Help? Problem 2: Suppose you have a 2.2 cm diameter rod of pure silicon that is 22 cm long.D A What current, in amperes, flows through it when a potential difference of 0.85 × 103 V is applied between its ends? These rods are often used inexperiments, such as the Large Hadron Collider in France/Switzerland to detect high-energy particles, and have a very high resistivity of 2300 2:m.

Given: The length of the wire is 22 cm. The diameter of the wire is 2.2 cm. The resistivity of the…

Problem 2: Suppose you have a 2.2 cm diameter rod of pure silicon that is 22 cm long. > A What current, in amperes, flows through it when a potential difference of 0.85 × 10³ V is applied between its ends? These rods are often used in xperiments, such as the Large Hadron Collider in France/Switzerland to detect high-energy particles, and have a very high resistivity of 2300 O-m.

Problem 2: Suppose you have a 2.2 cm diameter rod of pure silicon that is 22 cm long. > A What current, in amperes, flows through it when a potential difference of 0.85 × 10³ V is applied between its ends? These rods are often used in xperiments, such as the Large Hadron Collider in France/Switzerland to detect high-energy particles, and have a very high resistivity of 2300 O-m.

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter21: Current And Direct Current Circuits

Section: Chapter Questions

Problem 9P

See similar textbooks

Similar questions

Consider a power plant is located 60 km away from a residential area uses Q-gauge (A=42.40mm2) wire ofcopper to transmit power at a current of I = 100.00 A.How much more power is dissipated in the copper wires than it would be in superconducting wires?
An electronic device designed to operate at any temperature in the range from 10.0C to 55.0C contains pure carbon resistors. By what factor does their resistance increase over this range?
If the current carried by a conductor is doubled, what happens to (a) the charge carrier density, (b) the current density, (c) the electron drift velocity, and (d) the average time interval between collisions?
Suppose you have a rod of pure silicon with a diameter of 2.79cm and a length of 20.6cm. These rods are often used in experiments, such as the Large Hadron Collider in France/Switzerland to detect high-energy particles, and they have a very high resistivity of 2300Ω⋅m. What current, in amperes, flows through the rod when a potential difference of 1.23* 10^3 V is applied between its ends ?
A 220. V potential difference is applied to a space heater that dissipates 440. W during operation.(a) What is resistance during operation?(b) At what rate do electrons flow through any cross-section of the heater element? (c) The space heater has a resistance of 27.5 Ω at 25.0 °C and the temperature coefficient of resistivity is α = 4.50x10^-3 °C^-1. What is the temperature of the space heater internal elements?
Wire section(1) of cross sectional area A1=3mm2 and wire section(2) of cross sectional area A2=7mm2 are connected by a tapered section as shown in the figure. The number density of conduction electrons in the wire is 1030 m-3 ,and resistivity of the wire p=2*10-6 ohm.m . Assume that the current is uniformaly distributed across any cross-section area through the wire's width. Magnitude of electric field in wire section (2) is 6 V/m. A) What is the current flowing in the wire? B) What is the drift speed of conduction electrons in wire section (1)?
The density and resistivity of a cubic metal of mass m=81 g are d=3 g/cm3 and ρ=1.5 x 10-8 Ω m, respectively. When a potential difference of ∆V=5x10-5 V is applied on two opposite faces of the cube, what is the current (A) passing through the surfaces ?
As part of a lecture demonstration, a physics professor plans to hold an uninsulated current-carrying wire in her hands. For safety's sake, the potential difference between her hands is to be no more than 3 V. She holds her hands 1.3 m apart, with the wire stretched tightly between them. The wire is to carry 5.00 A of current and is to be made of aluminum. What is the minimum wire radius in millimeters that is consistent with safety? Let the resistivity of aluminum be 2.75x10^-8Ω⋅m.
A copper (resistivity = 1.72 EXP-8 Ω.m) conductor with a square cross section, 1.0 mm on a side is 100 m long and is initially 20oC. 1. If the temperature coefficient (a) of copper is 0.00393 per degree Celsius, what is the change in resistance of the copper conductor if the temperature is increased to 100 degrees Celsius? 2. What is the resistance of this conductor?
A copper wire has a circular cross section with a radius of 1.06 mm. (a) If the wire carries a current of 3.38 A, find the drift speed (in m/s) of electrons in the wire. (Take the density of mobile charge carriers in copper to be n = 1.10 ✕ 1029 electrons/m3.) ???m/s (b) For the same wire size and current, find the drift speed (in m/s) of electrons if the wire is made of aluminum with n = 2.11 ✕ 1029 electrons/m3. ???m/s
1.For copper, α = 3.9×10−3 ∘C−1. Suppose 2.5-m-long, 0.40-mm-diameter copper wire is connected across the terminals of a 1.5 V ideal battery. What is the current in the wire at 20∘C? 2.What is the rate, in A/∘C, at which the current changes with temperature as the wire heats up?