One cubic yard of fresh concrete mix includes 1900 lbs coarse and 1150 lbs fine aggregates. Water-cement ratio (W/C) for the mix is 0.5. mix? Given information: Concrete weight = 150 pcf Weight of standard cement bags = 94 lbs Water weight = 8.34 pounds per gallon Approximately how many gallons of water should be added to each cubic yard of this 20 gallons 30 gallons 40 gallons 50 gallons

One cubic yard of fresh concrete mix includes 1900 lbs coarse and 1150 lbs fine aggregates. Water-cement ratio (W/C) for the mix is 0.5. mix? Given information: Concrete weight = 150 pcf Weight of standard cement bags = 94 lbs Water weight = 8.34 pounds per gallon Approximately how many gallons of water should be added to each cubic yard of this 20 gallons 30 gallons 40 gallons 50 gallons

Fundamentals Of Construction Estimating

4th Edition

ISBN:9781337399395

Author:Pratt, David J.

Publisher:Pratt, David J.

Chapter11: Pricing Concrete Work

Section: Chapter Questions

Problem 4RQ

See similar textbooks

Similar questions

A batch of concrete consisted of 200 lbs fine aggregate (sand), 400 lbs coarse aggregate(gravel), 95 lbs cement, and 5 gallons of water. The relative density of the sand and gravel may be taken as 0.65 and that the cement as 3.10 What was the total volume ofconcrete produced? FULL solution please thank u
The design of a concrete mix requires 1173 kg/m3of gravel in dry condition,582 kg/m3of sand in dry condition, and 157 kg/m3of free water. The gravelavailable at the job site has a moisture content of 0.8% and absorption of1.5%, and the available sand has a moisture content of 1.1% and absorptionof 1.3%. What are the masses of gravel, sand, and water per cubic meter thatshould be used at the job site?
You are working on a concrete mix design that requires each cubic yard ofconcrete to have 0.45 water–cement ratio, 1165 kg/m3 of dry gravel, 4% air content, and 335 kg/m3 of cement. The available gravel has a specific gravity of Ggravel = 2.7, a moisture content of 1.6%, and absorption of 2.4%. The available sand has a specific gravity of Gsand = 2.5, a moisture content of 4.8%, and absorption of 1.5%. For each cubic meter of concrete needed on the job, calculate the mass of cement, moist gravel, moist sand, and water that should be added to the batch. Summarize and total the mix design when finished (don’t include air entrainer in summary).
You are working on a concrete mix design that requires each cubic yard ofconcrete to have 0.45 water–cement ratio, 1165 kg/m3 of dry gravel, 4% aircontent, and 335 kg/m3 of cement. The available gravel has a specific gravity of Ggravel = 2.7, a moisture content of 1.6%, and absorption of 2.4%. The available sand has a specific gravity of Gsand = 2.5, a moisture content of 4.8%, and absorption of 1.5%. For each cubic meter of concrete needed on the job, calculate the mass of cement, moist gravel, moist sand, and water that should be added to the batch. Summarize and total the mix design when finished (don’t include air entrainer in summary).
It has been determined by trial mixing that a 1:1½:3 mixture (by volume) with 5 gal water per sack of cement produces a satisfactory mixture of concrete with a 2-in slump. What quantity of mixed concrete in cubic feet will a barrel of cement produce if the following is known about cement, sand and stone aggregate? Voids Unit weight,lb Cement 0.513 94 Sand 0.360 120 Stone 0.330 105 A. 16.51 ft³B. 17.25 ft³C. 17.80 ft³D. 18.35 ft³
You are working on a concrete mix design that requires each cubic meter of concreteto have 0.40 water–cement ratio, 1165 kg/m3 of dry gravel, 4% air content, and 335kg/m3 of cement (Specific Gravity = 3.15). The available gravel has a specific gravityof (S.G) gravel = 2.7, a moisture content of 1.6%, and absorption of 2.4%. The availablesand has a specific gravity of (S.G) sand = 2.5, a moisture content of 4.8%, andabsorption of 1.5%.For each cubic meter of concrete needed on the job, calculate the mass of cement,moist gravel, moist sand, and water that should be added to the batch. Summarizethe total the mix design in a table.
The correct mix for a batch of concrete is 5:4:2 in terms of sand, gravel, and cement. The batch is to have 2200 pounds of these ingredients. How many of each are needed? Sand Gravel Cement
The water–cement ratio is important because it influences all of the desirablequalities of concrete.a. Referring to Figure 5.10, which portion of water is used to calculate thewater–cement ratio?b. What is a typical water–cement ratio for normal strength concrete?c. What is the water–cement ratio needed for hydration only when concreteis in the plastic state?d. Why is the extra water necessary?e. Briefly describe how super high strength concrete (fc′ = 15,000 psi) canbe made.
Assumng class A concrete mix, compute for the following: a. Total number of 40kg cement bags b. Quantity of sand in cu. m c. Quantity of gravel in cu. m.
The moisture content of coarse aggregate is 0.60%. If the mass of the aggregate is 1,290 kg, adjust the mass of the aggregate. If the volume of sand is 0.30 cubic meter and its specific gravity is 1.50, what is the mass of the sand? If the mass of mixing water is 175 kg, and the required water-cement ratio is 0.65, how much cement powder is needed in the concrete mix? If the target slump of concrete is 160 mm, the maximum nominal size of the coarse aggregate is 37.5 mm, and the smallest nominal size is 9.5 mm, what is the estimated entrapped air in the ordinary concrete mix? The nominal maximum size of coarse aggregate is 25mm, the fineness modulus of coarse aggregates is 2.80, dry rodded mass of coarse aggregates is 1,100 kg and the fineness modulus of fine aggregates is 2.50. How much coarse aggregates is needed in the concrete mix? If the nominal maximum size of coarse aggregates is 25mm, what is the first estimate of air-entrained concrete?
Calculate the slump of fresh concrete mix if you know: 1. W/C =0.47 2. Sand = 648 Kg/m3. 3. Gravel = 1056 Kg/m?. 4. Dry rodded mass of coarse aggregate is 1650 Kg/m?.
Q1 What moisture condition should the coarse and fine aggregate be in when mixing the concrete? A Unknown B Saturated C Oven Dry D Air Dried E SSD Q2 What restriction is placed on the size of a sample of a concrete batch? A 30 L B 15 L C 20 L D 10 L E 5 L