Answered: If the primary consolidation settlement…

If the primary consolidation settlement of a clay layer is calculated to be 396 mm, what is the settlement at the time corresponding to a time factor, Tv=0.197? (Unit: mm) Your Answer:

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter9: Consolidation

Section: Chapter Questions

Problem 9.2P

See similar textbooks

Related questions

Q: 3. Check the suitability of the W12x65 section made of A992 steel for the axial loads and moments…

A: Effective length of the column in x-axis buckling = Kx Lx= 1.4*14= 19.6 ft = 235.2 in Effective…

Q: SOLID STEEL SHAT 5m LONG IS STRESSED AT 80 MPa WHEN TWISTED THROUGH 4°. USING G = 83 GPa, COMPUTE…

Q: hich of the following second order transient respom

A: option (a) is the correct answer. Damping in structural systems is depicted by the term called as…

Q: Beams 1. A simply supported beam must carry the factored ultimate loads (two 15KN point loads) shown…

A: fy = 350MPa fall = 0.9 x 350 = 315

Q: AW18 × 40 standard steel shape is used to support the loads shown on the beam. Assume P = 21 kips, w…

Q: An extruded polymer beam is subjected toa bending moment M. The length of the beam is L = 500 mm.…

Q: Determine the stress (in psi) in member BD if the cross-sectional area of the BD is 2.39 in? P =…

A: Using EQUILIBRIUM equation calculate the force in member BD. Then the stress can be calculated using…

Q: What is meant by the shear strength of soils? O A. Shear strength of a soil is its internal…

A: step 1-

Q: A plastic beam has a cross section with dimensions of a = 2.5 in., b = 8.8 in., d = 5 in., and t =…

Q: The Howe truss is subjected to the loading shown. Determine the force in member BC in kN. Use…

Q: Water is flowing steadily in a horizontal elbow and nozzle combination shown in the figure. The gage…

Q: A plastic beam has a cross section with dimensions of a = 4.6 in., b = 16.1 in., d = 9.2 in., and t…

Q: 3. An Open cylindrical vessel having a height equal to its diameter is half filled with water and…

Q: Three plates are welded together to form the section shown. Dimensions of the cross section are b =…

A: First we need to divide the section into 3 different parts. Then we need to calculate the neutral…

Q: A small aluminum alloy [E = 65 GPa] tee shape is used as a simply supported beam as shown. For this…

Q: The extruded plastic shape will be subjected to an internal shear force of V = 395 lb. Dimensions of…

A: The extruded plastic shape which is supported to the an interior force are given in the question.…

Q: HW12: The inflow hydrograph to a reservoir river (at section 1) is given in Table 12.1. The head…

A: The given data is:

Q: Three plates are welded together to form the section shown. Dimensions of the cross section areb-4.7…

Q: Three plates are welded together to form the section shown. Dimensions of the cross section are b =…

Q: Question 5 If the clay is OC, pre-consolidation pressure, Pc=200 kPa, Cc=0.1, Cr=0.025, eo=0.9,…

Q: Classify the structure as statically determinate (Write SD), statically indeterminate (Write only…

Q: A simply supported wood beam that is 13.8 m long carries a 35 kN concentrated load at B. The…

Q: he axial force and the bending moment Diagrams

Q: 10 kN 3 kN/m B A 2m 3m 3 m

A: A loaded beam is given and it has been asked to determine shear force and bending moment. Please…

Q: A saturated clay slope is sliding along with a circularly cylinder failure surface shown in the…

Q: A normally consolidated clay layer of 4 m in thikness has overburden stress of 96.7 kPa and final…

A: step 1-

Q: A roller BEoller rollerC

Q: Two solid cylindrical rods support a load of P = 39 kN, as shown. Rod (1) has a diameter of 16 mm…

A: An arrangement of members have been given and it has been asked to determine stress in rod 1. Please…

Q: A two-storey school (use classroom) has interior columns that are spaced in 4.5 meters apart in two…

A: A two-storey school (use classroom) has interior columns that are spaced in 4.5 meters apart in two…

Q: 3- Following are the results of a laboratory consolidation test on a sample of undisturbed clay…

A: Draw the horizontal line from maximum curvature Draw tangent from the maximum curvature point…

Q: Your answer is incorrect. An extruded polymer beam is subjected to a bending moment M. The length of…

Q: A SOLID ALUMINUM SHAFT 2 INCH DIAMETER IS SUBJECTED TO TwO TORQUES AS SHOWN IN THE FIGURE. DETERMINE…

Q: A water sample contains 40 mg/L of magnesium, 75 mg/L of calcium, and 10 mg/L of sodium. What is…

Q: The homogeneous bar ABC is supported by a pin at C and a cable that runs from A to B around the…

Q: A0.350 in. diameter solid steel shaft supports two pulleys. The shaft has a length of L = 6.3 in.,…

Q: Draw the shear and moment diagram of the given beam. Consider support A is roller and B is pin. 4 kN…

A: We will find reactions first.

Q: The soil is having a saturated unit weight 18.0 kN/m and dry unit weight of 11 kN/m. The water table…

A: Saturated unit weight of soil = 18KN/m3 Dry unit weight of soil = 11KN/m3 Given two diagrams in Fig…

Q: Angle of line A, B, and C were to be analyzed when the surveyor found out that the True North (N')…

Q: If each bolt has the same diameter and the applied load is the same on all three structures, then…

Q: In a direct shear test on a specimen of cohesionless soil (sand), the vertical normal stress on the…

Q: SITUATION 2. A rectangular concrete beam has a width of 300 mm and an effective depth of 550 mm. The…

Q: Figure below represent contour lines for ground surface and wells located on it 50 w2 W1 fill table…

A: given-water table elevation of wells-W1=60W2=50W3=40

Q: A large rank contains 100 gal of brine in which 10 lb of salt is dissolved. Brine containing 0.2 lb…

A: Here as given, Brackish water containing 0.2 lbs entering tank at 6gal/min Salt entering tank rate=…

Q: PI Elevation 82 PC Elevation PT What is the total length of the curve in meters, consider the…

Q: Question 29 Given a slope with B =35.5 degrees and the sandy soil has shear strength c = and o'…

A: Given data, ϕ' = ϕd = 34°; β = 35.5° θ = ? We know that the Formula of most critical plane which…

Q: Three plates are welded together to form the section shown. Dimensions of the cross section are b =…

A: Given data, Shear force = V = 36 kips The dimensions of the cross-section are:- b = 3.2 in d = 9.6…

Q: Three plates are welded together to form the section shown. Dimensions of the cross section are b =…

A: To find out the shear flow through the welded surface at B.

Q: Classify the structure as statically determinate, statically indeterminate or unstable.

Q: Q\ Draw Orthographic Projections R22 12 R14 10 ッRI2 12 R12 106 82 12 12 R10 RIO 12

A: First Draw the line perpendicular to each other and project the multiple views as shown in the…

Q: For the truss and loading shown, determine the magnitude of the normal stress(in psi) in member CE,…

Question

100%

Q9 Please provide justified answer asap to get a upvote

Question 9
If the primary consolidation settlement of a clay layer is calculated to be 396 mm,
what is the settlement at the time corresponding to a time factor, Tv=0.197? (Unit:
mm)
Your Answer:
CS Scanned with CamScanner

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A clay layer 5 m thick has double drainage. It was consolidated under a load of 127.5 kN/m2. The load is increased to 197.5 kN/m2. The coefficient of volume compressibility is 5.79 × 10^–4 m2/Kn and value of k = 1.6 × 10^–8 m/min. If the test sample is 2 cm thick and attains 100% consolidation in 24 hours, what is the time in days taken for 100% consolidation in the actual layer? a. 67,500 b. 65,000 c. 62,500 d. 60,000
Refer to the soil profile shown in Figure P2.12. The clay is normally consolidated. A laboratory consolidation test on the clay gave the results: If the average effective stress on the clay layer increase by 50 kN/m2.a. What would be the total consolidation settlement?b. If Cv = 9.36 x 10-4 cm2/sec, how long will it take for half the consolidation settlement to take place?
A soil profile is shown in the figure. A uniformly distributed load of 50 KPa is applied at the ground surface. Due to primary consolidation, A. Calculate the settlement of the clay layer if the pre-consolidation pressure (Pc) is 170 KPa.
A saturated clay specimen is subjected to a pressure of 240 kN/m2. After the lapse of a time, it is determined that the pore pressure in the specimen is 72 kN/m2. What is the degree of consolidation? Show free body diagram. a.75% b.60% c.70% d.65%
A clay layer 5 m thick has double drainage. It was consolidated under a load of 127.5 kN/m2. The load is increased to 197.5 kN/m2. The coefficient of volume compressibility is 5.79 × 10^–4 m2/Kn and value of k = 1.6 × 10^–8 m/min. If the test sample is 2 cm thick and attains 100% consolidation in 24 hours, what is the time in days taken for 100% consolidation in the actual layer? Show diagram
A site has 20 m of saturated clay (saturated density = 1.6 Mg/m3) over hard bedrock. The settlement analysis for the clay under a new structure forecast that the ultimate consolidation settlement will be about 0.2 m. After 9 months, 0.1 m of settlement has occurred. a) What will be the consolidation settlement after 3 years ( 1 yr = 365 days)? b) Estimate the time it will take for the ultimate consolidation settlement of 0.15m to occur? (Use T95 for your estimate) Provide your answer in years.
The time required for a 50% consolidation of a 25 mm thick layer (drained at both sides) in the laboratory is 2 min and 20 sec. How long in days will it take for a 3 m thick layer of the same clay in the field under the same pressure increment to reach 50% consolidation? In the field there is a rock layer at the bottom of the clay.
Take a look at the figure below. Estimate the primary consolidation settlement in the clay layer. The increase in stress is 85 kN/m2, H1 = 2m, H2 = 4m and H3 = 6m. Soil characteristics are as follows:• Sand: e = 0.65; Gs = 2.66• Clay: LL = 54; e = 0.98; Gs = 2.74; pre-consolidation stress = 150 kN/m2; Cs = Cc/6
A soil profile is shown in the figure. A uniformly distributed load of 50 KPa is applied at the ground surface. Due to primary consolidation, A. Calculate the settlement of the clay layer if it is normally consolidated. B. Calculate the settlement of the clay layer if the pre-consolidation pressure (Pc) is 190 KPa. C. Calculate the settlement of the clay layer if the pre-consolidation pressure (Pc) is 170 KPa.
A circular foundation 2m in diameter is shown in the figure below. A normallyconsolidated clay layer 5m thick is located below the foundation. Determine the consolidation settlement of the clay. 1- method 2:1 2- consolidation settlement Cc method
The time required for a 50% consolidation of a 25 mm thick layer (drained at both sides) in the laboratory is 2 min and 20 sec. How long in days will it take in the field for 30% primary consolidation to occur?
For normally consolidated clay layer in the field, the ff. values are given: Thickness of clay layer = 8.5ft, Void Ratio = 0.8; Compression Index = 0.28; Average effective pressure on the clay layer is 2650 lb/ft2; ∆σ = 970 lb/ft2; Secondary Compression index = 0.02. What is the total consolidation settlement of the clay layer five years after the completion of primary consolidation settlement? Time for completion of primary settlement = 1.5 years)