Vipretion Mks): A vibrating system consists of a mass of 17.5 kg, a spring of stiffnessFiQ535.0 N/cm, and a dashpot with a damping coefficient of 0.70 N/cm/s. Determine (a) the2.324c =8-27FITdamping factor; (b) the natural frequency of damping oscillation, (c) the logarithmic244111552decrement, and (d) the ratio of any two consecutive amplitudes.4.7W=2TFB217.

As per our guidelines we are supposed to solve only 3 subparts if multiple subparts are asked.…

m ks): A vibrating system consists of a mass of 17.5 kg, a spring of stiffness C Q5 35.0 N/cm, and a dashpot with a damping coefficient of 0.70 N/cm/s. Determine (a) the 2.82 Ce= F-- 8-23 damping factor; (b) the natural frequency of damping oscillation, (c) the logarithmic 1141 11552 decrement, and (d) the ratio of any two consecutive amplitudes. 21.7

m ks): A vibrating system consists of a mass of 17.5 kg, a spring of stiffness C Q5 35.0 N/cm, and a dashpot with a damping coefficient of 0.70 N/cm/s. Determine (a) the 2.82 Ce= F-- 8-23 damping factor; (b) the natural frequency of damping oscillation, (c) the logarithmic 1141 11552 decrement, and (d) the ratio of any two consecutive amplitudes. 21.7

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A single degree of freedom mass-spring-damper system is subject to vibration under the influence of a harmonic force. On my site, it is given as m=2 kg, k=800 N/m, c=64 Ns/m. The amplitude of the harmonic force is F0=256 N and its frequency is w= 20 rad/s. Answer the questions in options a, b, and c according to the given information. 1) Calculate the damping ratio of the system (ξ) a.1 b.0.7 c.0.9 d.0.8 2)Calculate the magnification factor (M) of the system. a.0.86 b.1.25 c.0.312 D.0.625 3-) Calculate the maximum vibration amplitude (X) (meters). a.0.2 b.0.1 c.0.4 D.0.3
mass-spring-damper system with one degree of freedom is exposed to vibration under the influence of a harmonic force. In my system, it is given as m=2 kg, k=800 N/m, c=64 Ns/m. The amplitude of the harmonic force is Fo=256 N and its frequency is w= 20 rad/s. Answer the questions in options a, b, and c according to the given information. a)a-)Calculate the damping ratio of the system b)Calculate the magnification factor (M) of the system C)Calculate the maximum vibration amplitude (X) (meters
A vibrometer with mass 0.86 kg and damping ratio ζ 0.62 is designed to measure vibration in the frequency range ωb = 34.8-84.7 rad/sec. Chose the appropriate stiffness from the given values to guarantee the maximum error will not exceed 2% Note:ZY=r2(1−r2)2+(2rζ)2√ a. 115 N/m b. 367 N/m c. 85 N/m d. 2173 N/m e. 680 N/m
A spring-mass-damper system oscillating about the horizontal surface is subjected to anexternal force of F = 300 sin (6)(t), where 300 is in Newtons and 6 is in radians per second. Thesystem has a mass 90 [kg], a damping coefficient of 78 [N ⋅ s/m] and a spring constant of300 [N⁄m]. The system is both given an initial displacement of 1.2 [m] and an initial velocity of 1.4[m⁄s].a. Using Method of Undetermined Coefficients, determine the particular solution for thedisplacement function.b. Determine the unknown coefficients for the homogeneous solution using the initialconditions (Note: the external force already works at t = 0).c. Determine the position, velocity, and acceleration of the system after 10 seconds.
A machine is represented as a single degree of freedom spring-mass-damper system. The machine has a total mass of (100 +01) kg, an out-of-balance mass 0.125 kg, eccentricity of 0.01 m, coefficient of damping (100 + 01) N/ (m/sec), and spring stiffness (1000 + 01) N/m. The rotational speed of the machine is3000 rpm. Determine the maximum amplitude of vibration due to out-of-balance. Suggest a method for the control of vibration caused due to out-of-balance.
The amplitude of vibration of a single degree of freedom spring-mass-damper system is observed to reduce to 15% of its initial value after 5 cycles. Spring stiffness equals (1500 + 01) N/m and mass equals (7.5 + 01) kg. Determine: The undamped natural frequency; The damped natural frequency; The logarithmic decrement; The damping ratio; and The coefficient of damping.
The amplitude of vibration of a single degree of freedom spring-mass-damper system is observed to reduce to 15 % of its initial value after 5 cycles. Spring stiffness equals (1500 + 21) N/m and mass equals (7.5 + 21) kg. Determine: • The undamped natural frequency; • The damped natural frequency; • The logarithmic decrement; • The damping ratio; and • The coefficient of damping.
PART OF MECHANICAL VIBRATIONS A viscously damped single degree of freedom mass–spring system has a massm of 2 kg, a spring coefficient k of 2000 N/m, and a damping constant c of5 N · s/m. Determine (a) the damping factor ξ , (b) the natural frequency ω,(c) the damped natural frequency ωd, and (d) the spring coefficient needed toobtain critically damped system.
Vibrations Engineering: Mass = 10 kilogramsSpring constant = 400 Newtons per meterPeriodic Force = 6 KilonewtonsForcing Frequency = 5 radians per secondDamping coefficient = 200 Newton second per meter Calculate: (Express the final answer in 4 significant digits) -the critical damping in Newton second per meter -the damping factor
A machine is represented as a single degree of freedom spring-mass-damper system. The machine has a total mass of (109)kg, an out-of-balance mass 0.125 kg, eccentricity of 0.01 m, coefficient of damping (109)N/ (m/sec), and spring stiffness (1009) N/m. The rotational speed of the machine is 3000 rpm. Determine the maximum amplitude of vibration due to out-of-balance. Suggest a method for the control of vibration caused due to out-of-balance.
A mass-spring system is driven by the external force g(t) = 2 sin3t + 10 cos 3t. The mass equals 1, the spring constant equals 5, and the damping coefficient equals 2. If the mass is initially located at y (0) =-1, with initial velocity y' (0) = 5, find its equation of motion to find y (1). Round up the answer to the second decimal place point.
A spring-mass system with m = 0.5 kg and k = 10,000 N/m, with negligible damping, is used as a vibration pickup. When mounted on a structure vibrating with an amplitude of 4 mm, the total displacement of the mass of the pickup is observed to be 12 mm. Find the frequency of the vibrating structure.