt generator delivers 25kW at 220V. The shunt, series and armature resistances are 50ohms, 0.02ohms, and 0.05ohms respectively, calculate the generated emf.
Consider a three-phase 13.8 kV, 25-MVA, Y-connected synchronous generator whose three-phase short-circuit losses are 52.8 kW at rated armature current. Calculate its armature resistance per phase. a-0.16 Ohm b-0.016 Ohm -1.016 Ohm: d- 603.2 A e-0.7 Ohm.
electrical machines 3. 400 V 50 Hz, Y-connected, 6-pole synchronous generator per phase synchronous reactance 1.0 Ω at back power factor of 0.9 full load armature current 50 A, friction and wind losses 1.25 kW and core losses at 50Hz full load 1.0 kW and armature resistance and loss are neglected. The excitation current is adjusted so that the no-load output voltage is 400V. According to this; a) Calculate the rotation speed of the generator. b) find the terminal voltages at load with rated current at 0.8 back power factor and unit power factor . c) Calculate the voltage regulation of the generator for power coefficients of 0.8 back and 1.0.
A compound dc generator is supplying a load of 120A and 120V. The shunt field,series field and armature resistances are 32 ohms 0.07 ohms and 0.1 ohms respectively. Find the generated voltage in LONG SHUNT CONNECTION and SHORT SHUNT Connection NOTE: DRAW THE EQUIVALENT CIRCUIT DIAGRAM
A three-phase wye-connected wound rotor synchronous generator rated at 10 KVA, 230 v has synchronous reactance of 1.2 ohms per phase and armature resistance of 0.5 ohm per phase. What is the power factor such that the voltage regulation at full-load is zero?
A long-shunt compound generator delivers a load current of 50A at 500V and has armature, series field and shunt field resistances of 0.05 ohms, 0.03 ohms and 250 ohms respectively. Calculate the generated voltage and the armature current. Allow 1V per brush for contact drop.