please solve quickly It is desired to obtain SSB signal in Single Sidebandmodulation by applying the filtering method.Thewbaseband beacon is band limited between 500 Hz andww1000 Hz and the beacon willbe transmitted at 100 MHz.Explain the generation of the output signal using thenecessary steps, step by step and by drawing itsspectra. Make the necessary calculations.wwwwwww wwww

Answered: Image /qna-images/answer/836ba08b-4f53-433f-994c-0d3585806585.jpg

It is desired to obtain SSB signal in Single Sideband modulation by applying the filtering method . The baseband beacon is band limited between 500 Hz and 1000 Hz and the beacon will wwww be transmitted at 100 MHz. Explain the generation of the output signal using the necessary steps, step by step and by drawing its spectra. Make the necessary calculations. ww w www w www ww w www w www

It is desired to obtain SSB signal in Single Sideband modulation by applying the filtering method . The baseband beacon is band limited between 500 Hz and 1000 Hz and the beacon will wwww be transmitted at 100 MHz. Explain the generation of the output signal using the necessary steps, step by step and by drawing its spectra. Make the necessary calculations. ww w www w www ww w www w www

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

pls list the step by handwritinga) Sketch the spectrum of g(t)?b) Sketch the spectrum at point (a) of the conversion system?c) What should the parameter w0 be relative to wc?d) What should be the value of passband gain A?
-MCQ- FM modulator is used to transmit a cosine message signal with 4V amplitude and 20Hz frequency. The frequency deviation constant kf = 25 Hz/V, the carrier is a cosine sign with an amplitude of 10V and a frequency of 2000Hz. The FM modulated signal is passed through a bandpass filter and 90% of the power of the modulated signal remains. What is the bandwidth of the FM modulated signal in this case? a) 240hz b) 20hz c) 100hz d)200hz
5. Why must modulated signals be demodulated?A. To recover the original intelligenceB. To improve the spectral efficiency of digital transmissionsC. To enable implementation of advanced featuresD. To produce one or more significant sideband pairs
For an FM modulator with a modulation index mf = 1, a modulating signalVm(t) = Vm sin(2π1000t) and unmodulated carrier Vc(t) = 10 sin(2π500kt),determinea) Number of sets of significant sidebandb) Their amplitudec) Then draw the frequency spectrum showing their relative amplitudesd) Determine the unmodulated carrier power for the FM modulator(assume a load resistance RL = 50 Ω)e) Determine the power in the modulated carrier and each side frequency,and sketch the power spectrum for the modulated wave.
fi(t) is instantaneous frequency. a) Find fc, fm, kf, β ? b)Write the basic euqation of modulated FM signal?
A 10 MHz TXCO is driving a receiver’s front end and has a frequency deviation of 4 ppm. It drives a direct down conversion RF front-end mixing the L2 frequency. What is the frequency offset at baseband due to the TXCO?
What is true regarding an information signal viewed in the timeand/or frequencydomains. a. the bandwidth of a signal can only be viewed in the time domain b. signal bandwidth can be viewed in the frequency domain c. signal amplitude can only be viewed in the time domain d. there are no true statements 2. Select the correct statement(s) regarding baseband signal modulation. a. modulation involves the mixing of a baseband signal with a carrier to produce a modulated carrier (passband) signal b. the modulation index gives us information regarding the quality of the modulated carrier signal c. FM and PM modulation techniques are categorized as “angular modulation”, while AM is not considered an “angular modulation technique d. all statements are correct
- An AM signal has a carrier of 10MHz and modulating signal of 10kHz. It has a modulation index of 0.7. Write its expression an calculate power efficiency?
After an analog signal is sampled at 15 kHz, it is converted into digital form by quantitating at 64 levels. Since unipolar rectangular pulses with 50% occupancy-void ratio are used to transmit the signal from the baseband, what is the required bandwidth for transmission?
1.Select the correct statement(s) regarding frequency modulation (FM) bandwidth. a. the more the carrier frequency is allowed to change frequencies (Δf), the smaller the modulated signal bandwidth b. the larger the FM index, β, the larger the modulated signal bandwidth c. as you increase kvco, you decrease modulated signal bandwidth d. all statements are correct 2. Select the correct statement(s) regarding baseband signal modulation. a. with modulation, a baseband signal can be moved to a higher frequency thus preventing baseband signal interference b. modulation techniques are only required for analog information signals, since digital signals are represented by discrete logical values of “1” and “0” c. modulation eliminates the baseband signal’s frequency bandwidth, thus enabling greater efficiencies when transmitting a modulated carrier signal d. all statements are correct 3. A…
How many channels are available in the 2.4 GHz band? List all the channels. What is the channelbandwidth?
In an AM signal that is 100 percent modulated, what maximum voltage value is present in each sideband?show solution