alfa NO 30% D1 10:24 PM M Question 2 Not yet answered Marked out of 15.00 P Flag question If an isotropic material has a shear modulus of 27 Gpa and a Poisson's ratio of 0.42, calculate its Young's modulus. Select one: E = 60 Gpa E = 300 Gpa E = 77 Gpa E = 450 Gpa E = 30 Gpa Question Netue O II
Q: Young's modulus of elasticity and Poisson's ratio of a material are 1.25 × 105 MPa and 0.34…
A: As stated in the question, Young's modulus of the material = E = 1.25 x 105 MPa Poisson's ratio = μ…
Q: The graph shown below shows the Modulus of Elasticity (E) of different materials with respect to…
A: given; (a) which material is the most ductile with increasing temperature? (b) which material is the…
Q: A brass rod 20 mm diameter was su jected to a tensile load of 40 kN. The extension of the rod was…
A: This question is related to the hook's law "it states that the stress generated in the bar is…
Q: A material has a young's modulus of 1.25 × 10³ N/mm² and a poisson's ratio of 0.25. The bulk modulus…
A: As given in question, Young's modulus of material = E = 1.25 x 105 N/mm2 Poisson's ratio = μ = 0.25…
Q: If an isotropic material has a shear modulus of 21 Gpa and a Poisson's ratio of 0.4, calculate its…
A: The relation between Young's modulus, shear modulus, and Poisson's ratio is given as: E = 2G (1+μ) E…
Q: The Young's modulus of elasticity of a material is 2.5 times its modulus of rigidity. The Posson's…
A: The given relationship is
Q: A cylindrical specimen of some metal alloy 9.0 mm (0.3543 in.) in diameter is stressed elastically…
A: The normal stress in the specimen can be determined as,
Q: given material has a modulus of elasticity E= 250 GPa and shear modulus G= 83.5 GPa, what is the…
A:
Q: length (lo)-2.0 in.): Load (lb)) 0.0 Al (in) 0.0 3000 0.00167 from a standard 0.505-in. 6000 7500…
A:
Q: 6.24 A cylindrical rod 120 mm long and having a O diameter of 15.0 mm is to be deformed using a…
A:
Q: A copper rod of 50mm diameter is surrounded by a steel tube of 100mm external diameter, the ends…
A:
Q: An 18 coils helical spring having a load of 100kg. The modulus of elasticity in shear of spring is…
A:
Q: If an isotropic material has a shear modulus of 21 Gpa and a Poisson's ratio of 0.4, calculate its…
A:
Q: The % of error between a theoretical shear modulus of GPa and an experimental modulus of rigidity of…
A: Option d is correct.
Q: 1. Determine which listed material below is the best candidate for a cylindrical rod of 200mm and…
A: given data- load applied = 55000 N length of the rod L = 200 mm dia of the rod = 20 mm allowable…
Q: If an isotropic material has a shear modulus of 30 Gpa and a Poisson's ratio of 0.34, calculate its…
A:
Q: An aluminum alloy bar of square cross Stress (MPa) Strain section (13 mm x 13 mm) is loaded in 55…
A: As all the data points are not given so I have taken some approximation while calculations.
Q: If an isotropic material has a shear modulus of 27 Gpa and a Poisson's ratio of 0.42, calculate its…
A:
Q: When installed, bar AB had negligible axial stress. When the bar's temperature is 124°F the axial…
A: Given : A bar AB had negligible stress axial stress when installed . When bar temperature is…
Q: Data taken from a stress-strain test for a ceramic are given in the table. The curve is linear…
A:
Q: 15 mm diameter shaft rotates in long fixed bearings 60 cm apart. A rotor of mass 20 kg is mounted at…
A: Given: The diameter of shaft, d = 15 mm The length of shaft, L = 60 cm The mass of rotor, m = 20 kg…
Q: A 25 ft long solid steel rod is subjected to a load of 10,000 Ib. This load causes the rod to…
A: Data given - L = 25 ft = 25 × 12 P = 10000 lb ∆L = 0.477 in E = 30 × 106 psi
Q: 15. Here is shown a plot of the tensile stress-strain curve for some material. 600 500 MPa (a) What…
A:
Q: The stress-strain data from a tensile test on a cast-iron specimen are € (10-3) 0 0.20 0.44 0.80 1.0…
A: Modulus of elasticity: The ratio of the normal stress σ to the longitudinal strain ε is known as…
Q: See the set of bars for made of a material that has a yield strength of 350 MPa, determine the…
A:
Q: 1) Material properties labelled A, B, C and D 2) How do you detemine the material's Young's modulus?…
A: Q1 - A- Proportional Limit B- Elastic Limit C- Ultimate Stress D- Fracture point Q2- Young's Modulus…
Q: 20 ft of air at 30 psia is compressed to3.50ft, isothermally. Find the bulk modulus of elasticity.…
A: Given data: V1=20 ft^3V2=3.5 ft3P1=30 psia Need to determine the bulk modulus of elasticity.
Q: A rope 3.5 mm² breaks when a load of 50 kN is applied to it. Estimate the diameter of the same rope…
A:
Q: Please answer both 1 and 2 as they relate to eachother. thank you in advance
A: Write the properties of 1040 steel.
Q: 3. For a steel alloy, the stress-strain behaviour is shown below. Determine the modulus of…
A: To find: The modulus of elasticity, proportional limit, yield strength at 0.002 and maximum…
Q: Find the equivalent stresses at Points 1 and 2 of the element with given geometry and loading…
A: Given, Shaft diameter, d=20 mm=0.020 m Shaft length, L=120 mm=0.12 m F1=750 N F2=3000 N Torsion,…
Q: A cylindrical rod of steel (E = 207 GPa) having a yield strength of 45,000 psi is to be subjected to…
A:
Q: A tendon tissue 100 mm long and having a square cross section 20 mm on an edge is pulled in tension…
A:
Q: Can you find the total deformation (mm) and strain energy values (J) at A, B, C, D,E? Shear Modulus;…
A: To find: The total deformation and strain energy values at A, B, C, D and E. Given: The shear…
Q: Young's modulus of elasticity and Poisson's ratio of a material are 1.25 × 10^5 MPa and 0.34…
A: Given data: E=1.25×105 MPaμ=0.34 Need to determine the modulus of rigidity of the material.
Q: 1 A 12.5 mm diameter steel rod is pinned between two rigid walls. The rod is initially unstressed.…
A:
Q: The ratio of modulus of rigidity to bulk modulus for a Poisson's ratio of 0.25 would be: (а) 2/3 (с)…
A: Given, Poisson's ratio = μ = 0.25 From the relation between Young's modulus and Modulus of…
Q: Lo do A solid cylindrical bar is subjected to tensile test. The initial diameter of the bar is 60…
A:
Q: Shear Stress Vs Shear Strain on Brass E 250.00 Shear Strain (y) Shear Stress () 0000'0 0.0082 0.0164…
A: following is the answer to the above problem-
Q: A stranded steel cable with known cross section and modulus of elasticity supports a 950 lb gin…
A: Given data as per question weight of pole =950 lb A = 0.11 in2 V =30 fpm v=30×1260=6 inschange in…
Q: Which among the metals below is the most elastic? Rank them from least to most elastic. Why is steel…
A: Elastic modulus of a material is defined as the proportionality constant between the stress and…
Q: A cable is made of two strands of different materials, A and B, and cross sections as follows: For…
A:
Q: Q-1: A steel bar 1AA mm long and having a square cross section 20 mm (0.8 in.) on an edge is pulled…
A: Permissible stress is stress that is produced due to pressure or forces that do not exceed the…
Q: 1 J A cylindrical specimen of steel having a diameter of 14.36 mm and length of 209 mm is deformed…
A:
Q: 9. A solid circular rod that is 600 mm long and 20 mm in diameter is subjected to an axial force of…
A:
Q: A tensile test is conducted on a mild steel bar. The following data was obtained from the test :…
A: Given that, Diameter of steel bar, d=3 cm,Gauge length of the bare, L=20 cm,Load at elastic limit,…
Q: Bar, A: Length, LA Diameter, da Poisson's Ratio Bar, B: Length, LB Diameter, dB Poisson's Ratio =…
A: When the temperature of the bar which is restricted to expand, is increased stress induces in the…
Q: 2. An aluminium alloy specimen of gauge length 75 mm and of diameter 11.28 mm was subjected to a…
A: The area of the specimen is
Q: The displacements of a 2D element is a structural component along the X and Y axses are as follows.…
A:
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- A high-strength steel bar used in a large crane has a diameter d = 2.00 in. (sec figure). The steel has a modulus of elasticity E = 29 × 10 psi and Poisson’s ratio is v = 0.29. Because of clearance requirements, the diameter of the bar is limited to 2.001 in. when it is compressed by axial forces. What is the largest compressive load Pmaxthat is permitted?A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?An aluminum bar has length L = 6 ft and diameter d = 1.375 in. The stress-strain curse for the aluminum is shown in Fig. 1.34. The initial straight, line part of the curve has a slope (modulus of elasticity) of 10.6 × 106 psi. The bar is loaded by tensile forces P = 44.6 k and then unloaded. (a) That is the permanent set of the bar? (b) If the bar is reloaded. what is the proportional limit? hint: Use the concepts illustrated in Figs. l.39b and 1.40.
- A W 8 × 28 beam of a length 10 ft is held between immoveable supports. The beam has a modulus of elasticity E = 29,000 ksi and coefficient of thermal expansion a = 6.5 ×10-6 /?. If the temperature of the beam is raised uniformly by an amount AT = 20°F, calculate the thermal stress aTin the beam.Determine the strain energy per unit volume (units of psi) and the strain energy per unit weight (units of in ) that can be stored in each or the materials listed in the accompanying table, assuming that the material is stressed to the proportional limit. DATA FOR PROBLEM 2.7-5 Material Weight Density (lb/in3) Modulus of Elasticity (ksi) Proportional Limit (psi) Mild sleel 0.284 30,000 36,000 Tool steel 0.284 30,000 75,000 Aluminum 0.0984 10,500 60,000 Rubber (soft) 0.0405 0.300 300On the surface of a structural component in a space vehicle, the strains arc monitored by means of three strain gages arranged as shown in the figure. During a certain maneuver, the following strains were recorded: e, = 1100 X l0_6, 6h = 200 X lO_6, and e = 200 X 10-6. Determine the principal strains and principal stresses in the material. which is a magnesium alloy for which E = 6000 ksi and v = 0.35. Show the princ ipal strains and principal stresses on sketches of properly oriented elements.
- Solve the preceding problem for an aluminum plate with h = 10 in.. i = 0.75 in., E = 10,600 ksi, v = 0.33. P = 96 kips. Pt,. = 24 kips. and V =18 kips. For part (b) of Problem 7.5-12, assume that the required strain energy stored is 640 in.-lb. In part (c). the change in volume cannot exceed 0.05%.(a) Solve part (a) of the preceding problem if the pressure is 8.5 psi, the diameter is 10 in., the wall thickness is 0,05 in., the modulus of elasticity is 200 psi, and Poisson's ratio is 0.48. (b) If the strain must be limited to 1.01, find the maximum acceptable inflation pressureA brass plate with a modulus of elastici ty E = 16 X 106 psi and Poisson’s ratio a = 0.34 is loaded in biaxial stress by normal stresses r and cry. (sec figure). A strain gage is bonded to the plate at an angle 4 = 350 If the stress o is 10,700 psi and the strain means used by the gageise = 390 X 106.whatisthcmax- imum in-plane shear stress (Tr, ),. and shear strain (>‘ ).? What is the maximum shear strain (y ) in the x-: plane? What is the maximum shear strain (y ).. in the y-r plane?
- Solve the preceding problem for the following data: diameter LO m, thickness 48 mm, pressure 22 MPa, modulus 210 GPa. and Poisson's ratio 0.29A prismatic bar of length L = 1.8 m and cross-sectional area A = 480 mm" is loaded by forces P{= 30 kN and A = 60 kN (see figure) The bar is constructed of magnesium alloy having a stress-strain curve described by the Ram berg-Osgood equation: 45.000 618 UW id which u has units of mega pascals (MPa). (a) Calculate the displacement 8t- of the end of the bar when the load P:acts alone. (b) Calculate the displacement when the load P, acts alone. (c) Calculate the displacement when both loads act simultaneously.An NDT examination of a steel component reveals the presence of a 5 mm long edge crack. If plane - strain conditions prevail (KIC = 75 MPa.m0.5), what would be the residual service lifetime of the steel part if it were subjected to repeated stresses of 400 MPa? The Paris law equation for the steel has parameters of A=4X10-37 and m = 4