Q/ A 40-kVA, 3,300/240-V, 50 Hz, 1-phase transformerhas 660 turns on the primary. Determine:theofsecondary(a)(b) the(c) the approximate value of primary and secondary full-load currents.numberturnsonthemaximumvalueof flux inthecore

Given:E1=3300E2=240N1=660f=50 HzE2E1=N2N12403300=N2660N2=660×2403300=48Hence secondary turns 48

Q/ A 40-kVA, 3,300/240-V, 50 Hz, 1-phase transformer has 660 turns on the primary. Determine: the number of the secondary the (a) (b) (c) the approximate value of primary and secondary full- load currents. turns on the maximum value of flux in core

Q/ A 40-kVA, 3,300/240-V, 50 Hz, 1-phase transformer has 660 turns on the primary. Determine: the number of the secondary the (a) (b) (c) the approximate value of primary and secondary full- load currents. turns on the maximum value of flux in core

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.3MCQ: For an ideal 2-winding transformer, the ampere-turns of the primary winding, N1I1 is equal to the...

See similar textbooks

Related questions

Q: Choose which of the following current is in phase with the flux in the no load phasor diagram of…

A: At no load, transformer draws some current to meet no load losses.

Q: A 500 kVA, 6600/440 V, 50 Hz single phase core- type power transformer has maximum flux density of…

A: Given values are - Maximum Flux densityBm=1.5Wbm2Induced voltage per turnEN=30VFrequencyf=50Hz

Q: 1. What is the difference between power transformer and distribution transformer in core losses and…

A: Power transformers are generally high voltage transformers which are used stepping up and down of…

Q: b) Calculate the transformer core area that is required to limit the core flux density to 1.75T,…

A: We need to find area of given transformer

Q: Explain the Different connections of Three Phase Transformer including the working principle

A: Electrical machines can be either generator, motors or transformers. They can be either Ac machines…

Q: Report: 1.Compute the Core losses(no-load loss) of the Transformer. ? 2.Compute the exciting branch…

A: As per the policy , I am attempting the only first question as of my knowledge please ask the second…

Q: When conducting no-load test on a given single-phase transformer, the following test data were…

A: According to guideline we need to solve only first three subpart. Given, primary voltage = 230 V…

Q: 1. A single-phase, 250-kVA, 11-kV/415-V, 50-Hz transformer has 80 turns on the secondary. Calculate…

A: Step1 Rating = 250 KVA V1=11KV V2= 415 V secondary turns N=80f= 50HZ a) KVA rating =V1 I1…

Q: In a single-phase transformer supply voltage 230V, 60 Hz. The supply voltage side has 500 windings…

A: According to the question we need to calculate the value of the maximum amount of flux.

Q: 3. If a transformer is operated at rated frequency but at voltage higher than the rated value, how…

A: Given that the transformer is operating at a rated frequency but higher voltage The RMS value of…

Q: A core type transformer operates on 400 / 230 volt, 55 Hz supply. If the cross-sectional area of the…

Q: When conducting no-load test on a given single-phase transformer, the following test data were…

Q: A power transformer has 1000 primary turns and 100 secondary turns. The cross-sectioal area of the…

Q: A single-phase transformer is rated at 30 kVA. The transformer has full-load copper losses of 700 W…

Q: When rated voltage at rated frequency is applied to a single phase transformer the hysteresis and…

Q: Q/ A 40-kVA, 3,300/240-V, 50 Hz, 1-phase transformer has 660 turns on the primary. Determine: (a)…

A: Given, A 40-kVA, 3300/240 V. 50 Hz 1-phase transformer, E1E2=3300 V240 V Primary turns, N1= 600

Q: The magnetic core of a 100 kVA, 60 Hz core-type transformer is wound with 5268 turns on the HV side…

A: We are authorized to answer three subparts at a time, since you have not mentioned which part you…

Q: A 15-kVA, 2400/240-V transformer is to be tested to determine its excitation branch components, its…

A: Solution a)- Equivalent circuit of the transformer referred to high voltage side-

Q: (a) An ideal single-phase transformer has a rated voltage of 345 kV at the high side and 23 kV at…

Q: A single-phase transformer has 500 primary and 1200 secondary turns. The dimension of the core is 30…

Q: The amount of inrush current in the primary of a transformer is limited by the........, A- amount of…

Q: A 3000/200-V, 50-Hz, 1-phase transformer is built on a core having an effective cross-sectional area…

A: Given, A 3000/200-V, 50-Hz, 1-phase transformer Primary voltage, E1 = 3000 V Secondary voltage, E2 =…

Q: 5. A 1-phase transformer has 500 primary and 1200 secondary turns. The net cross-sectional area of…

A: The solution is given below

Q: the no load current I0 is in phase with the magnetic flux

Q: A core type transformer operates on 400 / 225 volt, 55 Hz supply. If the cross-sectional area of the…

Q: When conducting no-load test on a given single-phase transformer, the following test data were…

A: In this question , we will find no load equivalent parameters...Core loss current , magnetizing…

Q: A 22.5-kVA single-phase transformer is tested with a true-RMS ammeter and an ammeter that indicates…

A: Meters that respond to the average value use a rectifier to convert the alternating current into…

Q: 3/The core of a 300-kVA, 15000/650 V, 50-Hz, 1-ph, core type transformer has across- section of 30…

A: In the given question we note that The core of = 300 KVA , 1500/ 650 V Cross section area is…

Q: B1 A single-phase, 50 Hz transformer has 30 primary turns and 420 secondary turns. The cross-…

Q: Q1. what are the advantages of transferring parameters from 1 side of transformer to other side?…

A: Advantages of transferring parameters from 1 side of transformer to other side- 1.Easy to calculate…

Q: Q1: During the separation of transformer core losses experiment: 1. Why should always keep the ratio…

Q: When conducting no-load test on a given single-phase transformer, the following test data were…

Q: 9. The no-load current of a single-phase transformer is 5.0 A at 0.3 power factor when supplied from…

Q: The eddy current and hystresis losses in a 400V, 50HZ, single phase transformer is 500W and 900W…

A: TRANSFORMER: The transformer transfers power from one circuit to another circuit without a change…

Q: A core type transformer operates on 415 / 230 volt, 55 Hz supply. If the cross-sectional area of the…

A: The number of turns in primary winding is 47. The detailed solution is provided below.

Q: A 1100/170V, 50 HZ, 1-phase transformer with cross sectional area of the core is 30 cm? and maximum…

A: 1100/170V 50Hz frequency single phase transformer Emf= 4.44fN ×flux So no of turns N=?

Q: The eddy current and hysteresis losses of a 4400-V, 60-Hz, 10 distributio transformer are 280 W and…

Q: The core of a 30, 50-Hz, 11000/550-V, A-Y, 300 kVA, core-type transformer operates with a flux of…

A: In this question we will find full load high voltage phase current....

Q: (a) Consider the concept of magnetic circuit to explain the effect of air gap on the flow of flux.…

Q: The voltage per winding of the 220V/12V, 50 Hz single phase core transformer is 1V. If the maximum…

Q: A 36/240 V phase transformer, belonging to a phase measured from the no-load (idle) run and…

A: transformer ration is 36/240 V OC test performed on LV windings SC test performed on HV windings

Q: 4. Why the efficiency of the transformer is high at half load compared to full load?

A: TRANSFORMER: The transformer transfers power from one circuit to another circuit without a change…

Q: Calculate the total equivalent resistance, in terms of the primary winding, of a 10 to 1 ratio…

A: The transformer problem on basic turn ratio can be solved easily as shown below.

Q: 3.5 kV / 120V, 50 Hz, single phase transformer is to have an approximate e.m.f per turn of 33V and…

Q: A single-phase, 250-kVA, 11-kV/415-V, 50-Hz transformer has 80 turns on the secondary. Calculate (a)…

A: The solution is given below

Q: A core type transformer operates on 415/220 volt, 50 Hz supply. If the cross-sectional area of the…

Q: A single phase 400 V, 50 Hz transformer has an iron loss of 5000 W at the rated condition. When…

A: Given, A single phase transformer at 400 V, 50 Hz transformer has an iron loss, Pi=5000 W (first…

Q: 4. A single-phase, 50 Hz transformer has 25 primary turns and 300 secondary turns The…

Q: 5. Write down the equations of a single phase transformer at no-load mode. Give the names of the…

A: Transformer is a static device which is used to step up or down the voltage level or current level.…

Concept explainers

Three-Phase Transformers

Three-segment transformers are a type of transformer used to transform voltages of electrical systems into three ranges. Two type transformers are shell-type transformer and core type transformer. In brief, it could be described because of the exquisite kinds of configurations.

Transformer

Ever since electricity has been created, people have started using it in its entirety. We see many types of Transformers in the neighborhoods. Some are smaller in size and some are very large. They are used according to their requirements. Many of us have seen the electrical transformer but they do not know what work they are engaged in.

Question

Q/ A 40-kVA, 3,300/240-V, 50 Hz, 1-phase transformer
has 660 turns on the primary. Determine:
the
of
secondary
(a)
(b) the
(c) the approximate value of primary and secondary full-
load currents.
number
turns
on
the
maximum
value
of flux in
the
core

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A single-phase l0-kVA,2300/230-volt,60-Hz two-winding distribution transformer is connected as an autotransformer to step up the voltage from 2300 to 2530 volts (a) Draw a schematic diagram of this arrangement, showing all voltages and currents when delivering full load at rated voltage. (b) Find the permissible kVA rating of the autotransformer if the winding currents and voltages are not to exceed the rated values as a two-winding transformer. How much of this kVA rating is transformed by magnetic induction? (C) The following data are obtained from tests carried out on the transformer when it is connected as a two-winding transformer: Open-circuit test with the low-voltage terminals excited: Applied voltage =230V, input current =0.45A, input power =70W. Short-circuit test with the high-voltage terminals excited: Applied voltage =120, input current =4.5A, input power =240W. Based on the data, compute the efficiency of the autotransformer corresponding to full load, rated voltage, and 0.8 power factor lagging. Comment on why the efficiency is higher as an autotransformer than as a two-winding transformer.
Consider the single-line diagram of the power system shown in Figure 3.38. Equipment ratings are Generator 1: 1000MVA,18kV,X=0.2perunit Generator 2: 1000MVA,18kV,X=0.2p.u. Synchronous motor 3: 1500MVA,20kV,X=0.2p.u. Three-phase -Y transformers T1,T2,T3,T4,: 1000MVA,500kV,Y/20kV,X=0.1p.u. Three-phase YY transformer T5: 1500MVA,500kV,Y/20kVY,X=0.1p.u. Neglecting resistance, transformer phase shift, and magnetizing reactance, draw the equivalent reactance diagram. Use a base of 100 MA and 500 kV for the 50-ohm line. Determine the per-unit reactances.
For a short-circuit test on a 2-winding transformer, with one winding shorted, can you apply the rated voltage on the other winding? (a) Yes (b) No
Rework Problem 3.14 if the transformer is delivering rated load at rated secondary voltage and at (a) unity power factor, (b) 0.8 power factor leading. Compare the results with those of Problem 3.14. -
Three single-phase two-winding transformers, each rated 3kVA,220/110volts,60Hz, with a 0.10 per-unit leakage reactance, are connected as a three-phase extended autotransformer bank, as shown in Figure 3.36(c). The low-voltage winding has a 110 volt rating. (a) Draw the positive-sequence phasor diagram and show that the high-voltage winding has a 479.5 volt rating. (b) A three-phase load connected to the low-voltage terminals absorbs 6 kW at 110 volts and at 0.8 power factor lagging. Draw the per-unit impedance diagram and calculate the voltage and current at the high-voltage terminals. Assume positive-sequence operation.
Reconsider Problem 3.64 with the change that now Tb includes both a transformer of the same turns ratio as Ta and a regulating transformer with a 4 phase shift. On the base of Ta, the impedance of the two comp onents of Tb is jO.1 per unit. Determine the complex power in per unit transmitted to the load through each transformer. Comment on how the transformers share the real and reactive pors.
Consider the oneline diagram shown in Figure 3.40. The three-phase transformer bank is made up of three identical single-phase transformers, each specified by X1=0.24 (on the low-voltage side), negligible resistance and magnetizing current, and turns ratio =N2/N1=10. The transformer bank is delivering 100 MW at 0.8 p.f. lagging to a substation bus whose voltage is 230 kV. (a) Determine the primary current magnitude, primary voltage (line-to-line) magnitude, and the three-phase complex power supplied by the generator. Choose the line-to-neutral voltage at the bus, Va as the reference Account for the phase shift, and assume positive-sequence operation. (b) Find the phase shift between the primary and secondary voltages.
Using the method shown in this unit, what is the approximate short-circuit current available at the terminals of a 50-kVA single-phase transformer rated 120/240 volts? The transformer impedance is 1%. a. Line-to-line b. Line-to-neutral
Referring to the transformer connection in Question 9, if the center tap of the primary is connected to a neutral conductor on the incoming power, will it permit the secondary voltages to be balanced when single-phase loads are added?
For an ideal 2-winding transformer, the ampere-turns of the primary winding, N1I1 is equal to the ampere-turns of the secondary winding, N2I2 (a) True (b) False
The ideal transformer windings are eliminated from the per-unit equivalent circuit of a transformer. (a) True (b) False
A 50 MVA 230/115-kV, Δ-Y three-phase connected power transformer has a per unit resistance of 0.015 pu and a per-unit reactance of 0.006 pu. The excitation branch elements are RC = 125 pu and XM = 20 pu. What is the equivalent branch resistance, RC, in kΩ referred to the low-voltage side?