Initially, two resistors R1 and R2 are connected in series. The connection of the terminals of R1 and of R2 are labeled 'b.' The other terminal of R1 is labeled 'a,' while the other terminal of R2 is labeled 'c.' After some time, 'a' and 'c' are connected to each other. Which is definitely true regarding the resistance across 'b' and 'c' in the old and new circuits? O The old resistance across 'b' and 'c' is equal to R2, while the new resistance across 'b' and 'c' is less than R2. O The old resistance across 'b' and 'c' is the sum of R1 and R2, while the new resistance across 'b' and 'c' is less than R1. O The old resistance across 'b' and 'c' is the sum of R1 and R2, while the new resistance across 'b' and 'c' is less than R2. O The old resistance across 'b' and 'c' is equal to R2, while the new resistance across 'b' and 'c' is equal to R1.

Initially, two resistors R1 and R2 are connected in series. The connection of the terminals of R1 and of R2 are labeled 'b.' The other terminal of R1 is labeled 'a,' while the other terminal of R2 is labeled 'c.' After some time, 'a' and 'c' are connected to each other. Which is definitely true regarding the resistance across 'b' and 'c' in the old and new circuits? O The old resistance across 'b' and 'c' is equal to R2, while the new resistance across 'b' and 'c' is less than R2. O The old resistance across 'b' and 'c' is the sum of R1 and R2, while the new resistance across 'b' and 'c' is less than R1. O The old resistance across 'b' and 'c' is the sum of R1 and R2, while the new resistance across 'b' and 'c' is less than R2. O The old resistance across 'b' and 'c' is equal to R2, while the new resistance across 'b' and 'c' is equal to R1.

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter29: Direct Current (dc) Circuits

Section: Chapter Questions

Problem 64PQ: Ralph has three resistors, R1, R2, and R3, connected in series. When connected to an ideal emf...

See similar textbooks

Similar questions

An automobile starter motor has an equivalent resistance of 0.0500 and is supplied by a 12.0-V battery with a 0.0100- internal resistance, (a) What is thecurrent to the motor? (b) What voltage is applied to it? (c) What power is supplied to the motor? (d) Repeat these calculations for when the battery connections are corroded and add 0.0900 to the circuit. (Significant problems are caused by even small amounts of unwanted resistance in low-voltage, high-current applications.)
A student makes a homemade resistor from a graphite pencil 5.00 cm long, where the graphite is 0.05 mm indiameter. The resistivity of the graphite is =1.38102/m . The homemade resistor is place inseries with a switch, a 10.00-mF capacitor and a 0.50-V power source, (a) What is the BC time constant of the circuit? (b) What is the potential drop across the pencil 1.00 s after the switch is closed?
A 500 resistor, an uncharged 1.50F capacitor,and a 6.16-V emf are connected in series, (a) What is the initial current? (b) What is the RC time constant? (c) What is the current after one time constant? (d) What is the voltage on the capacitor after one time constant?
Ralph has three resistors, R1, R2, and R3, connected in series. When connected to an ideal emf source E1, current I1 flows through the resistors. a. If the resistors are instead connected to a second source with E2=2E1, what is the new current through the resistors in terms of the first current? b. Show that, if each resistance is doubled and the resistors are connected in series to the second emf source, the current through the resistors is equal to I1.
A flashing lamp in a Christmas earring is based on an RC discharge of a capacitor through its resistance. The effective duration of the flash is 0.250 s, during which it produces an average 0.500 W from an average 3.00 V. (a) What energy does it dissipate? (b) How much charge moves through the lamp? (c) Find the capacitance, (d) What is the resistance of the lamp? (Since average values are given for some quantities, the shape of the pulse profile is not needed.)
Consider the circuit shown in Figure P28.21 on page 860. (a) Find the voltage across the 3.00-0 resistor, (b) Find the current in the 3.00-12 resistor.
In the circuit shown at the right, RA is identical to RC, and RB is twice A and C. Ra = Rc = 1/2Rb The current through each resistor is labeled i. Let the potential drop across resistor A be called deltaVA and so on. The battery provides an EMF = V0. ANSWER WITH THE CHANGE WHERE EVERYTHING IS NOW EQUAL TO EACH OTHER* Which of the following must be true of the currents in the circuit? iA = iB only iA = iC only iA = iB = iC iA = iB + iC iA = iB - iC None of these What is the relationship between ib and ic? iB = ⅓ iC iB = ½ iC iB = iC iB = 2 iC iB = 3 iC None of these Which of the following are true about the magnitudes of the potential differences in the circuit? Select all that apply VA = VB VB = VC VA = V0 V0 = VB + VC V0 = VA + VB V0 = VA + VC Which of the following is the correct relationship between deltaVA and deltaV0. VA = V0 VA = 1/2 V0 VA = 1/3 V0 VA = 2/3 V0 VA = 3/5 V0
The figure below shows a capacitor, with capacitance C = 35.0 µF, and a resistor, with resistance R, = 57.5 kΩ, connected in series to a battery, with = 31.0 V.The circuit has a switch, which is initially open. a) What is the circuit's time constant (in s)? b)After the switch is closed for one time constant, how much charge (in C) is on the capacitor?
Let the voltage output of the battery and resistances in the parallel connection in be the same as the previously considered series connection: V = 12.0 V , R1 = 1.00 Ω , R2 = 6.00 Ω , and R3 = 13.0 Ω . (a) What is the total resistance?(b) Find the total current. (c) Calculate the currents in each resistor, and show these add to equal the total current output of the source.(d) Calculate the power dissipated by each resistor. (e) Find the power output of the source, and show that it equals the total power dissipated by the resistors.
Consider the following circuit of three resistors (R1, R2, and R3), with batteries that have emfs ℰ1 = 10.5 V and ℰ2 = 42.5 V, and internal resistances r1 and r2.Randomized Variablesℰ1 = 10.5 Vℰ2 = 42.5 V Part (a) Find the current I1, in amps. Part (b) Find the current I2, in amps. Part (c) Find the current I3 in amps.
In the circuit shown in figure 1, epsilon is equal to 41.0 V, R1= 4 ohms, R2= 6 ohms, and R3= 3 ohms. (A) what is the potential difference Vab between points a and b when the switch S is open? (B) for the 4 ohm resistor, calculate the current through the resistor with S open. (C) for the 6 ohm resistor, calculate the current through the resistor with S open. (D) for the 3 ohm resistor calculate the current through the resistor with S open. (E) what is the potential difference Vab between points a and b when the switch S is closed? (F) for the 4 ohm resistor calculate the current through the resistor with S closed. (G) for the 6 ohm resistor calculate the current through the resistor with S closed (H) for the 3 ohm resistor calculate the current through the resistor with S closed. (I) for each resistor, does the current increase or decrease when S is closed?
Three resistors R1 = 1.00 Ω, R2 = 2.00 Ω, and R3 = 2.00 Ω, are connected in parallel. The parallel connection is attached to a V = 3.00 V voltage source. (a) What is the equivalent resistance? (b) Find the current supplied by the source to the parallel circuit. (c) Calculate the currents in each resistor and show that these add together to equal the current output of the source. (d) Calculate the power dissipated by each resistor. (e) Find the power output of the source and show that it equals the total power dissipated by the resistors.