Q2) put (v) or (x) for the following and correct the wrong:1- It is not always a good idea to have low- voltage regulations, sometimes highimpedance and high voltage regulation transformers are deliberately used to reduce thefault voltages in circuit.2- In Ward Leonard Method the ampere turns are varied by varying the number of fieldturns. This type of arrangement is used in an electric traction system.3- Torque produced in the armature is directly proportional to the flux per pole and thefield current.4 - At the time of starting of all DC Motors, except for very small motors, a starter must beconnected in series with the armature.5- Transformer transfers electrical energy from one circuit to another through capacitivecoupled conductors (the transformer's coils).6- Total losses = variable+ constant (iron, mechanical and copper shunt field losses) +(series field and armature winding losses).27- Ph = Ke Bmax f² t²V in dc machine.%3DABMech. powerdevelopedin armatureOutputiron and FrictionlossesCu lossesInputpowerof motorÉgl, wattsVI watls8- Vph2 = kVph1 ,V12 = V3Vph2 = V3K Vph1= KVL1 in Y- Y transformer connection.

As per the guidelines given, We can only provide the solution of the first three questions in…

Q2) put (v) or (x) for the following and correct the wrong: 1- It is not always a good idea to have low- voltage regulations, sometimes high impedance and high voltage regulation transformers are deliberately used to reduce the fault voltages in circuit. 2- In Ward Leonard Method the ampere turns are varied by varying the number of field turns. This type of arrangement is used in an electric traction system. 3- Torque produced in the armature is directly proportional to the flux per pole and the field current.

Q2) put (v) or (x) for the following and correct the wrong: 1- It is not always a good idea to have low- voltage regulations, sometimes high impedance and high voltage regulation transformers are deliberately used to reduce the fault voltages in circuit. 2- In Ward Leonard Method the ampere turns are varied by varying the number of field turns. This type of arrangement is used in an electric traction system. 3- Torque produced in the armature is directly proportional to the flux per pole and the field current.

EBK ELECTRICAL WIRING RESIDENTIAL

19th Edition

ISBN:9781337516549

Author:Simmons

Publisher:Simmons

Chapter19: Special-purpose Outlets-water Pump, Water Heater

Section19.1: Water Pump And Branch Circuit

Problem 21R: Fill in the data for a 16-ampere electric motor, single-phase, no Code letters. a. Branch-circuit...

See similar textbooks

Similar questions

Now that a 1:15 step-up transformer is installed at the output of the generator and a 15: 1transformer is installed at the end of the transmission line, as depicted in Figure Q3(b). (i)Determine the new load voltage/generated voltage ratioand power loss in the transmission line. (ii)By assuming the transformer is ideal, evaluate your answers with those obtained in 3(a)
1-The power output of the three phase machine is greater than the single phase machine. (TRUE/FALSE) 2-In thermocouple, when both the junctions are at the same temperature, the potential difference developed across both junction is zero. (TRUE/FALSE) 3-Due to decreased armature m.m.f., the armature reaction during load condition will increase and hence field flux will be distorted. (TRUE/FALSE) 4-While applying voltage in CRO, the grid is positive with respect to cathode. (TRUE/FALSE) 5-Losses in transformers are generally low and thus efficiency is high. (TRUE/FALSE)
Explain how Kirchhoff's Current Law serves as the founding principle of a grounding strap.
a)Please explain the connection methods of Current and Voltage Transformers? b) Control the DC motor speed and direction. Draw the circuit.
A d.c. shunt machine has armature and field resistances of 0.025 Ω and 80 Ω respectively. When connected to constant 400-V bus-bars and driven as a generator at 450 r.p.m., it delivers 120 kW. Calculate its speed when running as a motor and absorbing 120 kW from the same bus-bars
The label values of the single-phase transformer whose electrical equivalent circuit is given below are 20 kVA, 15400V / 240V, 50 Hz. This transformer Calculate what is required below. a. What is the value of the active power measured in the short circuit test? b. What is the value of the active power measured in the idle test? c. Voltage regulation was found to be 0.1% at 0.8 back power factor. Accordingly, using any method you want Find out how many kVA the transformer draws from the network (primary apparent power).
13.a. A bridge circuit is used to measure the loss of larger transformers because the circuitA. promotes safety.B. eliminates calculations.C. increases measuring convenience.D. improves measurement accuracy.13.b. A synchronous machine is run as an unloaded motor. If a low voltage is supplied at the ratedfrequency, and if the full-load armature current flows, a test is being run to determine theA. windage loss.B. I²R loss.C. stray-load loss.D. core loss.
A Y- connected, 10-KVA, 230- has a field winding resistance of 4.59. At an operation of 0.85 lagging power factor, the excitation current is recorded at 10A. the core loss is 300W, and the mechanical loss is 200W. If the corresponding efficiency is 84.9%. calculate the per- phase armature winding resistance.
Armature windings in ac generators are same as those used in DC machines Select one: True False
Topic: VARIOUS TYPES OF TRANSFORMERS
Discuss the concept of load shedding in power systems. What are the reasons for implementing load shedding, and how is it controlled?
: Discuss the following statements briefly 1. After performing the load-test on the induction motor it clarified that the higher the load torque,the greater the current absorbed by the motor. 2. In practice, very few Y-Y transformers are used