i need the answer quickly In the venture experiment, if the water volume of 9 L passed through the venture with a time of 43 seconds,the water manometer reading is 0.015 m and the water stagnation tube reading is H= 0.7 m, what is watervelocity (m/s) in the venture?Select one:O a 5.79649O D. 5.18453O C 4 48994O a. 6.34973O e 3.66602In Bourdon Gauge experiment, if the mass of the piston is 340 gr and mass of the platform is 173 gr, thepiston cross sectional area is 244.8x 10 m ir the absolute pressure error (E)-7398.3 pa, then what is thereading gauge pressure (pa)?Select oneOa 27966 0oOb 29956.00Oc 31966.00Od 28956.00Oe30056.00

Given:V=9 LV=9*10-3 m3t=43 secH=0.7 mh=0.015

In the venture experiment, if the water volume of 9 L passed through the venture with a time of 43 seconds, the water manometer reading is 0.015 m and the water stagnation tube reading is H 0.7 m, what is water velocity (m/s) in the venture? Select one: O a 5.79649 O D.5.18453 OC 448994 O a. 6.34973 O e 3 66602

In the venture experiment, if the water volume of 9 L passed through the venture with a time of 43 seconds, the water manometer reading is 0.015 m and the water stagnation tube reading is H 0.7 m, what is water velocity (m/s) in the venture? Select one: O a 5.79649 O D.5.18453 OC 448994 O a. 6.34973 O e 3 66602

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Piston A has a cross-section of 1,200 cm^2 while that of piston B is 950 cm^2 with the latter higher than piston A by 1.75 m. If the intervening passages are filled with oil (s= 0.8), what is the difference in pressure between A and B?
If a jet is inclined upward 30O from the horizontal, what must be itsvelocity to reach over a 3-m wall at a horizontal distance of 18 m,neglecting friction?
Assume an ideal fluid with mass density of 900kg/cu.m. The pressure and velocity at section 1 are 100kPa and 10 m/s, respectively. The velocity at section 2is 20 m/s. (a) Determine the reading on the manometer.(b) If the downstream piezometer was replaced with aPitot tube, what would be the manometer reading?Comment on the practicality of these arrangements.
. Indiana Jones needs to ascend a high-rise building. There is a large hose filled with pressurized water hanging down from the building top. He builds a square platform and mounts four 4-cm-diamter nozzles pointing down at each corner. By connecting hose branches, a water jet can be produced from each nozzle. Jones, the platform, and the nozzles have a combined mass of 150 kg. Determine the minimum water jet velocity needed to raise the system.
In cold climates, water pipes may freeze and burst if proper precautions are not taken. In such an occurrence, the exposed part of a pipe on the ground ruptures, and water shoots up to 55 m. Estimate the gage pressure of water in the pipe. State your assumptions and discuss if the actual pressure is more or less than the value you predicted
Knowing that a U-tube contains water, what will be the difference between the water levels in each of its branches, if we blow air at a speed of 15 m / s over one of these branches, tangent to its opening?
A pipe whose axis is horizontal, is full of water in motion. At a section A, the velocity of water is recorded as 54000dm/hrandd the pressure is equilavent tp 14.07m of water. if the pipe tapers gradually from 150mm diameter to A to 100mm diameter at B. determine the preesure at B.
An airplane is flying at an altitude of 16,000 m. Determine its speed in km/h if the GAGE pressure at the stagnation point on the nose of the plane is 830 Pa. Air density: 0.166 kg/m^3. Express your answer to the nearest whole number in km/h.
A vertical cylindrical container contains 5840 gallons of gasoline and is 1.53 m in radius. Due to evaporation within the tank, the pressure on the top of the fluid is 2.5 times normal atmospheric pressure. The density of gasoline is 737 kg/m3. a. What is the pressure at the bottom of the tank? b. If a nozzle at the bottom of the tank is used to let fuel out, with what velocity would the gasoline exit the hole? c. If a nozzle at the bottom of the tank is used to let fuel out, what volume flow rate will result if the diameter of the hole is 1.2 cm? d. At what initial rate will the height of the fuel level in the tank drop as fuel is removed?
two vertical parallel glass plates 0.1 mm apart are partially immersed in water. Considering that the water does not reach the upper edges of the sheets and that the liquid completely wets the glass, determine: a) the height that rises in the flat capillary, b) the attractive force between the plates. Consider the width of the sheet l=12cm and density y=72.8*10^-3 N/m
An unknown gas is flowing through a venturi meter whose diametersas shown. Gage pressures are measured 12.2 psia at the entranceand 11.8 psia at the throat. Take the density to be 0.105 lb/ft3.Determine the following: a) Neglecting friction, the volume flow rate of air b) If the pressure gauge is replaced with a manometer withmercury as its medium (SG=13.6), what will be the height ofthe mercury in inches? Draw the most possible orientationof the manometer and its fluid height.
To what head of air (R = 287 J · kg−1·K−1) at an absolutepressure of 101.3kPa andtemperature of 15◦C is a pressureof 75 mm of water equivalent?