Q2/Gas turbine unit having heat exchanger with thermal ratio(0.75),a high pressure stage turbine drives the compressor and a low pressure stage turbine generate the power. The overall pressure ratio is (5/1) and the maximum temperature is (1000 o c).The isentropic efficiencies of compressor, H.P.T and L.P.T are (0.7),(0.78) and (0.8) respectively and mechanical efficiency of both shafts is (99 %) . Calculate:

Q2/Gas turbine unit having heat exchanger with thermal ratio(0.75),a high pressure stage turbine drives the compressor and a low pressure stage turbine generate the power. The overall pressure ratio is (5/1) and the maximum temperature is (1000 o c).The isentropic efficiencies of compressor, H.P.T and L.P.T are (0.7),(0.78) and (0.8) respectively and mechanical efficiency of both shafts is (99 %) . Calculate:

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter22: Condensers

Section: Chapter Questions

Problem 8RQ: Four methods for controlling head pressure in an air-cooled condenser are ______, ______, _______,...

See similar textbooks

Similar questions

3) The pump works (wbomba) and the turbine (wurbina). 4) The heats: boiler (QH) and condenser (QL). 5) The thermal efficiency of this cycle.
A R134a vapour compression system includes a liquid suction heat exchanger in the system. The heat exchanger cools saturated liquid coming from the condenser from 31.31OC to 20OC with vapour which comes from the evaporator at –10.09OC. If the compressor is capable of pumping 20 L/s measured at the compressor suction, calculate (a) the COP of the system, (b) the cooling load, TOR, and (c) the work of compression, KW.
in a rankine cycle, steam enters the turbine at 2.5 mpa saturated vapor and condenser of 50 kpa, what is the thermal efficiency of the cycle
a steam 8.0 MPa and 485 degree Celsius enters the turbine and expand at condenser pressure of 0.006 mpa for cycle and 1kg of steam. determine heat added, work turbine, energy chargeable and i deal heat rate
In a Refrigerant 11 system ,one evaporator is to provide 210 kw of refrigerant at 0 0C and another evaporator is to provide 224 kw at -200C . The system uses two stage compression with intercooling and removal of flash gas. The condenser temp is 400C . Given that, h2=389kJ/kg, h4=416kJ/kg Compute the following: a.) mass flow rate at low stage compressor (m1)ANSWER: 1.25377 kg/s b.) mass flow rate at high stage compressor (m3)ANSWER: 2.90255 kg/s c.) low stage compressor workANSWER: 12.96406 kw d.) high stage compressor workANSWER: 78.68819 kw e.) total compressor workANSWER: 91.65226 kw f.) COPANSWER: 4.73528 g.) heat rejected in the condenserANSWER: 525.65226 kw
Cold storage uses R134a, the evaporator temperature is -7C and the condenser temperature is 32C. The cooling load is 5.3103 kJ/min. The cycle is ideal. Determine: 1. Mass flowrate of the refrigerant. 2. Coefficient of Performance (COP). - If the water condenser is used that enter at 24C and exit at 30C. determine the water flowrate.
In a refrigerant 11 system, one evaporator is to provide 256 kw of refrigerant at 0°C and another evaporator is to provide 228 kw at -20°C. The system uses two stage compression with intercooling and removal of flash gas. The condenser temp is 40°C. h2 = 393 kJ/kg, h4 = 412 kJ/kg Compute the ff:a. mass flow rate at low stage compressor (m1), answer must be in kg/sb. mass flow rate at high stage compressor (m3), answer must be in kg/sc. low stage compressor work, answer must be in kw
rankine cycle, the pressure and temperature entering the turbine is 1800 kpa and 380 degrees celsius and the pressure leaving the turbine is 20 kpa, the quality of steam entering the condenser is 90%. what is the turbine work in kj/kg at 1.8 mpa and 380 degrees celsius. engine turbine eff=85% mechanical ff=88% determine worknet,work brake, brake heat rate
A water feed pump operates with a mass flow rate of 464 kg/s. The inlet pressure is 689 kPa and the outlet pressure is 26 MPa. Water enters the pump at 422 K. Assuming an isentropic efficiency of 85%, estimate the power required to drive the pump.
a steam 8.0 mpa and 485 degrees celsius enter the turbine and expand at condenser pressure of 0.006 mpa for cycle and 1kg of steam. determine heat added, worknet, thermal efficienc, for the engine determine steam flow for an engine output of 40000 kw, work turbine, energy chargable, ideal heat rate
4. The open cycle gas turbine operate on Brayton cycle with pressure ratio 4.5/1. Air enter the compressor at 210C and heated to 7800C at entry to the turbine. If mass flow rate is 140kg/min, Determine: a. e b. Wnet
When a steam boiler generates saturated steam at 2.5 mpa and the condenser pressure is 20 kpa, what is the Rankine cycle efficiency?Show complete step-by-step process and solution.