Combustion COMBUSTION ENGINEERINGIn an air-standard Otto cycle engine, the following data were obtained: k = 1.4 ,C, = 1.0045 ,C, = 0.7175 , P1 = 103 kPa , t, = 26°C, t2 = 414°C, tz = 2527°C,kgKkg-Kt4 = 945.8°C.To be done:a. Find the compression ratio r.A. 6,5В. 7C. 7.5 D. 8.0E. None of theseb. Find the pressure at the end of the compression stroke p2.А. 1804 КРа В. 1894 КРа С. 1994 КPа D. 2004 КРаc. Find the pressure at the end of heat addition.A. 7700 kPa B. 7719 kPa C. 8019 kPa D. 8800 kPa E. None of thesed. Find the pressure at the end of the expansion stroke P4.A. 410 kPaВ. 420 kPaC. 8019 kPa D. 460 kPa E. None of thesee. Find the Heat added qa to the cycle, in kJ/kg air.A. 1615 kJ/kg C. 1555 kJ/kg E. None of theseB. 1575 kJ/kgD. 1516 kJ/kgf. Find the work of the cycle wey, in kJ/kg air.A. 866.1-kg airB. 877.1k)kg airC. 880.2- D. 900- E. None of thesekg airE. None of thesekg airPage 1 of 2g. Calculate the cycle efficiency for the cycle, in percent.A. Ncy = 52.57 % B. ncy = 56.47 % C. ney = 56.03 % D. nyy = 54.08 %h. Find the Theoretical mean effective pressure Tmen, in kPa.А. 1274 kPа В. 1174 КРа С. 1074 КРа D. 974 КРа Е. None of thesei. Solve for the per cent clearanceA. 18.18% B. 16.67% C. 14.28%D. 15.38% E. None of thesekJj. Find the entropy change for the process 2-3, inkg-K"B. -1.298 C. 1.008 D. -1.008 E. None of these

Answered: Image /qna-images/answer/144ca91e-f32d-489f-a6c1-a6c0b3f47747.jpg

In an air-standard Otto cycle engine, the following data were obtained: k = 1.4, cp = 1.0045₂ = 0.7175 P₁ = 103 kPa, t₁ = 26°C, t₂ = 414°C, t = 2527°C, kg-K t₁ = 945.8°C. To be done: a. Find the compression ratio r. A. 6.5 B. 7 C. 7.5 D. 8.0 E. None of these b. Find the pressure at the end of the compression stroke P2. A. 1804 kPa B. 1894 kPa C. 1994 kPa D. 2004 kPa c. Find the pressure at the end of heat addition. A. 7700 kPa B. 7719 kPa C. 8019 kPa D. 8800 kPa E. None of these

In an air-standard Otto cycle engine, the following data were obtained: k = 1.4, cp = 1.0045₂ = 0.7175 P₁ = 103 kPa, t₁ = 26°C, t₂ = 414°C, t = 2527°C, kg-K t₁ = 945.8°C. To be done: a. Find the compression ratio r. A. 6.5 B. 7 C. 7.5 D. 8.0 E. None of these b. Find the pressure at the end of the compression stroke P2. A. 1804 kPa B. 1894 kPa C. 1994 kPa D. 2004 kPa c. Find the pressure at the end of heat addition. A. 7700 kPa B. 7719 kPa C. 8019 kPa D. 8800 kPa E. None of these

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An Otto cycle operates on 1lb/s of air from 15 psia and 130 F at the beginning of compression. The temperature at the end of combustion is 5,000 R; compression ratio is 5.5. for hot-air standard k=1.32. find (a) T4, OR; (b)P4, psia; (c) Qr, BTU/s; (d) thermal efficiency, and (e) work net in horsepower. (Please provide complete solution and write legibly)
HANDWRITTEN:A vintage car has an engine that operates on an Otto cycle with a compression ratio of 8:1. Using the air standard assumption, the following parameters are applied: T2 = 720 K, T4 = 1890 K. Solve for the (a) percentage clearance, (b) volume displacement, (c) pressure and temperature at each corner, e) Heat added, (f) Heat rejected, and (g) efficiency. Note: Make sure to indicate a CORRECT P-V and T-S diagram
Multiple Choice. Choose the correct answer and show COMPLETEsolution. (Brayton Cycle) 18. An air standard Brayton cycle operates with compression ratio of 6 and temperatureat the start and end of heat addition are 170°C and 820°C. Find the temperature at theend of expansion.a. 261 °Cb. 83 °Cc. 400 °Cd. 990 °C
Derive an expression for the air standard efficiency of a Brayton cycle in terms of pressure ratio. An engine working on Diesel cycle has a compression ratio of 15 and fuel supply is cut off at 8% of stroke. If the engine has a relative efficiency of 50%, determine the fuel consumption per kW-hr. Assume the fuel has a calorific value of 42000 kJ/kg.
The world’s largest diesel engine has displacement of 25 m3 running at 300 RPM in a two-stroke cycle producing 100 000 hp. Assume an inlet state of 300 kPa, 300 K and a compression ratio of 20:1. a)What is the mean effective pressure? b)The flow of air to the engine?
Write legibly so i can understand 1. In an air standard dual cycle, P 1 = 101.325 kPaa and t 1 = 60.3 o C. Compression ratio is 18 and the pressure at the end of the constant volume heat addition process is 7695 kPaa. Cut-off ratio is 1.5. On the basis of 1 kg of a hot air standard with k = 1.31, find: a) P,V,T at cycle state points, b)percent clearance, c) W net (kJ), d) thermal efficiency, e) mean effective pressure (kPaa)
3. A rear mounted air-cooled SI engine has 6 cylinders, 3.375 in x 2.6 in bore and stroke respectively, acompression ratio of 8 and developed 80 BHP at 4400 rpm. It was noted that brake thermal efficiency is26 %, volumetric efficiency is 74 % and mechanical efficiency is 71 %. For the ideal cycle, conditions atthe start of compression are 14.7 psia, 140 o F.Calculate a) Percent clearance, b) P, T at the end of compression, c) Brake engine efficiency, d) massflow rate of air, e) torque (lb-ft), f) AF with Q hv = 19100 BTU/lb fuel
Provide a complete and logical solution for the problem. If linear interpolation is required in the problem, tabulated values is considered as a solution. Also, provide T-S or P-V diagrams for each problem. An ideal Otto engine, operating on the hot-air standard with k = 1.34, has a compression ratio of 5. At the beginning of compression, the volume is 6 ft3, the pressure is 13.75 psia and the temperature is 100°F. During the constant-volume heating, 340 BTU are added per cycle. Find the following: a. Percent clearance b. Temperature after heat addition c. Pressure after heat addition d. Efficiency
Thermodynamics The actual cycle of a 5T diesel engine, with a displacement of 7000 cm³ , 2,400 rpm is approximate to the theoretical cycle represented in the figure below, in which the custom rectangle has the area of the same cycle. A compression ratio is 17 and the thermal efficiency is 0.597 when 26.3% of the heat is provided isochorically. It is adopted that the active liquid has ϒ = 1.35 and R = 240J / KgK. To determine a) The values of p T and v at the main points of the cycle; b) The power of the cycle. c) Expansion work.
An ideal Otto cycle engine with 13% clearance operates on 0.227 kg/s of air; intake state is 105.90 kPa, 95.8 0C.The energy released during combustion is 115 kJ/s. For an ideal gas with k = 1.22, compute a) Pressure, Volumeand Temperature at each corner, b) W, c) e, and d) MEP.
Sketch the air-standard otto ott Diesel cycle on P-V and T-S diagrams. Two engines are to operate on Otto and diesel cycles with the following data; Maximum temperature 1400K, exhaust temperature 700K, state of air at the beginning of compression is 0.1 Mpa and 300k. Compare for 1kg/min of air for respective cycles; i) Compression ratios ii) Maximum pressures iii) Thermal efficiencies iv) Rate of work output
An ideal Diesel engine operates on 1.5 lb of air with a suction state at 14.1 psia and 100 F. The pressure at the end of compression is 475 psia and the cut -off is 6% of the stroke from head -end dead - center. Using air properties (R=53.34 ft-lbf/Ibm-R, k=1.4, Cp =.24, Cv=. 1714 Btu/lbm-R), determine compression ratio, percentage clearance, Qa, Qr, Thermal Efficiency, mean effective pressure.