PROBLEM 1: Both a gage and a manometer are attached to a tank to measure pressure. Given the reading on the pressure gage, determine the differential height h of the mercury column. (Round off ONLY the final result to three decimal places. Indicate the unit of your final answer) * 9.43 psi - Oil SG = 0.72 30" Air -Water 12" -Mercury SG = 13.6 h

PROBLEM 1: Both a gage and a manometer are attached to a tank to measure pressure. Given the reading on the pressure gage, determine the differential height h of the mercury column. (Round off ONLY the final result to three decimal places. Indicate the unit of your final answer) * 9.43 psi - Oil SG = 0.72 30" Air -Water 12" -Mercury SG = 13.6 h

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

An illegal connection was observed on a 300 mm diameter horizontal pipe. Upstream from the connection two gages 600 m apart showed a pres- sure difference of 140 kPa. Downstream from the connection two gages 600 m apart showed a pressure difference of 116 kPa. How much oil (assume logical Gs, four decimal places) is being stolen due to the illegal connection? Assume loss of head ranging from 40% - 50 % of velocity head for every 50 m. (PLEASE INCLUDE FIGURES PLEASE)
help asap please, complete solution PROBLEM 1: Both a gage and a manometer are attached to a tank to measure pressure. Given the reading on the pressure gage, determine the differential height h of the mercury column.
Based on the layout of the water supply system, as show in Figure 1, flow through the delivery pipe, Q = 2.50 cfs and diameter of the pipe, D = 2.65 inch with e = 0.015 inch. Ingore the minor pressure losses and use the following formulae to calculate the major pressure losses. The velocity of flow through the pipe and the friction factor, f, range are estimated to be nearly. Use g = 62.4 lb/ft^3 for water and use Moody's diagram. Water temperature is 20°C (68°F).
An illegal connection was observed on a 300 mm diameter horizontal pipe. Upstream from the connection two gages 600 m apart showed a pres- sure difference of 140 kPa. Downstream from the connection two gages 600 m apart showed a pressure difference of 116 kPa. How much oil (assume logical Gs, four decimal places) is being stolen due to the illegal connection? Assume loss of head ranging from 40% - 50 % of velocity head for every 50 m. (Please use BERNOULLI'S ENERGY EQUATION) Include complet solutions
A closed tank contains 0.610 m of mercury (SGmercury = 13.6), 1.524 m of water, 2.438 m of oil of specific gravity 0.750, and an air space above the oil. If the pressure at the bottom of the tank is 276 kPa gage, what should be the reading at the top of the tank? Express your answer in kPa.
Water flows through a pipe at 152 L/s that changes gradually in diameter from 196 mm at point A to 456 mm at point B. Point B is 6 m higher than point A. The pressures at point A and point B are 126 kPa and 69.3 kPa, respectively. Assume that the datum line passes through point A. Which of the following most nearly gives the head loss in the pipe? (m). Round your answers in 3 decimal places.
Water flows in a Venturi meter shown at a rate of 1.49 ft3/s and the differential gage isdeflected as shown. If the SG of the gage liquid is 1.25, compute the following:a) the difference in pressure from A to B (psi),b) velocity at the throat (ft/s), andc) the coefficient of the venture meter.
Figure shows that the pipe flow of 50 m^3/hr, is driven by pressurized air in the tank Determine the head loss in the "smooth" pipe in meters if its friction factor is 0.014. *12.9517*99.9358*30.4889*39.5136 What gage pressure p1 in kPa, is needed to provide the given flow rate? *1121 kPa*1692 kPa*1328 kPa*1725 kPa Please answer with complete and detailed solutions. thank you. ASAP
A trapezoidal oil tank has the following dimensions: B1 = 8 3/4", B2 = 15 1/2", the height is 65/8" and it is 10 7/8" long. How many gallons of oil will it hold? (231 cu. in. = 1 gallon)
A venturi meter of 400 x 150 mm size is fixed in a horizontal pipe carrying water. The pressure gauge at entry read 137.34 kN/m^2 (gauge). The pressure at the throat was 37.5 cm of mercury (vacuum). Neglecting losses determine the flow rate. Specific gravity of mercury is 13.6.
Give me the solutions of this please. The answers are: Ans. 8,627.5 psi, 31,416 psi Ans. 0.32 in
A gasoline line is connected to a pressure gage through a double-U manometer, as shown. If the reading of the pressure gage is 40 psi, determine the gage pressure of the gasoline line. Assume the unit weight of air to be 0.0765 lb/ft3. pls answer asap thank you