If 60MHz of total spectrum is allocated for a duplex wireless cellular system and each simplex channel has 15kHz RF bandwidth, find: (a) The number of duplex channels (5) (5) (10) 4 (b) The total of channels per cell site, if i=3 and j = 3 cell reuse is used. Repeat the above using TDD. Find the system capacity (C) for the reuse cell, if N is replicated (M) is 5.

If 60MHz of total spectrum is allocated for a duplex wireless cellular system and each simplex channel has 15kHz RF bandwidth, find: (a) The number of duplex channels (5) (5) (10) 4 (b) The total of channels per cell site, if i=3 and j = 3 cell reuse is used. Repeat the above using TDD. Find the system capacity (C) for the reuse cell, if N is replicated (M) is 5.

Operations Research : Applications and Algorithms

4th Edition

ISBN:9780534380588

Author:Wayne L. Winston

Publisher:Wayne L. Winston

Chapter20: Queuing Theory

Section20.10: Exponential Queues In Series And Open Queuing Networks

Problem 8P

See similar textbooks

Similar questions

Consider a satellite link with a capacity of 1 Mbps, bit error rate 10^-8 , and propagation delay of 270 msec. Assuming selective reject ARQ with a window of 64 and 10,000 bit frames, calculate the maximum link utilization
Unless specified otherwise, use the free space propagation speed of light 3x108 m/s to calculate the propagation delay. For numerical calculations, the results must show the appropriate unit. Show a complete solution for each problem2. Suppose network users share a 4 Mbps link. Also, suppose each user requires 200 kbps when transmitting, but each user transmits only 15% of time.a. When circuit switching is used, how many users can be supported?b. Suppose packet switching is now used and that there are 20 users. Find the probability that any given time, at most 4 users are transmitting simultaneously.
Assume you are working as a Network Engineer for a Telecommunications service provider and your task is to estimate the feasibility of a 20 km link between two buildings with one access point and one client radio. The access point is connected to an antenna with 12 dBi gain, with a transmitting power of 500 mW and a receive sensitivity of -84 dBm. The client is connected to an antenna with 10 dBi gain, with a transmitting power of 16 dBm and a receive sensitivity of -82 dBm. The cables in both systems are short, with a loss of 3 dB at each side at the 900 MHz frequency of operation. What is the link margin? By examining the link margin, comment on the reliability of the link.
Que.a) Consider a CSMA/CD network that transmits data at a rate of 400 x 106 bits per second. The maximum signal propagation time from one node to another node is 20 microseconds. The minimum size of a frame in the network is(. bytes).
For the microwave link shown below, what is the value of the free-space path loss if the operating frequency is 11.8 GHz? For the above microwave link, find the maximum allowed distance between the transmitter and the receiver to maintain the communication, if the transmitter antenna height is ht=30m and the receiver antenna height is hr=25 m.
In the communication in the figureFor Link 1; Bandwidth 150 Mbps Line Length 5 km For Link 2; Bandwidth 50 Mbps Line Length 2000 km For Link 3; Bandwidth 1000 Mbps Line Length 1 km For 4000 bit packet length and the case where fiber optic and light speed of all connections are 3x10^8 m / sec; Question 2. Assuming there are no queue and processing delays, calculate the end-to-end delay in milliseconds.
In the communication in the figureFor Link 1; Bandwidth 150 Mbps Line Length 5 km For Link 2; Bandwidth 50 Mbps Line Length 2000 km For Link 3; Bandwidth 1000 Mbps Line Length 1 km For 4000 bit packet length and the case where fiber optic and light speed of all connections are 3x10^8 m / sec; Question 1. What is the transmission and propagation delays for each line?Question 2. Assuming there are no queue and processing delays, calculate the end-to-end delay in milliseconds.
given an original bandwidth need of x, if dsss makes use of a 7 bit chip code, how large must the bandwitdh be to support DSSS? Solve it with the correct and proper explanation please...! It is important for me please need a proper and correct explanation...!
Assume that in a gNB there will be 100 subscribers at 5Mbps 200 subscribers at 1Mbps 300 subscribers at 512 kbps and 400 subscribers at 256 Kbps Given 10MHz for a 5G cell. Assume d4=R the radius of the cell, d4- d3= d3-d2= d2-d1 and d1 =0.4R. Removing the Reference Signals (RS) in each of the PRB and then consider 30% of the total available Resource Elements (RE) will be used for control purposes (therefore not considering the removal of the 3 OFDM symbol anymore), Calculate the aggregated downlink throughput of this cell, Calculate the radius of this cell with user density 1000/km2 and the given average user data rate 1056kbps. Assuming a circular cell with an area of pR2. If twice as many handsets are distributed in this cell area, would the average rate be reduced to half or even lower? Why?
5 points Find the latency of Token Ring (in bits) where data rate of link is 20 Mbps and 40 stations separated by 100 meters and bit delay at each station is 1 bit. (Assume propagation speed as 2x105 m/sec)
A 16 x 16 Router, where each input runs at 7 Gbps. Assume, the average RTT= 120 msec. What is the rule of thumb for the minimum router buffer size in Mbytes?
A simple point-to-point microwave transmission link has no redundancy. Failure of the link will result in an outage. Therefore, typical microwave transmission links are designed with redundancy. Explain the following redundancy techniques 1+1 Hot Standby (HSB), 1+1 Space Diversity (SD), and 1+1 FD.explain.