i. High porosity is associated with binder jetted parts even with infiltration. ii. Binder jetting can be used to print metal parts without sintering for ornamental purposes. ii. Multiple jets containing different material composition or concentration could be employed to print parts with composition and density variation on a fine scale using binderjetting technology. iv. Sand found in beach at its natural state can be printed with binder jetting. v. Powder recoating and binder jetting are performed on this inclined build surface with Voxel line of binder jetting machines.

i. High porosity is associated with binder jetted parts even with infiltration. ii. Binder jetting can be used to print metal parts without sintering for ornamental purposes. ii. Multiple jets containing different material composition or concentration could be employed to print parts with composition and density variation on a fine scale using binderjetting technology. iv. Sand found in beach at its natural state can be printed with binder jetting. v. Powder recoating and binder jetting are performed on this inclined build surface with Voxel line of binder jetting machines.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

لانقطة واحدة of Warm working The advantages over cold working are: 1) forces and power are higher,2) more intricate work geometries possible, and 3) need for annealing may be reduced .or eliminated T F Blow molding is an important industrial process for making one- piece hollow plastic parts with thick .walls T Sly The sequence of the Blow Molding is automated and often integrated with downstream operations such .as bottle filling and labeling T لنقطة واحدة
نقطة واحدة The third sequence in the Injection machine of polymers, a shot of melt, which has been brought to the right temperature and viscosity by heating and the mechanical working of the screw, is injected under high pressure into the mold .cavity TO FO * Coppola is used to convert pig iron to gray .cast iron TO F LL
Based on the table below, which of the statements below is/are correct regarding the 3D printing process shown in the schematic? a.You can produce a room-temperature non-fragile 225C oven-safe food container with at least one material from the above table using this process and a 280C nozzle b.You can use this process to print plastic or brittle objects but not elastomers and rubbers c.Manufacturing a thermoplastic HDPE hose with an extrusion nozzle heated to 175C is possible with this process d.You can print thermoplastic and thermoset polymers with this process, you only need to make sure that the nozzle specs and the crosslinking conditions match the polymer requirements e.This process is best suited for the low volume production of tubes, bars and beams due to the nature of the extrusion process
In using ATR-FITR, the powder sample must be suspended in liquid and not be in direct contact with ATR crystal. True False
1.What is the benefit of using investment casting for the production of a turbine rotor compared to other casting processes? 2.What are the advantages and disadvantages of using Additive Manufacturing techniques to produce patterns for the investment casting process, compared to conventional methods? 3.Which Additive Manufacturing materials and processes (according to the ISO/ASTM 52900 standard) is mostly used during the manufacturing of patterns for the investment casting process?List the advantages and disadvantages of each of the AM processes.
(a) There are two types of rapid prototyping (RP) machine under liquid category, Stereolithography (STL) and Solid Ground Curing (SGC). Company A is planning to fabricate below part (Figure 1) using liquid based RP machine. Suggest which machines is more suitable and justify your answer. Consider the component thickness, width and orientation in your answer. 40 70 40 Figure 1
What are the factors that affect on the sintering process
Process of forming metal powder by directing molten metal through an orifice after which it is break into small particle using high pressure fluid is sintering Select one: True False
Based on the table below, which of the statements below is/are correct regarding the 3D printing process shown in the schematic? Z AXIS X AXIS YAXIS LEGEND A: Extruder B: Nozzle C: Printed part D: Hot plate E: Filament Table 15.2 Melting and Glass Transition Temperatures for Some of the More Common Polymeric Materials Material Polyethylene (low density) Polytetrafluoroethylene Polyethylene (high density) Polypropylene Nylon 6,6 Polyester (PET) Poly(vinyl chloride) Polystyrene Polycarbonate Glass Transition Temperature [°C (°F)] -110 (-165) -97 (-140) -90 (-130) -18 (0) 57 (135) 69 (155) 87 (190) 100 (212) 150 (300) Melting Temperature [°C (°F)] 115 (240) 327 (620) 137 (279) 175 (347) 265 (510) 265 (510) 212 (415) 240 (465) 265 (510) a. This process is best suited for the low volume production of tubes, bars and beams due to the nature of the extrusion process b. Manufacturing a thermoplastic HDPE hose with an extrusion nozzle heated to 175C is possible with this process □c. You can…
Atomization, electrolytic deposition and reduction methods are used to produce metal Powders Select one: True False
27. A Titanium part built by Selective Laser Melting (SLM) has a height of 95mm. Estimate the total build time for the part in hours and minutes (excluding set-up and clean-up processes) if each layer is 50 µm thick; the laser scanning time per layer is an average of 43 seconds; the powder recoating time for each layer is 30 seconds; and every 5th layer is scanned twice by the laser for in-situ heat treatment.
In additive manufacturing Briefly Describe the General Process and Printing Method of 3D Printing? and Compared with The Conventional 3D Printing? and What Is the Difference Between 3D Color Printing Binders