Q.2. For the composite bar shown in Fig. 2, find the total deformation in x and y directions due to the applied load and change in temperature (drop) of 80°C, knowing that (Es = 208 kN/mm?, E= 75 kN/mm2, a, = 11.7*106 mm/mm.C, a A = 23*10 mm/mm.°C, u,=0.29 and H=0.25. %3D D=200 mm Steel Aluminum 150 kN 150 kN 1.5m 1.5 m

Q.2. For the composite bar shown in Fig. 2, find the total deformation in x and y directions due to the applied load and change in temperature (drop) of 80°C, knowing that (Es = 208 kN/mm?, E= 75 kN/mm2, a, = 11.7106 mm/mm.C, a A = 2310 mm/mm.°C, u,=0.29 and H=0.25. %3D D=200 mm Steel Aluminum 150 kN 150 kN 1.5m 1.5 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A composite beam is constructed using a steel plate (14 mm ✕ 125 mm) with two wood beams (75 mm ✕ 125 mm) on either side. The wood and steel are securely fastened to act as a single beam. The beam is subjected to a positive bending moment Mz = 6.80 kN · m. Calculate the maximum tensile and compressive stresses in the wood and steel if Ew = 11 GPa and Es = 200 GPa. (Enter your answers in MPa. Use the deformation sign convention. Use the general theory for composite beams described in the textbook.) maximum tensile stress in wood MPa maximum tensile stress in steel MPa maximum compressive stress in wood MPa maximum compressive stress in steel MPa
Determine the moment of inertia (mm4) Īy of the area shown with respect to the vertical line that passes to the centroid of the composite area if a = 37 mm, b = 76 mm, and h = 148 mm. Round off only on the final answer expressed in whole number.
Calculate the modulus of elasticity of fiberglass under isostrain condition if the fiberglass consists of 70% E-glass fibers and 30% epoxy by volume. Also, calculate the percentage of load carried by the glass fibers. The moduli of elasticity of the glass fibers and the epoxy are 70.5 and 6.9 GPa, respectively. If a longitudinal stress of 60 MPa is applied on the composite with a cross-sectional area ofm300 mm2, what is the load carried by each of the fiber and the matrix phases? What is the strain sustained by each of the fiber and the matrix phases?
Determine, using the method of composite areas, the total second moments of area of of the composite about the y-axis [units^4].
Determine the x-bar centroid of the composite figure shown. Where x1=68; x2=100 and y=85
Calculate the modulus of elasticity of fiberglass under isostrain condition if the fiberglass consists of 70% E-glass fibers and 30% epoxy by volume. Also, calculate the percentage of load carried by the glass fibers. The moduli of elasticity of the glass fibers and the epoxy are 70.5 and 6.9 GPa, respectively. If a longitudinal stress of 60 MPa is applied on the composite with a cross-sectional area of 300 mm2, what is the load carried by each of the fiber and the matrix phases?What is the strain sustained by each of the fiber and the matrix phases?
Determine the moment of inertia (mm4) Īx of the area shown with respect to the horizontal line that passes to the centroid of the composite area if a = 30 mm, b = 76 mm, and h = 118 mm. Round off only on the final answer expressed in whole number.
The composite bar is subjected to a normal force P = 7500 lb as shown in the figure. The section of the composite bar is composed of two hollow tubes and a solid steel core. Determine the axial stress developed in each bar. Use Ecu = 18 x 106 psi, Est = 30 x 106 psi, and Ebr = 16 x 106 psi.
Concrete column is reinforced axially with eight steel bars as shown in fig. Each bar has a diameter of 25mm. If the applied load is (33) KN, compute the stress developed in each material. Es=180Gpa and Ec=12 Gpa
A RECTANGULAR ALUMINUM BLOCK IS 40mm LONG IN THE Y DIRECTION, 20mm WIDE IN THE Z DIRECTION AND 25mm THICK IN THE X DIRECTION. IT IS SUBJECTED TO A TRIAXIAL LOADING CONSISTING OF A UNIFORMLY DISTRIBUTED FORCE OF Px=3 (COMPRESSION), Py=6 (TENSION) AND Pz=9 (COMPRESSION) IN THE X, Y AND Z DIRECTIONS RESPECTIVELY. IF THE POISSON’S RATIO = 1/4 & E = 70 GPa, DETERMINE THE STRAINS IN THE X, Y AND Z DIRECTIONS. ALSO DETRMINE A SINGLE DISTRIBUTED FORCE IN THE Y DIRECTION THE WOULD PRODUCE THE SAME X DEFORMATION AS THE ORIGINAL.
The rigid beam ABC is suspended from two steel rods as shown and is initially horizontal. BF bar with a cross section of 143 mm^2 . The midpoint B of the beam is deflected 10 mm downward by the slow application of the force Q, after which the force is slowly removed. Knowing that the steel used for the rods is elastoplastic with E=200 GPa and σ_Y-300 MPa, determine (a) the required maximum value of Q and the corresponding position of the beam, (b) the final position of the beam.
Concrete column is reinforced axially with eight steel bars as shown in fig.3. Each bar has a diameter of 25mm. If the applied load is 23 KN, compute the stress developed in each material. Es=180Gpa and Ec=12 Gpa. Note that W is your registration number in KN.