in an indirect evaporative system,through a tube heat exchanger, the primary air at an inlet has a tempertaure of 43 degree, the secondary air at the inlet has a temperature of 22 degrees, the effectiveness 0.8, choose any material , to find: 1- oulet temperature of primary air, 2- outlet temperature of secondary air

in an indirect evaporative system,through a tube heat exchanger, the primary air at an inlet has a tempertaure of 43 degree, the secondary air at the inlet has a temperature of 22 degrees, the effectiveness 0.8, choose any material , to find: 1- oulet temperature of primary air, 2- outlet temperature of secondary air

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter47: High-pressure, Low-pressure, And Absorption Chilled-water Systems

Section: Chapter Questions

Problem 13RQ: The subcooling temperature in a condenser can be measured by taking the difference between the A....

See similar textbooks

Similar questions

The subcooling temperature in a condenser can be measured by taking the difference between the A. suction pressure converted to temperature and the boiling refrigerant. B. boiling temperature and the condensing temperature. C. condensing temperature and the leaving-refrigerant temperature. D). condensing temperature and the entering-refrigerant temperature.
The typical difference in temperature between the cooling tower water supplied to the condenser and the out-door wet-bulb temperature is _____F.
An unfinned/mixed cross-flow heat exchager (single-pass) is used to cool down hot air from 75◦Cto50◦C. In this process, the cooling fluid’s temperature increases from 20◦Cto 45◦C. What is theNTU for this heat exchanger?
water at 366 k is transfer from storge tank to another at rate 50 m3/min .The pump supplied work at rate 2 kJ , this water pass through heat exchanger ,which give heat about 40000 kJ/min .This water delivered to second tank at distance 300 cm above the first tank. What the temperature in second tank ?
2. A concentric counterflow heat exchanger is used to cool oil by water. The oil flow rate is 0.1 kg/s and enters at 100 C. Water enters at 30 C and a flow rate of0.2 kg/s. The heat transfer area is 5.223 m2 and the overall heat transfer coefficient is 37.8 W/m2·K. Find the rate of heat transfer and exit temperatures. Data: Cp,h = 2131 J/kg·K and Cp,c = 4178 J/kg·K. [Ans.: Q = 8524 W, Tho = 60 C, and Tco = 40 C].
Define working of heat exchangers by showing flow directions for parallel and counterflow.
The oil (cp = 1 795 W-s/kg-K) from an oil-cooled electric transformer is cooled from 79.4 oC to 29.4 oC at the rate of 1 360.5 kg/h. This is done in an oil-water het exchanger that receives 2 948 kg/h of water at 15.6 Celsius. For the exchanger, U = 295 W/m2-K. Find the exit water temperature and heating area required (a) for counter flow and (b) for parallel flow.
The cooling load of a cold store is 24kW, the evaporator temperature is -10 ° C, the condenser temperature is 40 ° C. R134a is used as the refrigerant. Calculate the mass flow rate, the power consumed by the compressor, the cooling effect coefficient and coefficient according to all these data. (compressor characteristics Heating effect hik (compressor internal efficiency) = 0.75, hmk (mechanical efficiency) = 0.80, hec (electric efficiency) = 0.97 and hkk (belt pulley efficiency) = 0.95) motor
In a heat insulated heat exchanger, hot water with 200 kPa pressure and 80 ᵒC temperature, 5 kg / s flow rate, 150 kPa pressure and 5.0068 kg / s flow rate at 10 C temperature is continuously cooled at constant pressure and as the hot water comes out from the heat exchanger at 55 ᵒC. Find the outlet temperature of cold water in ᵒC? a.50 b.35 c.40 D.45 E.30
Water is used in a heat exchanger to cool 5 kg/s of air from 400 to 200 C. Calculate the minimum mass flow rate of the water if Twater =10 C.
In a single pass, cross flow heat exchanger where two fluids are not mixed, water with a temperature of 35oC, a mass flow of 1 kg / s, a specific heat capacity of 4197 J / kgK, 250oC, a mass flow of 1.5 kg / s, a specific heat capacity of 1000J / kgK. heated by hot gas. If the heat transfer area of the heat exchanger is 40 m2 and the total heat transfer coefficient is 100 W / m2K, calculate the exit temperatures of the water and hot gas from the heat exchanger using the NTU method.
A heat exchanger is heating water from 50 0 F to 160 0 F using steam on the shell at atmospheric pressure condensing at 212 0 F. If the overall U is 710 BTU/(hr 0 F ft2) and the exchange rate is 9,000,000 BTU/hr, what tube area is needed?