9-24 A 0.5-m-long thin vertical copper plate is subjected to a uniform heat flux of 1000 W/m² on one side, while the other side is exposed to air at 5°C. Determine the plate midpoint temperature onosed to air at 5°C. Determine the plate midpoint temperature for (a) a highly polished surface and (b) a black oxidized surface. Hint: The plate midpoint temperature (T,2) has to be found itera- tively. Begin the calculations by using a film temperature of 30°C. Copper plate (highly polishe Copper plate (black oxidized) T surr Air Air 5°C 5°C TL2 (a) (b) We must consider radiation. Use ɛ = 0.02 for polished copper and ɛ = 0.73 for black oxide finish. Ans: a. 147.2°C b. 88.5°C. Show all steps and at least 1 iteration. 1000 W/m² 1000 W/m2

9-24 A 0.5-m-long thin vertical copper plate is subjected to a uniform heat flux of 1000 W/m² on one side, while the other side is exposed to air at 5°C. Determine the plate midpoint temperature onosed to air at 5°C. Determine the plate midpoint temperature for (a) a highly polished surface and (b) a black oxidized surface. Hint: The plate midpoint temperature (T,2) has to be found itera- tively. Begin the calculations by using a film temperature of 30°C. Copper plate (highly polishe Copper plate (black oxidized) T surr Air Air 5°C 5°C TL2 (a) (b) We must consider radiation. Use ɛ = 0.02 for polished copper and ɛ = 0.73 for black oxide finish. Ans: a. 147.2°C b. 88.5°C. Show all steps and at least 1 iteration. 1000 W/m² 1000 W/m2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Reconsider Prob. 9-20. Using the EES (or other) software, evaluate the effect of the plate thickness on the surface temperature exposed to the cold air. By varying the plate thickness from 0.01 to 0.1 m, plot the plate surface temperature on the cold air side as a function of the plate thickness. Prob A 0.2-m-long and 25-mm-thick vertical plate (k = 1.5 W/m∙K) separates the hot water from the cold air at 2°C. The plate surface exposed to the hot water has a temperature of 100°C, and the surface exposed to the cold air has an emissivity of 0.73. Determine the temperature of the plate surface exposed to the cold air (Ts,c).
How can we use the transient temperature charts when the surface temperature of the geometry is specified instead of the temperature of the surrounding medium and the convection heat transfer coefficient?
In a production facility, large brass plates of 4-cm thickness that are initially at a uniform temperature of 25°C are heated by passing them through an oven that is maintained at 455°C . The plates remain in the oven for a period of 7 min. Taking the combined convection and radiation heat transfer coefficient to be h = 120 W/m2·K, determine the surface temperature of the plates when they come out of the oven
A heating system is to be designed to keep the wings of an aircraft cruising at a veloeity of 900 km/h above freezing temperatures during flight at 12.200-m altitude where the standard atmospheric conditions are -55.4°C and 188 kPa. Approximating the wing as a cylinder of elliptical cross section whose minor axis is 30 cm and disregarding radiation, determine the average convection heat transfer coefficient on the wing surface and the average rate of heat transfer per unit surface area.
A person puts apples, whose initial temperature is 30 °C, into a 2 °C-cold room. If the heattransfer coefficient at the apples’ surface is 8 W/m2K, determine the center and surfacetemperatures of the apples after one hour. Assume the apples are spherical in shape with adiameter of 9 cm and also state your assumptions
what are the different modes of heat transfer? Explain transfer of heat by convection process?
what is the convection heat transfer coefficient for ambient air at 43°C
Why is heat transfer faster in forced convection compared to natural convection
Consider a person who is trying to keep cool on a hot summer day by turning a fan on and exposing his body to air flow. The air temperature is 32°C, and the fan is blowing air at a velocity of 5 m/s. The surrounding surfaces are at 40°C, and the emissivity of the person can be taken to be 0.9. If the person is doing light work and generating sensible heat at a rate of 90 W, determine the average temperature of the outer surface (skin or clothing) of the person. The average human body can be treated as a 30-cmdiameter cylinder with an exposed surface area of 1.7 m2. Evaluate the air properties at film temperature of 35°C and 1 atm.
A long 2-in-diameter rod with surface temperature of 200°F is submerged in a bath of fluid. Determine the Grashof and Rayleigh numbers if the fluid is (a) liquid water at 40°F, (b) liquid ammonia at 40°F, (c) engine oil at 50°F, and (d) air at 40°F (1 atm).
Define the cooling of a boiled egg by forced and natural convection.
An average person generates heat at a rate of 240 Btu/h while resting in a room at 70°F. Assuming onequarter of this heat is lost from the head and taking the emissivity of the skin to be 0.9, determine the average surface temperature of the head when it is not covered. The head can be approximated as a 12-in-diameter sphere, and the interior surfaces of the room can be assumed to be at the room temperature.