In an ideal diesel cycle the pressure and the temperature at the beginning ofcompression are 98.5 kPa and 60C, respectively. The maximum pressure attendduring the cycle is 4.5MP and heat received during the cycle is 580KJ/kg. Determinea-the compression ratio b- the temperature at the end of compression b- thetemperature at the end of combustion.y-14.g=1.003U /ek (15.3:1, 721 C, 1300 C)

Answered: Image /qna-images/answer/4d87a751-765a-4ff3-9b3c-f1971b99dc75.jpg

In an ideal diesel cycle the pressure and the temperature at the beginning of compression are 98.5 kPa and 60°C, respectively. The maximum pressure attend during the cycle is 4.5MPA and heat received during the cycle is 580KJ kg. Determine a-the compression ratio b- the temperature at the end of compression b- the temperature at the end of combustion.y14g-100 /Agk (15.3:1, 721°C, 1300 C)

In an ideal diesel cycle the pressure and the temperature at the beginning of compression are 98.5 kPa and 60°C, respectively. The maximum pressure attend during the cycle is 4.5MPA and heat received during the cycle is 580KJ kg. Determine a-the compression ratio b- the temperature at the end of compression b- the temperature at the end of combustion.y14g-100 /Agk (15.3:1, 721°C, 1300 C)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

At the beginning of the compression process of air-standard Diesel cycle operating with a compression ratio of 18, the temperature is 300 K and the pressure is 0.1 MPa. The cut-off ratio for the cycle is 2 and the mass flow rate in the system is 1900 kg/hr. Cp=1.006 kJ/kg K Cv= 0.717 kJ/kg K 1) calculate the pressure after compression in kPa? 2) which formula should be used to determine the work output of the engine? 3) calculate the work output of the engine in kW?
At the beginning of the compression process of an air-standard Diesel cycle operating with a compression ratio of 18, the temperature is 300 K and the pressure is 0.1 MPa. The cut-off ratio for the cycle is 2 and mass flow rate in the system is 1900 kg/hr.cp = 1.006 kJ/kg K cv = 0.717 kJ/kg K 1. calculate the pressure after compression in kPa?Answer to 2 decimal places. 2. calculate the temperature after isentropic compression in the presentable unit?Answer to 1 decimal place.
At the beginning of the compression process of air-standard Diesel cycle operating with a compression ratio of 18, the temperature is 300 K and the pressure is 0.1 MPa. The cut-off ratio for the cycle is 2 and the mass flow rate in the system is 1900 kg/hr. Cp=1.006 kJ/kg K Cv= 0.717 kJ/kg K 1) calculate the thermal efficiency of the cycle in %? 2) which formula should be used to determine the thermal efficiency of the cycle ?
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 90 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 1950 K. The Compression Ratio is 23.24 Determine the compression ratio.
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 90 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 1950 K. Determine the compression ratio. r =
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 90 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 1950 K. Determine the thermal efficiency of the cycle in %.
12 - In the ideal Diesel cycle, the compression ratio is 30. The initial temperature of the air is 298 K and the pressure is 98 kPa. If the net work of the cycle is 875 kJ/kg, which of the following is the Average Effective Pressure? a) 932.6 kPa B) 1037.2 kPa NS) 1016.9 kPa D) 895.3 kPa TO) 982.7 kPa
An Otto cycle operating in an air standard conditions has a peak temperature of 800C. If the heat added in each cycle is equal to 350kJ/kg, determine the compression ratio of the cycle.a. 5.4004 b. 5.4005 c. 5.4006 d. 5.4007
The max temperature of an Otto cycle working under air standard conditions is 8000 degrees Celsius. Determine the compression ratio of the cycle if the heat injected in each cycle is 350kJ/kg.
The temperature at the beginning of the compression process of air-standard otto cycle with a compression ratio of 10 is 21 °C , the pressure is 101 kPa, and the mass flow rate of air in the engine is 580 kg/min. The maximum temperature during the cycle is 1300 °C. Cp= 1.006 kJ/kg K Cv= 0.717 kJ/kg K 1) which formula should be used to determine the thermal efficiency of the cycle? 2) calculate the thermal efficiency of the cycle in %?
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 100 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 2050 K. Determine a. the compression ratio. b. the cutoff ratio. c. the thermal efficiency of the cycle. d. the mean effective pressure, in kPa.
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 100 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 2050 K. Determine:(a) the compression ratio.(b) the cutoff ratio.(c) the percent thermal efficiency of the cycle.(d) the mean effective pressure, in kPa.