nozzle from a tank where the temperature is 400 K. Air is supplied to a The throat area of the converging-diverging converging-diverging nozzle is and 0.01 m² and the mass flow rate through the nozzle is 3.5 kg/s. The medium into which the nozzle discharges is at a pressure of 100 kPa. A normal shock wave is located at the diverging part of the nozzle and the velocity at the exit of the nozzle is 200 m/s. Assuming adiabatic and frictionless flow, determine a) the Mach number upstream of the shock wave and b) the area at which the shock wave is located. T = 400 K At = 0.01 m² p = 100 kPa V₂ = 200 m/s

nozzle from a tank where the temperature is 400 K. Air is supplied to a The throat area of the converging-diverging converging-diverging nozzle is and 0.01 m² and the mass flow rate through the nozzle is 3.5 kg/s. The medium into which the nozzle discharges is at a pressure of 100 kPa. A normal shock wave is located at the diverging part of the nozzle and the velocity at the exit of the nozzle is 200 m/s. Assuming adiabatic and frictionless flow, determine a) the Mach number upstream of the shock wave and b) the area at which the shock wave is located. T = 400 K At = 0.01 m² p = 100 kPa V₂ = 200 m/s

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Nitrogen enters a diffuser at 200 m/s with a pressure of 80 kPa and a temperature of -20 C. It leaves with a velocity of 15 m/s at an atmospheric pressure of 95 kPa. If the inlet diameter is 100 mm, the exit temperature is nearest
Q1> Air at 30 C and 101 Pa is drawn through a covergent-divergent nczze with thrcat area 0.025 m² and exit area 0.0724 m², discharging into a large vacuun tank. Determíne the conditions (a) upstream and b) dourstrearm of a normal shock which is positioned at the nozzie exit
Q.2 Air which enters a diverging duct is slowed by a normal shock wave, as shown in figure. The airstream enters the duct at a Mach number of 3 and leaves it at a Mach number of 0.4. the exit cross-sectional area of the duct is twice the inlet cross- sectional area. Determine the pressure ratio across the normal shock wave, and the ratio of the exit pressure to the inlet pressure. M. = 0.4 M; = 3
6 A converging nozzle Is fed with air from a large reservoir where the . temperature and pressure are 400 K and 170 kPa, respectively. The nozzle has an exit cross-sectional area of 0.001 m2 and discharges into the atmosphere with a pressure of 100 kPa. The flow Is isentropic throughout the nozzle. Determine the pressure, Mach number, temperature and velocity at the exit plane, and also /ind the mass flow rate.
1. Air is flowing isentropically through a converging duct which is fed from a large where the temperature and КРа, respectively. At a certain point along the duct, where the cross-sectional area is reservoir pressure are 350 K and 250 0.005 m?, pressure is 150 kPa. Determine the Mach number, temperature and velocity at that point and also calculate the mass flow rate. (Ans: 330.1 K, 0.549, 162.8 kPa, 1.718 kg-s*).
stagi 900 kPa 1- Air enters a compressor for a mass flow rate of 0.04 kg/s. at a stagnation temperature 358 K. Assuming the AIR compression process to be isentropic, determine the power 0.04 kg/s require. 100 kPa stagnation
Q3/( ) Air is flowing isentropically through a converging duct which is fed from a large reservoir where the temperature and pressure are 300K and 400kpa, respectively. The maximum mass flow rate through the duct is 4kg/s. Determine the Mach number, pressure, temperature and velocity at a point where the cross-sectional area is 0.01m².
Q.2. Air flows through a constant-area duct is connected to a reservoir at a temperature of 500°C and a pressure of 500 kPa by a converging nozzle, as shown in Figure. Heat is lost at the rate of 250 kJ kg. Determine the exit pressure and Mach number and the mass flow rate for a back pressure of 0 kPa. q- 250 kJkg P = 500 kPa T,= 500°C Ps = 0 kPa D=0.02m
An isentropic converging-diverging nozzle receives air from a huge reservoir where the temperature and pressure are 300 K and 400 kPa respectively. The nozzle is designed with throat and exit diameters being 0.2 m and 0.4 m respectively. The nozzle is connected with a 6 m-length adiabatic constant area duct as shown in the figure. If there is a shock wave at the exit of the nozzle, determine: 1. the ratio of duct area at shock wave to critical area for isentropic nozzle (Aş/A;") 2. Mach number upstream the shock wave (M2) 3. Mach number downstream the shock wave (M,). 4. Mach number at the exit of the duct (M2). 5. the pressure at the exit of the duct (Pe). 6. the temperature at the exit of the duct (Te). Take f= 0.002. Isentropic Nozzle Adiabatic Duct P. = 400 kPa T.- 300 K Normal Shock Wave 6 m
7. An underexpanded converging-diverging nozzle has throat and exit cross-sectional areas of 0.001 m² and 0.004235 m², respectively, as shown in the figure. Air is supplied from a large reservoir, where the pressure and the temperature are 1500 kPa and 500 K, respectively. If the back pressure is 30 kPa, determine the Mach number, temperature, and direction of the flow at the downstream of the expansion fan. (Ans. 3.21, 163.4 K, 3.89⁰) p2 = 30 kPa
Question A1 A converging-diverging nozzle has a throat area of 0.002 m? and an exit area of 0.0077 m?. The upstream air reservoir has stagnation pressure and temperature conditions: po=1000 kPa and To=500 K. The gas constant for air is 287 J/ kg K and its ratio of specific heats is 1.4. What is mass flow rate out of this nozzle when it operates in choked flow conditions?
Air flows through a constant cross-section conduit with Mack number Ma = 1 at 200 KPa pressure and 100°C temperature. State the necessary assumptions and calculate: d) With the specified inlet velocity a gas is flowing isentropically in the converging duct. At the throat if we assume that the velocity is supersonic, how does the mass flow rate be affected compared to sonic velocity at the throat. How could supersonic velocity can be achieved in this case? Note : (The properties of air at room temperature are R = 0.287 kPa.m3/kg.K and k = 1.4.) please answer my question , please help me , don't use hand write , I need by Ms word