In April 2010, the worst oil spill ever recorded occurred when an explosion and fire on the Deepwater Horizon offshore oil-drilling rig left 11 workers dead and began releasing oil into the Gulf of Mexico. One of the attempts to contain the spill involved pumping drilling mud into the well to balance the pressure of escaping oil against a column of fluid (the mud) having a density significantly higher than those of seawater and oil.In the following problems, you may assume that seawater has a specific gravity of 1.03 and that a hypothetical subsea wellhead is 7167 ft below the surface of the Gulf. Gauge Pressure Estimate the gauge pressure (psig) in the Gulf at a depth of 7167 ft. ______psig

In April 2010, the worst oil spill ever recorded occurred when an explosion and fire on the Deepwater Horizon offshore oil-drilling rig left 11 workers dead and began releasing oil into the Gulf of Mexico. One of the attempts to contain the spill involved pumping drilling mud into the well to balance the pressure of escaping oil against a column of fluid (the mud) having a density significantly higher than those of seawater and oil.In the following problems, you may assume that seawater has a specific gravity of 1.03 and that a hypothetical subsea wellhead is 7167 ft below the surface of the Gulf. Gauge Pressure Estimate the gauge pressure (psig) in the Gulf at a depth of 7167 ft. ______psig

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.5P: Evaluate the dimensionless groups hcD/k,UD/, and cp/k for water, n-butyl alcohol, mercury, hydrogen,...

See similar textbooks

Gauge Pressure

Estimate the gauge pressure (psig) in the Gulf at a depth of 7167 ft.
______psig

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The crux of the problem asks you to compute the elastic modulus of a pancake--for this we give you numbers that we got from our own measurements of the pancakes. The last question asks you to hypothesize about which ingredients are playing the role of flour in the gluten free recipes. If you find this topic interesting, you may want to consider exploring something like this for your final project, and design an experiment to understand the difference between the normal and gluten free recipe and try to manipulate the gluten free recipe to better resemble the normal pancakes.If you choose to make the two recipes and compare them in your own kitchen, make sure you use exactly the same protocol for each recipe: In our trials, we made the batter, and then cooked on a skillet, using 1/4 cup of batter per pancake, and flipped when the edges were firm and golden, about 4-5 minutes on each side.Consider a stack of six pancakes. Each pancake is made of 1/4 cup (approximately 60 mL) of batter,…
A piece of lead (sp. Gr. 11.3) is tied to a 130 cc of cork whose specific gravity is 0.25. They float just submerged in water. what is the total volume of lead?
The human brain and spinal cord are immersed in the cerebrospinal fluid. The fluid is normally continuous between the cranial and spinal cavities and exerts a pressure of 100 to 200 mm of H2O above the prevailing atmospheric pressure. In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed, as shown in the figure below. If the fluid rises to a height of 150 mm, we write its gauge pressure as 150 mm H2O. A patient lies sideways while a surgeon tries to insert a hollow tube into his spinal cord. (a) Express this pressure in pascals, in atmospheres, and in millimeters of mercury. (The density of water is 1.00 ✕ 103 kg/m3, and the density of mercury is 13.6 ✕ 103 kg/m3.) pascals kPa…
A piece of lead (sp. Gr. 11.3) is tied to a 130 cc of cork whose specific gravity is 0.25. They float just submerged in water. What is the weight of the cork?
1. A NASA Learjet has a section of one wing instrumented with devices capable of measuring temperature and pressure at discrete points on the wing. If at one of these points, the instruments measure pressure = 10 psi and temperature = -20°F, what is the density of the air at that point?
nOn 23 January 1960, Jacques Piccard (son of the boat's designer Auguste Piccard) and US Navy Lieutenant Don Walsh achieved the goal of Project Nekton. nThe Trieste is a Swiss-designed, Italian-built deep-diving research bathyscaphe, reached a record maximum depth of 35,797 ft, in the deepest known part of the Earth's oceans, the Challenger Deep, in the Mariana Trench near Guam in the Pacific Ocean. Taking the density of seawater as 64 lbm/ft3, find the sea pressure in psig at the dive depth
(Solve the problem in a paper and upload as PDF file in the separate submission link provided, also fill the answers without the unit in the box below ) C1. Capillary rise of 3 mm is noticed when a glass tube is immersed in a container containing oil of specific gravity 0.64. The contact angle of oil is 190 and surface tension of the oil at 200C in contact with air is 0.088175 N/m. Find the following: Diameter of the glass tube in m
In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed. If the fluid rises to a height of 160 mm, we write its gauge pressure as 160 mm H2O. (a) Express this pressure in pascals, in atmospheres, and in millimeters of mercury.
In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed. If the fluid rises to a height of 160 mm, we write its gauge pressure as 160 mm H2O. a) Sometimes it is necessary to determine whether an accident victim has suffered a crushed vertebra that is blocking the flow of cerebrospinal fluid in the spinal column. In other cases, a physician may suspect that a tumor or other growth is locking the spinal column and inhibiting the flow of cerebrospinal fluid. Such conditions can be investigated by means of the Queckensted test. In this procedure the veins in the patient’s neck are compressed, to make the blood pressure rise in the brain. The increase in pressure in the blood vessels is…
Good day. I require assistance as this will help in my examination review. (Basic Aerodyn Principles) Consider air having standard sea level density is flowing through a wind tunnel. At the entrance of the wind tunnel, the velocity is 39 m/s. At the throat, the velocity is 174 m/s. Determine the density at the throat if the throat area is 39% of the area at the entrance. Provide answer in standard metric units. Round off the answer to the nearest thousandths. **Would gladly appreciate an explanation. Thank you.
Balloons are often filled with helium gas because it weighs only about one-seventh of what air weighs under identical conditions. The buoyancy force, which can be expressed as Fb = ? airgVballoon, will push the balloon upward. If the balloon has a diameter of 12 m and carries two people, 70 kg each Using appropriate software, investigate the effect of the number of people carried in the balloon on acceleration. Plot the acceleration against the number of people, and discuss the results Assume the density of air is ? =1.16kg/m3, and neglect the weight of the ropes and the cage
In the United States, electricity is sold using the SI units of kilowatt (kW) or megawatt (MW), and fuel for power generation stations is generally purchased using English units, e.g., British thermal unit (Btu), gallon (gal), and ton. An industrial power plant has an average annual load of 100 MW (electrical). If the overall thermal efficiency is 33% (based on HHV), what is the annual cost of fuel if the plant is fired with (a) natural gas, (b) No. 2 fuel oil, and (c) bituminous coal? Use the data from Tables 2.2, 2.7, and 2.13. Assume the cost of natural gas is $5/million Btu, the cost of No. 2 fuel oil is $3/gal, and the cost of bituminous coal is $60/ton (1 ton = 2000 lbm)