parallel network consists of two branches A and B. Branch A has a resistance of 10 ohm and an inductance of 0.1 H in series. Branch B has a resistance of 20 ohm and a capacitance of 100 F in series. The network is connected to a single-phase supply of 115V at 50Hz. Calculate the magnitude and phase angle of the current taken from the supply.

parallel network consists of two branches A and B. Branch A has a resistance of 10 ohm and an inductance of 0.1 H in series. Branch B has a resistance of 20 ohm and a capacitance of 100 F in series. The network is connected to a single-phase supply of 115V at 50Hz. Calculate the magnitude and phase angle of the current taken from the supply.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.17MCQ: Consider the load convention that is used for the RLC elements shown in Figure 2.2 of the text. A....

See similar textbooks

Similar questions

Consider the load convention that is used for the RLC elements shown in Figure 2.2 of the text. A. If one says that an inductor absorbs zero real power and positive reactive power. is it (a) True (b) False B. If one says that a capacitor absorbs zero real power and negative reactive power (or delivers positive reactive power), is it (a) False (b) True C. If one says that a (positive-valued) resistor absorbs (positive) real power and zero reactive power, is it (a) True (b) False
A series circuit consists of resistance of 10 ohm, an inductance of 200/π mH and capacitance of 1000/π μF . Calculate (a) the current flowing in the circuit if supply voltage is 200 V, 50 Hz, (b) power factor of the circuit, (c) power drawn from the supply. Also draw the phasor diagram.
41. Ideal inductors and capacitors are in phase with each other. True False "By the convention we are using in this course, if the reactance (X) is positive, it is inductive in nature." True False In series-connected ac circuit, the total current though the circuit is always equal to the phasor sum of the individual current though each element." True False "In a R-L series circuit, R=10 ohms and X=10 ohms, the applied voltage is in phase to the circuit total current (assumed applied voltage is the reference)." True False
1 A circuit having a resistance of 12Ω, an inductance of 0.15 H and a capacitance of 100μf in series is connectedacross a 100V, 50Hz supply. Calculate the impedance, current, the phase difference between the current andsupply voltage. 2. Two circuits with impedances of Z1 = 10 + j15Ω and Z2 = 6 – j8Ω are connected in parallel. If the supply current is 20A, what is the power dissipated in each branch?
A parallel circuitcomprisestwo branches, (i) a coil of resistance 20 Ω and inductance 0.07 H and (ii) a capacitance of 60 μF in series with a resistance of 50 Ω. Calculate the current in the mains, active-, reactive-powers,and the power factor of the arrangement when connected across a 200V, 50Hz supply.
A 120 V, 60 Hz power source is connected across an 800 ohm resistance in series with an unknown capacitor. The voltage drop across the resistor is 102 V. Find the, a.) current of the circuit b.) impedance of the circuit c.) Capacitive reactance d.) capacitance value.
i) Three identical capacitors are connected in delta with 400 V. If the line current is 12 A determine the capacitance of each of the capacitors. If the θ = 600 then calculate the power dissipation in kW when it is connected in STAR? ii) Three coils each having resistance 6  and inductance are connected in star with 415V. If the line current is 30 A, find the value of inductive reactance as well as inductance value. If θ = 450 then calculate the power dissipation in kW when it is connected in Delta?
An RLC series circuit connected to a 110 – volt and 50 – cycle AC source, contains the following series resistances and reactances: R1 = 10 ohm, R2 = 15, R3 = 5 ohms, XL1 = 20 ohms, XL2 = 25 ohms, XC = 40 ohms. Find the following: a.) EQUIVALENT REACTANCE b.) TOTAL IMPEDANCE c.) VOLTAGE DROP ACROSS THE CAPACITOR d.) TOTAL INDUCTANCE IN MILLIHENRY e.) TOTAL CURRENT f.) REACTIVE POWER g.) REAL POWER DRAW THE PHASOR DIAGRAM IF POSSIBLE AND ROUND OFF TO FOUR DECIMAL PLACES
a 10 kiloohms resistor is connected in parallel with an inductor L. The parallel combination is then connected in series with a 2 kiloohms resistor and 5nF capacitor. If the whole combination is connected to a voltage supply of 50cis0 volts at a frequency of w=50,000rad/s, find the value of L such that the total current is in phase with the supply voltage. ("in phase") means that the voltage and the current have the same angular displacement.
(i)Three identical capacitors are connected in delta with 400 V. If the line current is 12 A determine the capacitance of each of the capacitors. If the θ = 60 then calculate the power dissipation in kW when it is connected in STAR. (ii) Three coils each having resistance 6 and inductance are connected in star with 415V. If the line current is 30 A, find the value of inductive reactance as well as inductance value. If θ = 45 then calculate the power dissipation in kW when it is connected in delta.
It is required to connect Aktf and capacitive Reactive mechanical meters to measure the electrical energy used in a stone crushing quarry that consumes more than 50KVA. Show the connection diagram of these meters by drawing a figure to the three-phase line coming from the network.
A series circuit composed of a resistance of 24 ohms, an inductance of 0.09 henry and a capacitance of 8 microfarad, is connected to a 120-volt 50-Hz supply. Calculate the (a) power factor of the circuit, (b) total reactive power, (c) voltage drop accross the inductor.