Select the lightest suitable W-shape of A588 grade 50 steel using ASD Prob 5 The interior column of an industrial building supports a roof dead load of 55 psf and a snow load of 35 psf. The column is 25 feet long. The bottom end is fixed, and the top end pinned. In addition, it is braced by struts at a point 6 feet down from the column top as shown to the right. The columns has a tributary area of 1800 square feet. The structure is braced in both the xx and yy planes of the column. Select the lightest suitable W-shape of A588 Grade 50 steel using ASD. 0-9 19'-0" Pinned Brace Fixed

Select the lightest suitable W-shape of A588 grade 50 steel using ASD Prob 5 The interior column of an industrial building supports a roof dead load of 55 psf and a snow load of 35 psf. The column is 25 feet long. The bottom end is fixed, and the top end pinned. In addition, it is braced by struts at a point 6 feet down from the column top as shown to the right. The columns has a tributary area of 1800 square feet. The structure is braced in both the xx and yy planes of the column. Select the lightest suitable W-shape of A588 Grade 50 steel using ASD. 0-9 19'-0" Pinned Brace Fixed

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter10: Plate Girders

Section: Chapter Questions

Problem 10.7.8P

See similar textbooks

Similar questions

BAL=8 mt = 13 mm-150 mm113 mmFor the steel column with both ends fixed against rotation having a tubularcross-section, determine the allowable load Pall against buckling. E=200 GPa andOy=250 MPa.
A cantilever beam of 7.4—ft(2.20—m) span carries a uniform dead load of 685 Ib/ft(10kN/m) and a concentrated live load of 18k (80 kN) at a distance 3ft(0.9m) from the face of the support. design the beam for moment and shear using the strength design method. given: f’c=3ksi (21 MPa), fy=60 ksi (420 MPa), b=8in. (200mm) and use p=3/4pmax
An exterior T-beam has a clear simply supported length of 6.75m. It has a clear distance to the next webof 3.5m. The base of the web to the beam is 350mm and has an effective depth of 500mm. Use 4-28mm diameter reinforcements with a slab thickness of 120 mm. f'c = 21 Mpa ; fy = 415 Mpa. a. effective width of the flange b. depth of compression block of the beam c. total area of the compression block d. ultimate moment capacity of the beam
A short rectangular column 300 mm on one side and 400 mm on the other side. It is reinforced with 8-20-mm-diameter (28) longhitudinal bars equally distributed to the shorte sides of the column. Use f'c = 21 MPa and fy = 415 MPa. Calculate the required spacing of 10-mm-diameter ties, s (mm). Calculate the nominal axial strength of the column, Pn (kN). Calculate the maximum ultimate axial load the column can carry, Pu (kN)
Design a round spiral column to support an axial dead load of 950KN and an axial live load of 1210KN Use Fy = 414Mpa and f’c = 21Mpa. Assume 2% steel ratio and use 28mm main bars and 20mm spirals. Use 30mm steel cover. Give the diameter of the spiral column and the area of main reinforcement.
Calculate the ultimate moment capacity (kN - m) of the T - section with the given parameters: PARAMETERS: fc = 25 MPa fy = 345 MPa stirrups dia. = 10 mm concrete cover, cc = 40 mm BEAM DIMENSIONS: bf = 900mm hf = 100mm h = 500mm (total height) bw = 300 mm As = 10 - 28mm diameter rebars at two layers with vertical spacing of 28mm (LOCATED at bw portion)
A reinforced concrete beam 6m in length and 800 mmx 550mm in cross section is reinforced w/ 4-32 & bar supports and axle load of 50kN and 80kN on a wheel base of 3m. Using steel cover of 75mm, f'c = 28 MPa, fs=138 MPa. Let fc= 0.45 f'c. Find the Moment capacity of beam.
A 300mm by 600mm rectangular beam is subjected to uniform ultimate load of Wu=200kN/m over the whole span. The beam is simply supported over a span of 4m. The reinforcements are 2-28 mm diameter compression reinforcement and 4-28 mm diameter tension reinforcement. Use f'c=21MPa, fy=415MPa, stirrups=10mm, and cc=40mm. Calculate the maximum positive moment in the beam in kN.m.0 Calculate the depth of compression block in the beam in mm.0 Calculate the stress in the compression compression reinforcement in MPa.0 Calculate the ultimate moment capacity of the beam section in kN.m.0
A 300mm by 600mm rectangular beam is subjected to uniform ultimate load of Wu=200kN/m over the whole span. The beam is simply supported over a span of 4m. The reinforcements are 2-28 mm diameter compression reinforcement and 4-28 mm diameter tension reinforcement. Use f'c=21MPa, fy=415MPa, stirrups=10mm, and cc=40mm. Calculate the maximum positive moment in the beam in kN.m.0 Calculate the depth of compression block in the beam in mm.0 Calculate the stress in the compression compression reinforcement in MPa.0 Calculate the ultimate moment capacity of the beam section in kN.m.0 need answer please thank you
A rectangular beam has b = 300 mm, d = 500 mm, As = 6-32 mm, f’c = 34 MPa, grade 60 reinforcement (fy = 414 MPa). Calculate the ultimate moment capacity of the beam. Answer key:Mu = 511.76 kN-m
Determine the required plastic moment capacity of the beam loaded as shown below. The service loads are 42.6 kN/m and 16.54 kN/m, respectively for dead and live loads. Use A-50 steel and LRFD. L=11 m. Use Equilibrium Method and FBD’s.
Steel Design Two channels having the given properties shown is placed at a distance of 300 mm to back and is properly connected by a pair of lacings as shown. Properties of one channel A = 5595 mm2 d = 305 mm x = 17mm Ix = 67.3 x 106 mm4 Iy = 2.12 x 106 mm4 rx = 19.3 mm Assume K = 1.0 Determine the safe axial load in kN, that the column section could carry. Unsupported height of column is 6m.