Large amplitude of vibration is experienced when an engine having mass (1500 + 2) kgoperates at a speed of 1500 rpm. An absorber having stiffness k;equal to 1500 N/m and massm; is attached to the primary system to absorb the vibration. Find:The magnitude of the mass of the absorber.ii.i.The natural frequencies of the system after the addition of the absorber.The values of the stiffness k; and mass m; of the absorber in order to have the naturalfrequencies of the two degrees of freedom system 15% away from the forcingfrequency.

A spring-mass damper system consists of mass nodes connected via springs and dampers arranged in a…

Large amplitude of vibration is experienced when an engine having mass (1500 + 2) kg operates at a speed of 1500 pm. An absorber having stiffness kzequal to 1500 N/m and mass m; is attached to the primary system to absorb the vibration. Find: i. The magnitude of the mass of the absorber. ii. The natural frequencies of the system after the addition of the absorber. ii. The values of the stiffness k; and mass m; of the absorber in order to have the natural frequencies of the two degrees of freedom system 15% away from the forcing frequency.

Large amplitude of vibration is experienced when an engine having mass (1500 + 2) kg operates at a speed of 1500 pm. An absorber having stiffness kzequal to 1500 N/m and mass m; is attached to the primary system to absorb the vibration. Find: i. The magnitude of the mass of the absorber. ii. The natural frequencies of the system after the addition of the absorber. ii. The values of the stiffness k; and mass m; of the absorber in order to have the natural frequencies of the two degrees of freedom system 15% away from the forcing frequency.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A block of mass m hangs from a spring with a spring constant k. The block is initially held so that the spring is unstretched. If the natural circular frequency of the system is 10 radians/sec, how many cycles of vibration will the block experience in five seconds after it is released?
A motor that turns at 12,000 rpm is suspended from above by a single spring to isolate the building from its vibration. If the natural frequency of the system is to be one fourth of the vibration frequency, by how many centimeters should the spring extend be-yond its unloaded length when the motor is hung on it?
A reciprocating compressor of mass 20 Kg runs at a constant speed of 3000 rpm. After installation the forcing frequency is found to be too closer to the natural frequency of the system. Design a dynamic vibration absorber such that (a) the natural frequency of the main system is equal to that of the absorber and (b) the ratio of the operating frequency to the natural frequency is 0.75.
A spring-mass system with m = 0.5 kg and k = 10,000 N/m with negligible damping, is used as a vibration pickup. When mounted on a structure vibrating with an amplitude of 4 mm, the total displacement of the mass of the pickup is observed to be 12 mm. Find the frequency of the vibrating structure.
1. Explain_why_the_natural_frequency_measurements_should_better_reflect_the_system’s_true_undamped natural_frequency_(and_therefore_correlate_better_with_calculated_values)_than_the_frequency_of_oscillation measurements. 2. For_a Linear Spring-Mass System, Torsional Spring-Mass System, and Simple Pendulum System: identify_the_necessary_measurements_required_to_identify_the_natural_frequency_and the damping_ratio_for_the_linear_SMD_and_the_simple_pendulum.
The bracket ABC, as shown in Fig 6, is of negligible weight. What is the natural frequency of vibration of the weight W for the small amplitude of rotational motion θ? Assume that the springs are unstretched when the arm AB is vertical as shown.
Two masses m1 and m2 each connected by two springs of stiffness k, are connected by a rigid massless horizontal rod of length l as shown in Fig. 5.22. (a) Derive the equations of motion of the system in terms of the vertical displacement of the C.G. of the system, x(t), and the rotation about the C.G. of the system, θ(t) (b) Find the natural frequencies of vibration of the system for m1=50 kg, m2=200 kg and k = 1000 N/m.
(a) A mass suspended from a helical spring of stiffness s, is displaced by a distance x from its equilibrium position and allowed to vibrate. Show that the motion is simple harmonic. (b) A vertical helical spring having a stiffness of 1540 N/m is clamped at its upper end and carries a mass of 20 kg attached to the lower end. The mass is displaced vertically through a distance of 120 mm and released. Find : 1. Frequency of oscillation ; 2. Maximum velocity reached ; 3. Maximum acceleration; and 4. Maximum value of the inertia force on the mass. (c) A machine of mass 75 kg is mounted on springs and is fitted with a dashpot to damp out vibrations. There are three springs each of stiffness 10 N/mm and it is found that the amplitude of vibration diminishes from 38.4 mm to 6.4 mm in two complete oscillations. Assuming that the damping force varies as the velocity, determine : 1. the resistance of the dashpot at unit velocity ; 2. the ratio of the frequency of the damped vibration to the…
A body of mass m is connected to a spring of stiffness "k". It has been observed that the natural vibration period of this system in free vibration is 0.35 seconds. The period increases by 10% when an additional 2lb weight is added to the mass. Accordingly, determine the mass and stiffness values in the initial system.
A weight of 15N is vertical suspended by a spring of stiffness k=2N/mm determine natural frequency of free vibration of the weight
vibrating body with viscous damping makes 10 complete oscillations per second, and in 50 cycles diminishes to 20 percent. Determine the damped natural frequency, logarithmic decrement and the damping ratio.
for the system shown determine the natural frequency and the damping factor