Solve this asap. Should 100% correct. In a single-flash geothermal power plant, geothermalwater enters the flash chamber (a throttling valve) at230°C as a saturated liquid at a rate of 45 kg/s. Thesteam resulting from the flashing process enters aturbine and leaves at 20 kPa with a moisture content of5 percent. Use data from the tables.Flashchamber230°Csat. liq.~SeparatorLiquidSteamturbine420 kPax=0.95Determine the temperature of the steam after the flashing process andthe power output from the turbine if the pressure of the steam at the exitof the flash chamber is 100 kPa.The temperature of the steam isThe power output from the turbine is°C.kW.

Consider that the steam is flowing in the steady-flow system state that is a controlled volume…

In a single-flash geothermal power plant, geothermal water enters the flash chamber (a throttling valve) at 230°C as a saturated liquid at a rate of 45 kg/s. The steam resulting from the flashing process enters a turbine and leaves at 20 kPa with a moisture content of 5 percent. Use data from the tables. Plash chamber Separator

In a single-flash geothermal power plant, geothermal water enters the flash chamber (a throttling valve) at 230°C as a saturated liquid at a rate of 45 kg/s. The steam resulting from the flashing process enters a turbine and leaves at 20 kPa with a moisture content of 5 percent. Use data from the tables. Plash chamber Separator

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter36: Refrigeration Applied To Air-conditioning

Section: Chapter Questions

Problem 9RQ: What are higher-efficiency refrigerant blends that can be used as long-term replacements for R-22 in...

See similar textbooks

Similar questions

Referring to Problem 1.74, how many kilograms of ice can a 3-ton refrigeration unit produce in a 24-h period? The heat of fusion of water is 330 kJ/kg.
16-Water vapor enters an isentropic turbine at a pressure of 3 MPa and a temperature of 400°C and exits the turbine at a pressure of 100 kPa. What is the degree of dryness at the turbine outlet? A) % 92,8 B) % 81,5 C) % 76,4 D) % 95,5 E) % 89,9
21 - The mass flow rate of water entering a turbine is 17.7 kg/s and its enthalpy is 3817.2 kJ/kg. The water exits the turbine as wet steam at a pressure of 100 kPa with a dryness degree of 0.92. What is the power produced in the turbine? a) 23413.4 kW B) 15476.6 kW NS) 13951.5 kW D) 11802.9 kW TO) 20271.5 kW
In a closed feedwater (FW) heater, a mixture enters the heater with a mass flow rate m1 and enthalpy h1 and leaves with an enthalpy h2. A second stream into the heater has a mass flow rate m2 and enthalpy h3 and it leaves with an enthalpy h4. What is a correct first law equation for this FW heater? m1·(h3 - h4) = m2·(h1 - h2) m1·(h1 - h2) = m2·(h4 - h3) m1·(h1 - h2) = m2·(h3 - h4) m1·m2 = (h1 -h2)·(h3 - h4) m1·(h1 - h3) = m2·(h2 - h4)
For the NH3/H2O cycle the following relationship give the solution flow rate per unit refrigeration rate: WFS_A * X - WFS_G(X-1) = 1 whereWFS_A = mass fraction of NH3 in solution form the absorberWFS_G = mass fraction of NH3 in solution from the generator X-1 =mass of solution from the generator per unit mass of refrigerant flowFor large systems, a reasonable pressure drop between the evaporator and absorber is 1.5 psiConsider a large NH3/H2O plant operating per the schematic below: Known/given:i. Refrigeration load = 500 tonsii. Evaporator temperature (state point 10) = 41.1 Fiii. Evaporator pressure (state point 10) = 75 psiaiv. Absorber pressure (state point 11) = 73.5 psia (per rule of thumb above regarding pressure drop between the evaporator and absorber)v. Strong aqua solution temperature (state point 3) = 105 Fvi. Condenser temperature (state point 8) = 100 Fvii. Condenser and tower pressure (state point 7) = 211.9 psiaviii. Concentration split, WFS_G - WFS_A =6% by weight…
A boiler plant incorporates an economizer and air preheater, and generates steam at 80 bar and 440 ˚C with fuel of heating value 34500 kJ/kg burned at a rate of 490 kg/h. The temperature of feed water is raised from 32 ˚C to 138 ˚C in the economizer and the flue gases are cooled at the same time from 390 ˚C to 215 ˚C. The flue gases then enter the air preheater in which the temperature of combustion air is raised by 82 ˚C. A forced draught fan delivers the air to the air preheater at a pressure of 1.01 bar and a temperature of 20 ˚C with a pressure rise across the fan of 185 mm of water. The power input to the fun is 6.1 kW and it has a mechanical efficiency of 80%. Neglect heat losses and take Cp=1.01 kJ/kg.K for flue gases and 4.182 kJ/kg.k for water. After the calculation of the mass flow rate of air, gas and of the steam, calculate the efficiency of the boiler. Select one: a. 82% b. 89% c. 94% d. 85%
27 - The refrigerant R-134a enters a throttling valve as a saturated liquid at 1600 kPa and leaves at 280 kPa. Which of the following is the degree of dryness of R134a leaving the valve? a) 0.4297 B) 0.4520 NS) 0.4075 D) 0.3434 TO) 0.3530
Give an example of Exergy Destroyed During Mixing of Fluid Streams.
For the NH3/H2O cycle the following relationship give the solution flow rate per unit refrigeration rate: WFS_A * X - WFS_G(X-1) = 1 where WFS_A = mass fraction of NH3 in solution form the absorber WFS_G = mass fraction of NH3 in solution from the generator X-1 =mass of solution from the generator per unit mass of refrigerant flow For large systems, a reasonable pressure drop between the evaporator and absorber is 1.5 psi Consider a large NH3/H2O plant operating per the schematic below: Known/given: i. Refrigeration load = 500 tons ii. Evaporator temperature (state point 10) = 41.1 F iii. Evaporator pressure (state point 10) = 75 psia iv. Absorber pressure (state point 11) = 73.5 psia (per rule of thumb above regarding pressure drop between the evaporator and absorber) v. Strong aqua solution temperature (state point 3) = 105 F vi. Condenser temperature (state point 8) = 100 F vii. Condenser and tower pressure (state point 7) = 211.9 psia viii. Concentration split, WFS_G - WFS_A =6%…
13 - A fixed volume insulated tank, which was initially empty, was connected by a valve to a distribution line carrying helium gas at a temperature of 125ºC. The valve is opened first and closed when the pressure is the same as the distribution line pressure. What is the final internal energy of helium in the tank? (Internal energy of the warehouse in the final state = Enthalpy of the distribution line). (Cp=5.1926) will be taken. a) 701.0 kJ/kg B) 649.1 kJ/kg NS) 2014.7 kJ/kg D) 2118.6 kJ/kg TO) 2066.7 kJ/kg
H1. A stack gas containing 71.9% N2, 10% CO2 and 18.1% CO is passed through a turbine. This gas stream flows at 500 m3 STP/min and cools from 1000°C to 500°C. a. How much shaft work is done if the rate of heat removal from the turbine is 2000 kW? b. What was the flow rate of air (m3/s) to the combustor if the air was fed at 50°C and 6 atm? c. What is the theoretical amount (mol/s) of air required for the combustor? d. Generally excess air is used. Why?
A certain Geothermal Power Plant shows that 1,700,000 kg/hr of pressurized ground water is available at 17.5MPa and 330°C. The water will be throttled to a pressure of 1.7MPa to produce wet steam and this mixture will be passed through a water separator to remove the water droplets so that saturated steam at 1.7MPa is available at the entrance of the Turbine. Other data are as follows: Discharge Pressure of turbine = 85kPa-Vac; Turbine Efficiency = 73%. Mechanical Loss = 2% of shaft power. Generator Efficiency = 95%. Determine the following: 1.The mass flow rate, in kg/min, of steam entering the turbine. a. 153,720 b . 76,858 c. 38,430 d. 19,200 e. 9,350 2. The maximum amount of power, in kW, that the plant can generate. a. 38,430 b. 19,200 c. 76,858 d. 9,350 e. 153,720