Q2. A shunt generator gave the following results in the O.C.C. test at a speed of (800 r.p.m). If in A 1 5 10 E, in V 90 250 300 330 350 360 The field resistance is adjusted to (50 2) and the teminal voltage is (300 V) on load. Armature resistance is (0.1 2) and assuming that the flux is reduced by (5%) due to amature reaction, find the load supplied by the generator.

Q2. A shunt generator gave the following results in the O.C.C. test at a speed of (800 r.p.m). If in A 1 5 10 E, in V 90 250 300 330 350 360 The field resistance is adjusted to (50 2) and the teminal voltage is (300 V) on load. Armature resistance is (0.1 2) and assuming that the flux is reduced by (5%) due to amature reaction, find the load supplied by the generator.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

Q2: A500 kW, 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when AT4 / pole = 208 AT. If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A.
DC generators A separately excited D.C. generator has an armature circuit resistance of 0.1 ohms. And the total brush-drop is 2 V. When running at 1000 r.p.m., it delivers a current of 100 A at 250 V to a load of constant resistance. If the generator speed drop to 700 r.p.m., with field-current unaltered, find the current delivered to load.
A separately excited D.C. generator has an armature circuit resistance of 0.1 ohms. And the total brush-drop is 2 V. When running at 1000 r.p.m., it delivers a current of 100 A at 250 V to a load of constant resistance. If the generator speed drop to 700 r.p.m., with field-current unaltered, find the current delivered to load.
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
Dc machines A separately excited D.C. generator has an armature circuit resistance of 0.1 ohms. And the total brush-drop is 2 V. When running at 1000 r.p.m., it delivers a current of 100 A at 250 V to a load of constant resistance. If the generator speed drop to 700 r.p.m., with field-current unaltered, find the current delivered to load.
Two separately excited DC generators are connected in parallel to supply a total loed of 300 A The two generators have the following paraneters: GI R. - 0,250 and induced E.M.F-220 v G2 R = 0.32 and induced E.M.F-250 V Find Mathematicall: (1) The armature current of euch generator, The bus-bar voltage, (ii) The power shuring by each generator, (ii) Repeat (i) and (ii) if the load current decreases to 100A.
A 500 V, 250 kW, long shunt compound generator induces an e.m.f. of 480 V whenrunning at 1000 r.p.m. no load. On full load the spped of the machine drops to 975r.p.m. the flux increases by 15% and the terminal voltage rises to 500 V. If theseries and shunt field resistances are 0.02 ohm and 100 ohms respectively,calculate the armature resistance. Assume a voltage drop of 1V per brush.[Ans.
A series generator having a combined armature and field resistance of 0.4 ohm usrunning at 1000 rpm and delivering 5.5 kW at a terminal voltage of 110 V. If thespeed is raised to 1500 rpm and load adjusted to 10 kW, find the new terminalvoltage. Assume the machine is working on straight line portion of magnetizationcharacteristics.
A dc short shunt compound generator delivers 20 kW to a load at 500 V. The armature, series field and shunt field resistances are 0.01 Ω, 0.05 Ω, and 100 Ω. Find the power developed in the armature
A 220V shunt generator has an armature resistance of 0.02ohms and a shunt field resistance of 44ohms. at rate load, the driving engine develops 62.26hp. If the iron and friction losses amount to 1600W, how much is the current delivered to the load at this condition? (Our subject is ELECTRICAL MACHINE 1, and our lesson is Losses and Efficiency on the DC MACHINE) (I need a clean solution ma'am/sir. Thank you do much)
The modeling of a generator is usually giving by applying the swing equation of a synchronous machine. Show with diagrams how L.T. usually used to represent this model.
2. A 220-V long-shunt compound d.c. generator is supplying 100 A to a load. The resistances of the shunt field, the series field, and the armature are 50 ohms, 0.025 ohm, and 0.05 ohm respectively. Find the following: