Q/1/..The following offsets were taken at (15 m) intervals from a survey line to an irregular boundary line:[ 3.50, 4.30, 6.75, 5.25, 7.50, 8.80, 7.90, 6.40, 4.40, 3.25 ]m. Calculate the area enclosed between the survey line, the irregular boundary line, and the first and last offsets, by: (a) The trapezoidal rule. (b) Simpson's rule. (c) Midpoint ordinate rule.

Q/1/..The following offsets were taken at (15 m) intervals from a survey line to an irregular boundary line:[ 3.50, 4.30, 6.75, 5.25, 7.50, 8.80, 7.90, 6.40, 4.40, 3.25 ]m. Calculate the area enclosed between the survey line, the irregular boundary line, and the first and last offsets, by: (a) The trapezoidal rule. (b) Simpson's rule. (c) Midpoint ordinate rule.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

to find out the included angles in a closed survey PQRSTP, the following observations were made with the compass. calculate the included angles after correcting the local attractions line fore bearing(FB) back bearing(BB) PQ N 620 45/E S 62015/W QR N 210 00/W S 200 45/E RS N 710 30/W S 710 30/E ST S 390 00/W N 380 00/E TP S 540 30/E N 530 15/E
As per plan, the distance between two telephone poles is 2356.35 meters. If the location of one is known in the field and the second is to be laid with a 50 m tape known to be 0.02 meter too short, along an average ground slope of 2.5%. Determine the actual length to be laid along the ground surface.
Q21 -Compute the corrected elevations of all points if R.L. (known) of BM. ‘was (170.850 m) and R.L. (computed) of B.M. was (170.858 m), C = 10 using. the following data: - Point Distance R | O T s
SURVEYING From the following traverse: (Use 3 decimal point) LINE DISTANCE BEARING AB 370m N 15° E BC 648 S 86° E CD 470 S 19° W DA 585 N 78° W Calculate the area of the traverse by DPD method.
Fundamentals of Surveying Using a 30-m tape that is 0.05m too long, the laid-out distance from X to Y is 140.42m. What is the correct distance?
The slope lengths of the surveyed line that was measured in 2 sections are 48.23 m with zenith angle 8 32 and 34.26 m with 2 26 zenith angleFind the horizontal length of the survey line..
Surveying In order to locate the position (P) of a sounding boat, the angles APB & BPC subtended at P by three points A, B and C on the shore were measured with a sextant and found to be 28º 42’ 40” and 30º 28’ 20” respectively, the point B & P being on opposite of AC. The length of AB & BC scaled from a map were 662 m and 4662 m respectively, and the angle ABC was 60º 50’ 40”. Carry out all the necessary calculations to compute the distances PA, PB and PC.
Correct the survey data below for a closed traverse. LINE DISTANCE BEARING AB 495.85 m N 05°30’ E BC 850.62 m N 46°02’ E CD 855.45 m S 67°38’ E DE 1,020.87 m S 12°25’ E EF 1,117.26 m S 83°44’ W FA 660.08 m N 55°09’ W
Given the following traverse notes taken by a survey party, 1. Find the adjusted latitude for side DA using Transit rule a. - 184.08 m b. - 164.08 m c. - 144.08 m d. - 154.08 m 2. Find the adjustment for departure of side DA using Transit rule * a. -1.765 m b. -3.156 m c. -2.112 m d. -2.576 m 3. Find the adjusted distance for side DA using Transit rule * a. 271.84 m b. 278.84 m c. 279.6 m d. 288.84 m
1 - A, B and C are three triangulation stations whose positions were determined by the angle measured at station B to A and C, respectively. The distance BC was measured to be 1200 m long and CD is 965 m long. The azimuth of C from B is 140° and that of A from B is 286°30’. A sounding at F (south of three stations) was taken from a boat and the angle BFA and BFC were measured simutaneously by two sextants from the boat to the three stations ABC as 22°30’ and 28°15’, respectively. How far is F from B?
FUNDAMENTALS OF SURVEYING Triangulation stations A,B, C and D has the following observation angles. Angle Values ACB 50 deg BAD 20 deg BCD 30 deg ABC 50 deg CAD 60 deg a. Find the angle CDB b. Find the angle BDA c. Find the angle BDC
When measuring a distance AB, and with respective to facing towards point B when standing at point A, the first taping pin was placed 1.35 ft to the left of line AB, the second pin was set 1.89 ft left of line AB, and the third pin was set 1.52 ft to the right of the line AB as the survey team attempted to correct their prior placements badly. The recorded distance was 734.33 ft. Calculate the corrected distance. (Assume four taped segments, the first three 200 ft each.)