In a steam power plant operating on ideal Rankine cycle, steam enters theturbine at 20 bar with an enthalpy of 3384 kJ/kg and an entropy of 7.127kJ/kg K. The condenser pressure is 0.1 bar. Find the cycle efficiency, Workratio and specific steam consumption in kg/kWh. Do not neglect pumpwork. You may make use of the extract of steam table given below.thgStSg(bar)(°C)kJ/kgkJ/kg20.0212.4908.81890.72.4476.3310.145.81191.832584.70.64938.1502

Given:P1=20 barh1=3384 KJ/Kgs1=7.127 KJ/Kg.KP2=0.1 bar

In a steam power plant operating on ideal Rankine cycle, steam enters turbine at 20 bar with an enthalpy of 3384 kJ/kg and an entropy of 7.12 kJ/kg K. The condenser pressure is 0.1 bar. Find the cycle efficiency, W ratio and specific steam consumption in kg/kWh. Do not neglect pump work. You may make use of the extract of steam table given below.

In a steam power plant operating on ideal Rankine cycle, steam enters turbine at 20 bar with an enthalpy of 3384 kJ/kg and an entropy of 7.12 kJ/kg K. The condenser pressure is 0.1 bar. Find the cycle efficiency, W ratio and specific steam consumption in kg/kWh. Do not neglect pump work. You may make use of the extract of steam table given below.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A Thermal power plant operates on ideal reheat type Rankine cycle with inlet of steam to high pressure turbine at 150 bar and 550OC. The dry steam at exit is being reheated at 40 bar to 550OC and supplied to low pressure turbine. Condenser works at 0.1 bar. Draw the T-s and h-s plot for the same and determine 1) quality at outlet of low pressure turbine 2) cycle efficiency 3) steam rate 4) heat rate and 5) work ratio.
IDEAL RANKINE CYCLE: In an ideal Rankine Cycle, steam at 5 MPaa and 500 o C enters the turbine and expands 300 KPaa. For 110,000 kg/hr of steam, find: a) Ideal power output of the Turbine (kW), b) Power to drive the pump (kW), c) Rate of Heat Added (kW), d) thermal efficiency of cycle and engine, e) steam rate of the cycle and engine, f) Heat Rate (PLEASE SHOW COMPLETE SOLUTION AND ENCLOSE ALL THE FINAL ANSWERS ROUNDED OFF TO THE 4TH DECIMAL)
A Rankine cycle runs with a water boiler at 4 MPa and the cycle has the highest and thelowest temperatures of 450ºC and 45ºC respectively. If the temperature difference of coolingwater in the condenser is 36ºF and m w is 1200 kg/s.Determine: 2.1 Q ADDED , KW 2.2 W PUMP, HP 2.3 W TURBINE, KW 2.4 W NET, KW 2.5 Efficiency
A steam power plant operates under a regenerative Rankine cycle. Steam at 20 MPa and 600oC enters the turbine and exhausts to a condenser pressure of 25 kPa. Some portion of the steam is extracted at 1 MPa and utilized for feedwater heating. The feedwater leaves the open heater as a saturated liquid at extraction pressure. For a boiler feed water flow rate of 150 kg/s, calculate (a) the mass flow rate of bleed steam, in kg/hr, (b) turbine power output, in MW, (c) the required power input to the pump, in kW, and (d) the plant thermal efficiency.
Subject: Thermodynamics Why Rankine cycle still being used in steam power plants instead of the Carnot cycle considering that the Carnot cycle is higher in cycle/thermal efficiency?
1.5An ideal Rankine cycle with reheat uses water as the working fluid. As shown in the figure below, the conditions at the inlet to the first turbine stage are 1600 lbf/in.2, 1200°F and the steam is reheated to a temperature of T3 = 800°F between the turbine stages at a pressure of p3 = p2 = 200 lbf/in.2 For a condenser pressure of p5 = p4 = 1 lbf/in.2, determine:(a) the quality of the steam at the second-stage turbine exit. h6≈h5+v5(p6−p5)h6≈h5+v5(p6-p5)Determine the quality of the steam at the second-stage turbine exit. x4 =(b) the cycle percent thermal efficiency.
In a Rankine Cycle , saturated liquid water at 1 bar is compressed isentropically to 150 bar. First by heating in a boiler and then by superheating at constant pressure of 150 Bar, the water substance is brought to 750 K. After Adiabatic reversible expansion in a turbine at 1 Bar, it is then cooled in a condenser to a saturated liquid. How much work is generated in the turbine? (include diagram)
Steam is the working fluid in an actual Rankine cycle. Steam enters the turbine at 8.0 MPa and 550 deg. C; and saturated liquid exits the condenser at a pressure of 0.008 MPa. The net power output of the cycle is 110 MW. The turbine and the pump each have an isentropic efficiency of 83% Illustrate and label the TS diagram and determine the cycle (a) the cycle thermal efficiency (b) the back work ratio (c)the mass flow rate of the steam, in kg/h, (d) the rate of heat transfer into the working fluid as it passes through the boiler, in MW, (e) the rate of heat transfer, from the condensing steam, as it passes through the condenser, in MW, (f) the mass flow rate of the condenser cooling water, in kg/hr., if cooling water enters the condenser at 15 deg. C and exits at 35 deg. C.
3. A 200 MW power plant operates on a simple Rankine cycle. Steam at 5.2 MPa, 400ºC expandsin a Rankine turbine to 0.036 MPa. Assume actual turbine with isentropic efficiency of 75 % forboth the compressor and expander. 3.1 Heat added in steam Generator , KW 3.2 Power loss at Turbine, KW 3.3 Actual thermal efficiency of the cycle 3.4 Mass of water in kilogram needed for an hour in the condenser if the changeof temperature for the water is 27ºF
In a reheat-regenerative steam cycle, steam enters the h.p. turbine at 80 bar, 480 °C andexpands to 7 bar. The steam is then reheated to 440 °C before entering the l.p. turbine,where it expands to the condenser pressure of 0.08 bar. Steam extracted from the h.p.turbine at 20 bar is fed to a closed feedwater heater, from which the drain at 205 °C iscascaded to an open feedwater heater through a trap. Steam extracted from the l.p. turbineat 3 bar is also fed into the open feedwater heater, from which the total flow is pumpedinto the steam generator. The net power output of the cycle is 100 MW. Assuming idealprocesses, determine (a) the cycle efficiency, and (b) the rate of steam generation in kg/h.[Ans. (a) 43%, (b) 2.8 × 105 kg/h]
PLEASE ANSWER ALL AND SHOW COMPLETE SOLUTION. 1. Steam is the working fluid in an ideal Rankine cycle. The saturated vapor enters the turbine at 8.0 MPa and saturated liquid exits the condenser at a pressure of 0.008 MPa. The net power output of the cycle is 100 MW. Determine for the cycle (a) the thermal efficiency, (b) the mass flow rate of the steam, in kg/h, (c) the rate of heat transfer, into the working fluid as it passes through the boiler, in MW, (d) the rate of heat transfer, from the condensing steam as it passes through the condenser, in MW, (e) the mass flow rate of the condenser cooling water, in kg/ h, if cooling water enters the condenser at 15 DEGREE CELCIUS and exits at 35 DEGREE CELCIUS.
The Steam Engine for a simple Rankine Cycle with super heat vapor steam power plant, drives 150 kW generator of 90% electrical efficiency. Steam rate, 6.7 kg per bhp-hr; steam pressure, 1,034.6 kPag, 55.6°C superheat; exhaust to condenser at 15.2 cm Hg abs. No feedwater heating. Motor driven boiler feed-pump. Other data are as follows: Enthalpy of steam at 1,034.6 kPag & 55.6°C sh = 2,919 kJ/kg; Enthalpy of steam at 15.2 cm Hg abs. (after isentropic expansion work) = 2,252 kJ/kg; Enthalpy of Condensate at 15.2 cm Hg abs (hf) = 252.8 kJ/kg; and Specific Volume of Condensate = 0.001019 m3/kg.Determine the unitary Feedwater pump work, in kJ/kg. Determine the Ranking Cycle Efficiency in %.Determine the Brake Thermal Efficiency of the cycle in %. Determine the Combined thermal and electrical efficiency in %.