Problem 7 A double inverted U-tube manometer containing oil (SG = 0.8), mercury (SG = 13.6) and water is used to measure large pressure difference between gas in pipe B and gasoline in pipe A as shown in figure. Knowing that h₁ = 60 cm, h₂ = 87 cm, h3 = 35 cm, and h4 = 24 cm, determine the presure difference between A and B. Neglect the gas density and use Ywater = 9810 N/m³ for water. -Water sg=0.8 ha h3 +B AP Gasoline, h₁ sg=0.75 Mercury, sg= 13.6 Oil, 4*. Gas

Problem 7 A double inverted U-tube manometer containing oil (SG = 0.8), mercury (SG = 13.6) and water is used to measure large pressure difference between gas in pipe B and gasoline in pipe A as shown in figure. Knowing that h₁ = 60 cm, h₂ = 87 cm, h3 = 35 cm, and h4 = 24 cm, determine the presure difference between A and B. Neglect the gas density and use Ywater = 9810 N/m³ for water. -Water sg=0.8 ha h3 +B AP Gasoline, h₁ sg=0.75 Mercury, sg= 13.6 Oil, 4*. Gas

Name: Problem 7A double inverted U-tube manometer containing oil (SG = 0.8)
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Problem 7A double inverted U-tube manometer containing oil (SG = 0.8), mercury(SG = 13.6) and water is used to measure large pressure differencebetween gas in pipe B and gasoline in pipe A as shown in figure.Knowing that h₁ = 60 cm, h₂ = 87 cm, h3 =

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The gage pressure of air in a pressurized water tank is measured simultaneously by both a pressuregage and a manometer. The differential height h of the mercury column is to be determined. Assumptions The air pressure in the tank is uniform (i.e., its variation with elevation is negligible dueto its low density), and thus the pressure at the air-water interface is the same as the indicated gagepressure.
Describe the length and the cross-sectional area of the tube have no effect on the height of the fluid column of a barometer?
In order to measure the pressure difference between two points in a pipeline carrying water, an inverted U tube is connected to the points, and air under atmospheric pressure is entrapped in the upper portion of the U-tube. If the manometer deflection is 0.8 m and the downstream tapping is 0.5 m below the upstream point, find the pressure difference between the two points
Three types of fluids stack in an open tank as shown in the picture. If the specific gravidties are sg1=1.00, sg2=2.00, sg3=3.00, and h1=1.00 m, h2=1.00 m, h3=1.00 m, calculate the gage pressure at location 4, P4(gage)=_________(kPa)
A U-tube manometer is connected to a closed tank as shown. The air pressure in the tank is 0.25 psi and the liquid in the tank is oil (SG=0.6) . The pressure at point A is 1 psi. a. Determine the depth z (in feet) of oil in the tank. b. Determine the differential reading, h (in feet), on the manometer.
The manometer fl uid in Fig. is mercury. Estimatethe volume fl ow in the tube if the fl owing fl uid is ( a ) gasolineand ( b ) nitrogen, at 20 ° C and 1 atm.
Pressure in a water container can be measured by an open vertical tube. If the expected water rise is about 20cm. What tube diameter is needed to ensure the capillary action is less than 3%?
(D1) The client is considering the use of a manometer to measure the differential pressurebetween Tank A and Tank B for operational purposes.a) Given:s.g of A = 1.3s.g of B = 1.7s.g of manometric fluid = 1.9h1 = 1.45m, h2 = 0.75m and h = 0.4mExplain how the manometer depicted can be used to find the differential pressure between Tanks A andB. Additionally give two (2) limitations of using a manometer to measure pressure.
A U-tube containing mercury (sg = 13.6) has itsright-hand limb open to the atmosphere and the left-handlimb connected to a pipe conveying water under pressure,the difference in the level of mercury in the two limbs being200 mm. If the mercury level in the left-hand limb is 400 mmbelow the pipe's center line, find the pipeline's absolutepressure (kPa). Also, find the new difference in levels ofmercury in the U-tube if the pressure in the pipe falls by 2kPa.
A vertical, clean, glass piezometer tube has an insidediameter of 1 mm. When pressure is applied, water at20 ° C rises into the tube to a height of 25 cm. After correctingfor surface tension, estimate the applied pressurein Pa.
A gasoline line is connected to the pressure gage through a double-U manometer, as shown in the figure. If the reading of the pressure gage is 370 kPa, determine the gage pressure of the gasoline line.6)
PROBLEM 3: A venturi meter with a throat diameter of 6 cm is fitted in a horizontal pipeline of 12 cm diameter with oil of specific gravity 0.88 flowing from left to the right. The difference in level in the two limbs of a mercury manometer connected to the tapping points read 12 cm and the connecting pipes are filled with the same oil. (a) If two pressure gauges are fitted at tapping points, one at the throat and the other in the inlet. Determine the difference between the 2 gage pressure readings in kPa.