Problem 1: The three ropes in the Figure are tied to a small, very light ring. Two of the ropes are anchored to walls at right angles, and the third rope pulls as shown. a) What is T₁, the tension from Rope 1 for the Figure below on the left? Answer: 86.6 N b) What is T₂, the tension from Rope 2 for the Figure below on the left? Answer: 50.0 N c) What is T3x, the x-component of the tension from Rope 3 for the Figure below on the right? Answer: 50 N. d) What is T3y, the y-component of the tension from Rope 3 for the Figure below on the right? Answer: 80 N. e) What is T3, the tension from Rope 3 for the Figure below on the right? G 12+ (7 1²-913 N Answer: T -

Problem 1: The three ropes in the Figure are tied to a small, very light ring. Two of the ropes are anchored to walls at right angles, and the third rope pulls as shown. a) What is T₁, the tension from Rope 1 for the Figure below on the left? Answer: 86.6 N b) What is T₂, the tension from Rope 2 for the Figure below on the left? Answer: 50.0 N c) What is T3x, the x-component of the tension from Rope 3 for the Figure below on the right? Answer: 50 N. d) What is T3y, the y-component of the tension from Rope 3 for the Figure below on the right? Answer: 80 N. e) What is T3, the tension from Rope 3 for the Figure below on the right? G 12+ (7 1²-913 N Answer: T -

Name: Fnet = ma, x = xo + Voxt += axt², Vx = Vox + axt, (v₂)² = (vox)² + 2a
Uploaded: 2024-03-20T06:56:46.000Z
Channel: Bartleby
Description: Fnet = ma, x = xo + Voxt += axt², Vx = Vox + axt, (v₂)² = (vox)² + 2axAx, g = 9.8 m/sec²Problem 1:The three ropes in the Figure are tied to a small, very light ring. Two of the ropes are anchoredto walls at right angles, and the third rope pulls as

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 12.35P: Review. A 2.00-m-long cylindrical steel wire with a cross-sectional diameter of 4.00 mm is placed...

See similar textbooks

Similar questions

A straight rod has one end at the origin and the other end at the point (L,0) and a linear density given by λ=ax^2, where a is a known constant and x is the x coordinate. Since this wire is not uniform, you will have to use integration to solve this part. Use M=∫L0dm to find the total mass M. Find xcm for this rod. Express your answer in terms of one or both of a and L.
A wire stretches from 2000 mm to 2005 mm when a 500-N box hangs from one end of it. The wire has a cross sectional area of 0.01 cm2. Calculate the Young's modulus of the wire. a. 5.0 × 1012 N/m2 b. 1.0 × 109 N/m2 c. 2.0 × 1011 N/m2 d. 2.0 × 109 N/m2 e. 1.0 × 1011 N/m2
Review. A 2.00-m-long cylindrical steel wire with a cross-sectional diameter of 4.00 mm is placed over a light, frictionless pulley. An object of mass m1 = 5.00 kg is hung from one end of the wire and an object of mass m2 = 3.00 kg from the other end as shown in Figure P12.35. The objects are released and allowed to move freely. Compared with its length before the objects were attached, by how much has the wire stretched while the objects are in motion?
Gold, which has a density of 19.32 g/cm3, is the most ductile metal and can be pressed into a thin leaf or drawn out into a long fiber. (b) If, instead, the gold is drawn out into a cylindrical fiber of radius 2.100 μm, what is the length of the fiber?
A 439 kg load is hung on a wire of length 9 m, cross-sectional area 0.200 x 10–4 m2, and Young's modulus 8.00 x 1010 N/m2. What is the increase in its length (in mm)? (Answer in 2 decimal places)
A force of 5000N is applied outwardly to each end of a 5.0-m long rod with a radius of 34.0 cm and a Young’s modulus of 125 × 10^8 N/m2. The elongation of the rod is: Choices: 1.42mm 0.14mm 0.0040mm 0.55mm 0.0020mm Show complete solution and free body diagram
[ e having same cross sectional area. Due to block the elongation in wire AB s Alyg and in wire CD is Algp then value of sider the diagram where block has weight of 200N. B and CD are two wires of different materials sten Given: Young’s modulus for both wires is ¥p o — (@) 2:3V2 () 1:2V3 (©) 3:3v2 (@ 1:3V3
The diameter of a car's suspension spring decreases uniformly. The force exerted by the spring is given by F = axb. Consider a suspension spring that compresses x1 = 12.4 cm with a 1,000 N load and x2 = 34.0 cm with a 5,000 N load. (Due to the nature of this problem, do not use rounded intermediate values in your calculations—including answers submitted in WebAssign.) (a) Find the constants a (in units of N/mb) and b. a= b= (b) Calculate the work (in J) needed to compress the spring 24.0 cm. (Assume the spring is not initially compressed.) J
A 50-N force is applied to a metal rod with a length of 10 m and a cross-sectional area of 1.0 x 10^(−5) m^2. Supposing that the shear modulus of the rod is 2.5 x 10^10 N/m^2, what would be the shear distance?
An axial pull of 1.5 kN is acting on a bar of consisting two equal lengths as shown but of diameter 10cm and 20 cm respectively. What will be the stresses in the two sections respectively in N/mm2? A. 0.153 and 0.0036 B. 0.290 and 0.046 C. 0.190 and 0.0046 D. 0.124 and 0.124
A solid copper cube has an edge length of 85.5 cm. How much stress must be applied to the cube to reduce the edge length to 85.0 cm? The bulk modulus of copper is 1.4*1011 N/m2.
A cable hanging vertically under gravity must support its weight, w = mg, where m is the mass of the cable and g = 9.8 m/s2 is the acceleration due to gravity. If the cable has a cross sectional area A, length ℓ, and density ?, then the weight of the cable is w = ?Aℓg. The force per unit area at the top of the cable is then T = ?ℓg. Steel has a tensile strength 2 GPa and a density 7.8 x 103 kg/m. If the force per unit area at the top of a hanging cable exceeds the tensile strength, it will snap. Given this, estimate the maximum length of a hanging steel cable. Give your answer in kilometres to one significant figure.