Q1// A differential manometer is connected to two pipes as shown in Figure. The pipe A is containing carbon tetrachloride sp.gr. = 0.8 and the pipe B is contain an oil of sp.gr. = 1.594. Find the difference of mercury level if the pressure difference in the two pipes be 0.1 kg/cm2

Q1// A differential manometer is connected to two pipes as shown in Figure. The pipe A is containing carbon tetrachloride sp.gr. = 0.8 and the pipe B is contain an oil of sp.gr. = 1.594. Find the difference of mercury level if the pressure difference in the two pipes be 0.1 kg/cm2

Name: Q1// A differential manometer isconnected to two pipes as shown inFig
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Q1// A differential manometer isconnected to two pipes as shown inFigure. The pipe A is containing carbontetrachloride sp.gr. = 0.8 and the pipe B iscontain an oil of sp.gr. = 1.594. Find thedifference of mercury level if thepressure difference in t

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

ASAP pls dont round off initial values, round off final ans only ty. Calculate the absolute pressure in kPa at a depth of 8 m below the oil's free surface, with a barometric reading of 752 mm Hg.
Calculate the manometer reading (x) if the upper manometer reading is y = 400mm and the coarse density of mercury is 13.56
Determine the value of H if the pressure difference PA-PB = 100 kPa
Determine the absolute pressure in pa at a depyh of 6 m belowthe free surface when a barometer reads 760 mm mercury (sp.gr = 13.57).
Calculate the absolute pressure in kPa at a depth of 11 m below the oil's free surface, with a barometric reading of 752 mm Hg.
The pressure of water in a pipeline was measured by means of a simple manometer containing mercury. The mercury level in the open tube is 150 mm higher than that of the left tube. The height of water in the left tube is 39mm. Determine 1-The static pressure in the pipe in kN/m2 2-Head of water in meters =
what should be the gauge pressure and (b)the absolute pressure of water at depth 12m below the surface ? p water 1000kg/m3
(D1) The client is considering the use of a manometer to measure the differential pressurebetween Tank A and Tank B for operational purposes.a) Given:s.g of A = 1.3s.g of B = 1.7s.g of manometric fluid = 1.9h1 = 1.45m, h2 = 0.75m and h = 0.4mExplain how the manometer depicted can be used to find the differential pressure between Tanks A andB. Additionally give two (2) limitations of using a manometer to measure pressure.
A U-tube manometer is connected to a closed tank as shown. The air pressure in the tank is 0.25 psi and the liquid in the tank is oil (SG=0.6) . The pressure at point A is 1 psi. a. Determine the depth z (in feet) of oil in the tank. b. Determine the differential reading, h (in feet), on the manometer.
U - tube is used to pressure the difference in water channel. p1= 1000 kg/m3. The orange fluid in the U - tube has a density: p2= 2000 kg/m3. The height a = 10 cm and h = 15 cm. If the pressure at point ① is 111 kPa, what is the pressure at point ② ?
Pipe A contains gasoline (SG = 0.7), pipe B contains oil (SG = 0.9), and the manometer fluid is ,ercury. Determine the new differential reading if the pressure in pipe A is decreased 25 kPa, and the pressure in pipe B remains constant. The initial differential reading is 0.30 m. (Hydrostatic)
A water-filled U-tube manometer is used to measure the pressure inside a tank thatcontains air. The water level in the U-tube on the side that connects the tank is 1.5 mabove the base of the tank. The water level in the other side of the U-tube (which isopen to the atmosphere) is 0.6 m above the base. Determine the pressure within thetank.