5. A 6.00 uf capacitor with an initial charge of 1200 µC is discharged through a 4.0 M2 resistor. a) Calculate the magnitude of the current in the resistor 12.0 s after the resistor is connected across the terminals of the capacitor. VC = (1- e24) %3D 4E6 1.2NO -10 b) What is the charge that remains on the capacitor after 12.0s? 2=Q (1-e-Tha 1/241 T-24 See 2=4.7 x10- %3D c) How much energy has the capacitor dissipated through the resistor in those 12 s? (Hint: energy is the integral of the power with respect to time.) 12 8.31 xio4 12

5. A 6.00 uf capacitor with an initial charge of 1200 µC is discharged through a 4.0 M2 resistor. a) Calculate the magnitude of the current in the resistor 12.0 s after the resistor is connected across the terminals of the capacitor. VC = (1- e24) %3D 4E6 1.2NO -10 b) What is the charge that remains on the capacitor after 12.0s? 2=Q (1-e-Tha 1/241 T-24 See 2=4.7 x10- %3D c) How much energy has the capacitor dissipated through the resistor in those 12 s? (Hint: energy is the integral of the power with respect to time.) 12 8.31 xio4 12

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter28: Direct-current Circuits

Section: Chapter Questions

Problem 28.63AP: The- pair of capacitors in Figure P28.63 are fully charged by a 12.0-V battery. The battery is...

See similar textbooks

Similar questions

Unreasonable Results (a) What current is needed to transmit 1.00 102 MW of power at 10.0kV? (b) Find the resistance of 1.00 km of wire that would cause a 0.0100% power loss. (c) What is the diameter of a 1.00-km-long copper wire having this resistance? (d) What is unreasonable about these results? (e) Which assumptions are unreasonable, or which premises are inconsistent?
You are working with an oceanographer who is studying how the ion concentration in seawater depends on depth. She shows you the device that she uses to measure the resistivity of water from a boat. It consists of a pair of concentric metallic cylinders at the end of a cable (Fig. P26.36). Seawater flows freely between the two cylindrical shells. She makes a measurement by lowering the device into the water and applying a potential difference V between the inner and outer cylinders. This produces an outward radial current I in the seawater between the shells. She shows you the current and voltage data for the water at a particular depth and is then called away to answer a long call on her cellphone about a laboratory issue back on the mainland. As she leaves, she says, Have the resistivity of the water calculated when I get back. She forgot to show you any tables or formulas to use to determine the resistivity, so you are on your own. Quick! Find an expression for the resistivity in terms of I and V before she finishes her phone call! Figure P26.36
The current I is measured through a sample of an ohmic material as a voltage V is applied, (a) What is the current when the voltage is doubled to 2V (assume the change in temperature of the material is negligible)? (b) What is the voltage applied is the current measured is 0.27 (assume the change in temperature of the material is negligible)? What will happen to the current if the material if the voltage remains constant, but the temperature of the material increases significantly?
The- pair of capacitors in Figure P28.63 are fully charged by a 12.0-V battery. The battery is disconnected, and the switch is then closed. Alter 1.00 ms has elapsed, (a) how much charge remains 011 the 3.00-F capacitor? (b) How much charge remains on the 2.00-F capacitor? (c) What is the current in the resistor at this time?
A particle accelerator produces a beam with a radius of 1.25 mm with a current of 2.00 mA. Each proton has a kinetic energy of 10.00 MeV. (a) What is the velocity of the protons? (b) What is the number (n) of protons per unit volume? (b) How many electrons pass a cross sectional area each second?
1- A current of 2 ụA is discharged on a capacitor with a plate area of 100 cm² and a capacitance of 1x10-7F at t=0. At what rate does the voltage between the plates change at t=0?A) 5V/sB) 20V/sC) 10 V/sD) 15V/sE) 25V/s
Suppose you have a rod of pure silicon with a diameter of 2.79cm and a length of 20.6cm. These rods are often used in experiments, such as the Large Hadron Collider in France/Switzerland to detect high-energy particles, and they have a very high resistivity of 2300Ω⋅m. What current, in amperes, flows through the rod when a potential difference of 1.23* 10^3 V is applied between its ends ?
41. A 5.0-µF capacitor with an initial charge of 60 µF discharges while connected in series CHA with a 20-kl resistor. (A) What is the initial potential difference across the capacitor? (B) What is the initial current? (C) What is the half-life? (D) How much charge is stored on the capacitor after 0.20 s?
___7. Given a wire stretching from north to south, electrons are moving south along it. Which ofthe following statements is correct?A. The actual current is directed north; the conventional current is directed south.B. The actual current is directed south; the conventional current is directed north.C. The actual current is directed north; the conventional current is also directed north.D. The actual current is directed south; the conventional current is also directed south.___8. If 3 x 1021 electrons go through the cross section of a wire every minute, what is the currentthrough the wire?A. 0.18 A C. 480 AB. 8 A D. 5 x 1019 A ___9. When the length of the wire is doubled, its resistance is: A. halved C. quarteredB. doubled D. quadrupled ___10. The current through the bulb is 15 mA when connected to a 3-V source. What is theresistance of the bulb?A. 0.045 Ω C. 2 ΩB. 0.20 Ω D. 2000 Ω
2. If a circuit element can withstand a maximum current of 15 A, how many electrons can pass through it each second?3. How many electrons are transferred in a 10.0 A current that runs for 3.0 s?4. If 2.00 × 102mA of current flows through the filament of a light bulb, how many electrons would pass through the filament in 30.0 s?5. What feature of a river is most similar to current in an electric circuit? (A) The depth of the river measured in meters (B) The temperature of the water measured in degrees Celsius (C) The vertical drop between two points along the river measured in meters (D) The volume of water moving past a point measured in liters per second
A tungsten wire is used to determine the melting point of indium. The resistance of the tungsten wire is 2.472 at 20.0°C and increases to 4.409 as the indium starts to melt. αtungsten = 4.50 x 10−3 (°C)−1. What is the melting temperature of indium in °C?
Integrated Concepts (a) What energy is dissipated by a lightning bolt having a 20,000-A current, a voltage of 1.00×102MV, and a length of 1.00 ms? (b) What mass of tree sap could be raised from 18.0ºC to its boiling point and then evaporated by this energy, assuming sap has the same thermal characteristics as water?