NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A textile plant requires 4 kg/s of saturated steam at 2 MPa, which is extracted from the turbine of a cogeneration plant. Steam enters the turbine at 8 MPa and 500°C at a rate of 11 kg/s and leaves at 20 kPa. The extracted steam leaves the process heater as a saturated liquid and mixes with the feedwater at constant pressure. The mixture is pumped to the boiler pressure. Assume an isentropic efficiency of 88 percent for the pumps and 84 percent for the turbine. Boiler Pump II Process heater- kw Turbine Condenser Pump I Determine the net power output. (You must provide an answer before moving on to the next part.) The net power output is

NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A textile plant requires 4 kg/s of saturated steam at 2 MPa, which is extracted from the turbine of a cogeneration plant. Steam enters the turbine at 8 MPa and 500°C at a rate of 11 kg/s and leaves at 20 kPa. The extracted steam leaves the process heater as a saturated liquid and mixes with the feedwater at constant pressure. The mixture is pumped to the boiler pressure. Assume an isentropic efficiency of 88 percent for the pumps and 84 percent for the turbine. Boiler Pump II Process heater- kw Turbine Condenser Pump I Determine the net power output. (You must provide an answer before moving on to the next part.) The net power output is

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Please could you explain to me how to solve this exercise Consider a modified cogeneration power plant with regeneration. Steam enters the turbine at 6MPa and 450ºC at a rate of 20Kg/s, and expands to a pressure of 0.4MPa. At this pressure 60% of the water vapour is extracted from the turbine, and the rest is expanded to a pressure of 10KPa. Part of the extracted steam is used to heat the feed water in an open feed water heater. The rest of the extracted vapour is used for process heating, and leaves the process heater as a saturated liquid at 0.4MPa. It is then mixed with the feed water leaving the feed water heater, and the mixture is pumped to boiler pressure. The vapour in the condenser is cooled and condensed by cooling water from a nearby river, which enters the adiabatic condenser at a rate of 463Kg/s. Consider the ideal equipment and demonstrate the enthalpy values shown a) The temperature rise of the river cooling water in the condenser is: (R=8°C) b) The mass flow of steam…
A 600-MWe power plant has an efficiency of 36 % with 15% of the waste heat beingreleased to the atmosphere as stack heat and the other 85% taken away in the coolingwater. Instead of drawing water from a river, heating it, and returning it to the river, this plant uses an evaporative cooling tower wherein heat is released to the atmosphere as cooling water is vaporized. At what rate must 15 °C makeup water be provided from the river to offset the water lost in the cooling tower?
Steam enters the high-pressure turbine of a steam power plant that operates on the reheat Rankine cycle at 10 MPa and 550°C and leaves at 4 MPa. Steam is then reheated to 500°C before it expands to a pressure of 40 kPa. The enthalpy of steam is 3190 kJ/kg at the exit of the high-pressure turbine, and 2550 kJ/kg at the exit of the low-pressure turbine. Disregarding the pump work, the cycle efficiency is
A gas-turbine power plant operates on a simple Brayton cycle with air as the working fluid. The air enters the turbine at 120 psia and 2000 R and leaves at 15 psia and 1200 R. Heat is rejected to the surroundings at a rate of 6400 Btu/s, and air flows through the cycle at a rate of 40 lbm/s. Assuming the turbine to be isentropic and the compressor to have an isentropic efficiency of 80 percent, determine the net power output of the plant. Account for the variation of specific heats with temperature.
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at –35°C by rejecting waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the compressor consumes 3.3 kW of power, determine the mass flow rate of the refrigerant,
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at –35°C by rejecting waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the compressor consumes 3.3 kW of power, determine the refrigeration load.
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at –35°C by rejecting waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the compressor consumes 3.3 kW of power, determine the minimum power input to the compressor for the same refrigeration load.
A steam power plant operates on a reheated Rankine cycle. Steam enters the high pressure turbine at a pressure of 12.5 MPa and a temperature of 550 ̊C, with a flow rate of 7.7 kg/s and exits at a pressure of 2 MPa. The steam is then heated to 450 C at constant pressure before being expanded in the low pressure turbine and exits the condenser as a saturated liquid at 10 kPa. Since the isentropic efficiencies of the turbine and the pump are 85 percent and 90 percent, respectively; a) degree of dryness, b) net power, c) thermal efficiency of the cycle
Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500C and is cooled in the condenser at a pressure of 10 kPa. Assuming an isentropic efficiency of 85 percent for both the turbine and the pump, determine the actual Qin (kJ/kg). (Use 2 decimal places for the final answer.)
Consider a steam power plant operating on a simple Rankine cycle. Steam enters the turbine at 15 MPa and 650°C and is condensed in the condenser at a pressure of 15 kPa. Assuming an isentropic efficiency of 84% and 86% for the pump and turbine, respectively, determine the actual Qin (kJ/kg). (Use 2 decimal places for the final answer.)
A refrigeration system with R134a as the working fluid is used to maintain a space at 25°C by absorbing heat from water entering the evaporator at 50°C with atmospheric pressure at a rate of 0.065kg/s and exiting at 40°C. The compression has an isentropic efficiency of 75%. The refrigerant exits the evaporator at 20°C with 0.5542 MPa, while the condenser outlet temperature is 3.8°C.Determine the heat exchange in the evaporator.
A refrigerated room is kept at −18◦C by a vapor-compression cycle with R-134a as the refrigerant. Heat is rejected to cooling water that enters the condenser at 14◦C at a rate of 0.35 kg/s and leaves at 22◦C. The refrigerant enters the condenser at 1.2MPa and 50◦C and leaves at the same pressure subcooled by 5◦C. If the compressor consumes 5.5 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load and the COP, (c) the second-law efficiency of the refrigerator and the total exergy destruction in the cycle, and (d) the exergy destruction in the condenser. Take specific heat of water to be 4.18 kJ/kg·◦C.