In a 110-V compound generator, the resistances of the armature, shunt and the series windings are 0.06 0, 252 and 0.04 2 respectively. The load consists of 200 lamps each rated at 55 W, 110 V. Find the total electromotive force and armature current when the machine is connected (i) long shunt (ii) short shunt. Ignore armature reaction and brush drop.

In a 110-V compound generator, the resistances of the armature, shunt and the series windings are 0.06 0, 252 and 0.04 2 respectively. The load consists of 200 lamps each rated at 55 W, 110 V. Find the total electromotive force and armature current when the machine is connected (i) long shunt (ii) short shunt. Ignore armature reaction and brush drop.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A compound DC generator has a series resistance divided equally and connected in series with the load and the armature. If this generator is rated at 720 V with an armature resistance of 0.1 Ω, shunt resistance of 240 Ω and a (total) series field resistance of 0.6 Ω, find the generated emf if it delivers 100 A?
A 250 V, compound generator has armature, series field and shunt felid resistance of 0.4 Ω, 0.2 Ω and 125 Ω respectively. If this generator supply10 Kw ,at rated voltage. Ignore armature reaction and assuming a drop of 1 volt per brush. Find the induce e.m.f and the armature current when the machine is connected Short compound . إضافة ملف
A 250 V, compound generator has armature, series field and shunt felid resistance of 0.4 Ω, 0.2 Ω and 125 Ω respectively. If this generator supply10 Kw ,at rated voltage. Ignore armature reaction and assuming a drop of 1 volt per brush. Find the induce e.m.f and the armature current when the machine is connected Short compound .
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
The output of a shunt generator is 66 A at 100 volts. Armature and field resistances are, respectively, 0.04 ohm and 25 ohms. If the efficiency at this load is 88%, determine the core and friction losses
A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed of 500 r.p.m., has a shunt field resistance of 100 Ω, a series field resistance of 0.05 Ω and an armature resistance of 0.2 Ω. If the flux per pole is 48.798 mWb and a total of 620 conductors, calculate the following: (a) the generated voltage, (b) the field currents, (c) the power generated in the armature.
The terminal voltage of a 75-kW shunt generator is 600 V at rated load. The resistance of the shunt-field circuit is 150 Q, and the armature-circuit resistance is 0.1 Ω. Find the generated emf. a) 612.9 V b) 621.9 V c) 692.1 V d) none of the above In a 50-kW 245-V shunt generator, 258 V are generated in the armature when the generator delivers rated load at rated voltage. The shunt-field current is 4 A. Find the resistance of the armature. a) 0.03 Ω b) 0.062 Ω c) 0.106 Ω d) none of the above A load that has a resistance of 8 Ω is connected to a separately excited generator that has an armature-circuit resistance of 0.5 Ω. A) What is the armature current when the generated emf is 130 V? a) 1.53 A b) 15.3 A c) 153 A d) none of the above
7) The flux per pole of a four-pole generator is 0.05 wb. It driven at a speed of 1500 rpm. In order to have an induced emf of 20 v per conductor, , if the winding is lap-connected, find (a) the number of conductors in series in each parallel path, (b) the number of conductors between brushes to generate 240 v, and (c) the total number of conductors in the armature.
A 20 kW, 440-V, short-shunt, compound d.c. generator has a full-loade fficiency of 87%. If the resistance of the armature and interpoles is 0.4Ω and that of the series and shunt fields 0.25 Ω and 240 Ω respectively, calculate the combined bearing friction, windage and core-loss of the machine. [Ans. 725 W]
A series generator having a combined armature and field resistance of 0.4 ohm usrunning at 1000 rpm and delivering 5.5 kW at a terminal voltage of 110 V. If thespeed is raised to 1500 rpm and load adjusted to 10 kW, find the new terminalvoltage. Assume the machine is working on straight line portion of magnetizationcharacteristics.
A 20 kW, 440-V, short-shunt, compound d.c. generator has a full-load efficiency of 87%. If the esistance of the armature and interpoles is 0.4 ohms and that of the series and shunt fields 0.25 ohms and 240 ohms respectively, calculate the combined bearing friction, windage and core-loss of the machine.
A separately excited D.C. generator has an armature circuit resistance of 0.1 ohms. And the total brush-drop is 2 V. When running at 1000 r.p.m., it delivers a current of 100 A at 250 V to a load of constant resistance. If the generator speed drop to 700 r.p.m., with field-current unaltered, find the current delivered to load.